18 research outputs found
Manipulation of N el vector in antiferromagnetic Mn2Au by electric current and magnetic field pulses
Imaging of current induced Néel vector switching in antiferromagnetic Mn2 Au
The effects of current induced Néel spin-orbit torques on the antiferromagnetic domain structure of epitaxial Mn2Au thin films were investigated by x-ray magnetic linear dichroism–photoemission electron microscopy. We observed current induced switching of antiferromagnetic domains essentially corresponding to morphological features of the samples. Reversible as well as irreversible Néel vector reorientation was obtained in different parts of the samples and the switching of up to 30% of all domains in the field of view of 10 μm is demonstrated. Our direct microscopical observations are compared to and fully consistent with anisotropic magnetoresistance effects previously attributed to current induced Néel vector switching in Mn2Au
Nonlinear terahertz N\'eel spin-orbit torques in antiferromagnetic MnAu
Antiferromagnets have large potential for ultrafast coherent switching of
magnetic order with minimum heat dissipation. In novel materials such as
MnAu and CuMnAs, electric rather than magnetic fields may control
antiferromagnetic order by N\'eel spin-orbit torques (NSOTs), which have,
however, not been observed on ultrafast time scales yet. Here, we excite
MnAu thin films with phase-locked single-cycle terahertz electromagnetic
pulses and monitor the spin response with femtosecond magneto-optic probes. We
observe signals whose symmetry, dynamics, terahertz-field scaling and
dependence on sample structure are fully consistent with a uniform in-plane
antiferromagnetic magnon driven by field-like terahertz NSOTs with a torkance
of (15050) cm/A s. At incident terahertz electric fields above 500
kV/cm, we find pronounced nonlinear dynamics with massive N\'eel-vector
deflections by as much as 30{\deg}. Our data are in excellent agreement with a
micromagnetic model which indicates that fully coherent N\'eel-vector switching
by 90{\deg} within 1 ps is within close reach.Comment: 16 pages, 4 figure
INSERT FOR HEAT-EXCHANGE PIPE
Вставка для теплообмінної труби виконана у вигляді пустотілого циліндра. На його стінках виконані прямокутні щілини, під пустотілим циліндром розташована прямокутна пластина, а над пустотілим циліндром встановлено дві шайби, на одній з яких виконані круглі отвори, причому пластина, пустотілий циліндр і шайби закріплено в теплообмінній трубі котла утримувачем.Вставка для теплообменной трубы выполнена в виде полого цилиндра. На его стенках выполнены прямоугольные щели, под полым цилиндром расположена прямоугольная пластина, а над полым цилиндром установлены две шайбы, на одной из которых выполнены круглые отверстия, причем пластина, полый цилиндр и шайбы закреплены в теплообменной трубе котла держателем.An insert for heat exchange pipe is arranged as hollow cylinder. At its walls rectangular slots are arranged, under hollow cylinder rectangular plate is placed, and over hollow cylinder two washers are installed, in one of those round openings are arranged, at that the plate, hollow cylinder and washers are fixed in heat exchange pipe of boiler with holder
WATER-HEATING BOILER
Водогрійний котел містить охолоджувальний корпус з кришкою та розташованими в ньому топкою і теплообмінником у вигляді газоходів зі вставками, які прикріплені до жорсткого стрижня, що має механізм переміщення. Вставки виконані у вигляді зігнутих гофрованих пластин. В нижній частині топки розташований пальник. На боковій поверхні розташовані патрубки для підведення і відведення води. Над теплообмінником розташована димова труба.Водогрейный котел содержит охлаждающий корпус с крышкой и расположенными в нем топкой и теплообменником в виде газоходов со вставками, которые прикреплены к жесткому стержню, который имеет механизм перемещения. Вставки выполнены в виде согнутых гофрированных пластин. В нижней части топки расположена горелка. На боковой поверхности расположены патрубки для подвода и отвода воды. Над теплообменником расположена дымовая труба.A water-heating boiler has a cooling body with cover and furnace and heat exchanger placed in it, as gas ducts with inserts attached to a rigid rod that has displacement mechanism. The inserts are arranged as bent corrugated plates. In the lower part of the furnace a burner is placed. On the side surface branch pipes for supply and discharge of water are placed. Over the heat exchanger chimney is placed
Heat exchange pipe
Теплообмінна труба містить турбулізатори у вигляді гнучких елементів. Гнучкі елементи виконані у вигляді скупчень тонких перекручених між собою дротів, розташованих на певній відстані один від одного і зафіксовані на металевому стержні.Теплообменная труба содержит турбулизаторы в виде гибких элементов. Гибкие элементы выполнены в виде скопления тонких, скрученных между собой, проводов, расположенных на определенном расстоянии один от другого и зафиксированых на металлическом стержне.Heat exchange pipe has turbulence simulators in form of flexible members. The flexible members are made as the bunches of thin wires twisted between them and placed at some distance one from the other and fixed on the metal core
Hot water boiler
Водогрійний котел містить корпус, камеру згоряння, камеру допалювання, теплообмінник, патрубки для підведення і відведення теплоносія, приєднані до водяної сорочки котла, патрубок виведення продуктів згоряння. Камера згоряння розташована над камерою допалювання, що виконана з термостійкого матеріалу. Камери з'єднані між собою через прямокутний канал, в якому розташовані отвори для підведення вторинного повітря, а отвори для підведення первинного повітря виконані в стінках камери згоряння, що також оснащена додатковим пальником для спалювання природного газу. Теплообмінник водогрійного котла виконано вертикальним та оснащено інтенсифікаторами теплообміну у вигляді пластин та розташовано над камерою допалювання біля камери завантаження. Над теплообмінником виконано патрубок виведення продуктів згоряння.Водогрейный котел содержит корпус, камеру сгорания, камеру дожигания, теплообменник, патрубки для подвода и отвода теплоносителя, подсоединенные к водной рубашке котла, патрубок вывода продуктов сгорания. Камера сгорания расположена над камерой дожигания, которая выполнена из термостойкого материала. Камеры соединены между собой через прямоугольный канал, в котором расположены отверстия для подвода вторичного воздуха, а отверстия для подвода первичного воздуха выполнены в стенках камеры сгорания, которая также оборудована дополнительной горелкой для сжигания природного газа. Теплообменник водогрейный котел выполнен вертикальным и оснащен интенсификаторами теплообмена в виде пластин и расположен над камерой дожигания возле камеры загрузки. Над теплообменником выполнен патрубок вывода продуктов сгорания.A hot water boiler includes a body, combustion chamber, afterburning chamber, heat exchanger, branch pipes for supply and discharge of heat carrier connected to the water jacket of the boiler, the branch pipe for discharge of combustion products. The combustion chamber is placed over the afterburning chamber made of thermo-stable material. The chambers are connected to each other through a rectangular channel where openings for supply of secondary air are placed, and the openings for supply of primary air are provided in the walls of the combustion chamber equipped as well with an additional burner for combustion of natural gas. The heat exchanger of the hot water boiler is arranged as vertical and is equipped with intensifiers of heat exchange as plates and is placed over the afterburning chamber near the loading chamber. Over the heat exchanger a branch pipe for discharge of combustion products is provided
Heat exchange pipe
Теплообмінна труба містить стрічкову спіраль на поверхні якої висічені сектори, утримувач.Теплообменная труба содержит ленточную спираль, на поверхности которой высечены секторы, держатель.A heat exchange pipe includes a strip spiral on the surface of which sectors are cut, a holder
HEAT EXCHANGE TUBE
Теплообмінна труба містить розміщений вздовж її осі струменевий розподілювач у вигляді зрізаного конуса з отворами на боковій поверхні. Поверхня конуса набрана з декількох зрізаних конусів різного діаметра, а верхня частина конуса закріплена в трубі за допомогою утримувача.Теплообменная труба содержит размещенный вдоль ее оси струйный распределитель в виде усеченного конуса с отверстиями на боковой поверхности. Поверхность конуса набрана из нескольких усеченных конусов разного диаметра, а верхняя часть конуса закреплена в трубе с помощью держателя.A heat exchange tube includes a jet distributor arranged along its axis, as a truncated cone with openings at the side surface. The surface of the cone is assembled of several truncated cones with different diameters, and the upper section of the body is fixed in the tube by means of a holder
Optically-triggered strain-driven N\'{e}el vector manipulation in a metallic antiferromagnet
The absence of stray fields, their insensitivity to external magnetic fields,
and ultrafast dynamics make antiferromagnets promising candidates for active
elements in spintronic devices. Here, we demonstrate manipulation of the
N\'{e}el vector in the metallic collinear antiferromagnet MnAu by combining
strain and femtosecond laser excitation. Applying tensile strain along either
of the two in-plane easy axes and locally exciting the sample by a train of
femtosecond pulses, we align the N\'{e}el vector along the direction controlled
by the applied strain. The dependence on the laser fluence and strain suggests
the alignment is a result of optically-triggered depinning of 90
domain walls and their sliding in the direction of the free energy gradient,
governed by the magneto-elastic coupling. The resulting, switchable, state is
stable at room temperature and insensitive to magnetic fields. Such an approach
may provide ways to realize robust high-density memory device with switching
timescales in the picosecond range