Photon-assisted spectroscopy of electronic interface states in perovskite oxide heterostructures

Complex oxides are an intriguing field of solid-state research, as they can exhibit a wide variety of functional properties, such as ferroelasticity, ferroelectricity, ferro- and antiferromagnetism or an even more complicated type of magnetic ordering, the combination or interaction of those ferroic properties (multiferroicity), high spin polarization, or high-temperature superconductivity. Thus they are prospective candidates for future materials in microelectronics. It is a matter of fact that the performance of such oxide-based devices depends mainly on transport properties, which in turn depend on the distribution and density of intrinsic or extrinsic electronic interface states across the device structure. The present thesis focuses on the identification and characterization of such electronic properties by two different photoassisted spectroscopy techniques: surface photovoltage spectroscopy and photoelectron spectroscopy. This work especially deals with perovskite oxides, namely with the model perovskite strontium titanate (SrTiO3) as a substrate and three differently doped lanthanum manganite thin films (10-15 nm thickness) grown by pulsed laser deposition (PLD) on the SrTiO3 substrate(La0.7Sr0.3MnO3, La0.7Ca0.3MnO3, La0.7Ce0.3MnO3). The first part aims at the identification of electronic surface and interface states at the free SrTiO3 surface as well as at the three different lanthanum manganite/SrTiO3 interfaces. For that purpose three different experimental realizations of the surface photovoltage spectroscopy technique were implemented and employed: photoelectron spectroscopy under additional optical excitation, the capacitive detection of the photoinduced displacement current in a parallel-plate capacitor geometry under modulated optical excitation, and the classical Kelvin probe technique. The methods are evaluated comparatively with respect to their suitability to analyze the given oxidic interfaces. The main result of this first part is a map of the energetic positions and relaxation time constants of the surface states at the SrTiO3 surface as well as of the interface states at the lanthanum manganite/SrTiO3 interfaces within the SrTiO3 bandgap. The interface states were classified into film- and substrate-induced states and it could be demonstrated that an appropriate annealing procedure can dramatically decrease their densities. The second part tackles the problem of the manganese valence and the doping type of di- and tetravalent-ion-doped LaMnO3. The question whether the insulating parent compound LaMnO3 becomes an electron-doped semiconductor after doping with tetravalent cations such as Ce4+ - which would be in analogy to the well-established hole doping after partial substitution of La3+ by divalent cations such as Sr2+ or Ca2+ - has been discussed controversially in the literature so far. Due to the physics of the manganite crystal lattice the question can also be formulated in a different way: Can part of the manganese ions be driven from the Mn3+ state towards the Mn2+ state without any crystal instabilities or phase separation phenomena? In order to contribute to the clarification of this question, an extensive X-ray- and UV-photoelectron spectroscopy (XPS/UPS) investigation was performed. The three differently doped lanthanum manganite thin films were comparatively studied considering the exchange splitting of the Mn 3s core level line, which is a linear function of the Mn valence, as measured by XPS and the work function as extracted from UPS. All measurements were performed at different states of deoxygenation after heating in ultrahigh vacuum and reoxidation after heating in a pure oxygen atmosphere. Strong evidence for electron doping of the La0.7Ce0.3MnO3 film after deoxygenation was found. Furthermore, the reversible tunability of the Mn valence by variation of the oxygen content could be demonstrated for both tetravalent- and divalent-ion-doped lanthanum manganite films.Oxidische Komplexverbindungen können eine Vielzahl an funktionellen Eigenschaften, wie z.B. Ferroelastizität, Ferroelektrizität, Ferro- und Antiferromagnetismus sowie kompliziertere magnetische Ordnungen, die Kombination und Interaktion solcher ferroischer Eigenschaften (Multiferroizität), hohe Spinpolarisation oder Hochtemperatursupraleitung aufweisen und gelten daher als aussichtsreiche Materialien für die zukünftige Mikroelektronik. Entscheidend für die Funktionsfähigkeit oxidischer Bauelemente sind deren elektronische Transporteigenschaften, die in äußerst sensibler Weise von der Verteilung und Dichte von ex- oder intrinsischen elektronischen Defektzuständen an Grenz- und Oberflächen innerhalb der Bauelementstruktur abhängen. Die vorliegende Arbeit beschäftigt sich mit der Spektroskopie solcher elektronischer Eigenschaften mittels photonenbasierter Methoden. Im Fokus stehen dabei perowskitische Oxide , speziell das Modellperowskit Strontiumtitanat (SrTiO3) als Substrat und darauf mittels gepulster Laserdeposition (PLD) abgeschiedene dünne Filme (10-15 nm Dicke) dotierter Lanthanmanganate (La0.7Sr0.3MnO, La0.7Ca0.3MnO3, La0.7Ce0.3MnO3). Im Rahmen einer halbleiterphysikalischen Interpretation widmet sich der erste Teilder Identifikation elektronischer Ober- und Grenzflächenzustände an der SrTiO3-Oberfläche sowie an verschiedenen Lanthanmanganat/SrTiO3-Grenzflächen mittels dreier unterschiedlicher experimenteller Methoden zur Vermessung der Oberflächenphotospannung: der Photoelektronenspektroskopie unter zusätzlicher optischer Anregung, einer kapazitiven Detektionsmethode in Plattenkondensatorgeometrie unter modulierter optischer Anregung und der optischen Kelvin-Sonde. Neben einem auf die bei oxidischen Ober- und Grenzflächen auftretenden besonderen Herausforderungen zugeschnittenen Methodenvergleich werden Grenzflächenzustände bezüglich ihrer energetischen Position in der Bandlücke des SrTiO3 und ihres Relaxationsverhaltens analysiert, als substrat- oder filminduziert klassifiziert, und die Verringerung ihrer Dichte nach geeigneter Ausheilprozedur wird nachgewiesen. Der zweite Teil der Arbeit befasst sich mit der in der Literatur bisher kontrovers diskutierten Frage, ob sich die isolierende Stammverbindung LaMnO3 durch Dotierung mit tetravalenten Kationen, wie z.B. Ce4+, in einen elektronendotierten Halbleiter verwandeln lässt - analog zur Herstellung lochdotierter Lanthanmanganate durch Dotierung mit divalenten Kationen, wie z.B. Sr2+ oder Ca2+. Die Frage ist äquivalent zur Betrachtung, ob unter Beibehaltung der Stabilität des Kristallgitters ein Teil der Manganionen vom Mn3+-Zustand in den Mn2+-Zustand übergehen kann. Um einen Beitrag zur Klärung dieses Problems zu leisten, wurden als elektronisch sensitive Methoden die Röntgen- und UV-Photoelektronenspektroskopie (XPS/UPS) gewählt. Die oben genannten Lanthanmanganatfilme wurden dazu hinsichtlich der Austauschaufspaltung der Mangan-3s-Linie im XP-Spektrum, die in linearer Weise von der Manganvalenz abhängt, und der anhand der Breite des UP-Spektrums ermittelten Austrittsarbeit jeweils nach Reinigung der Oberfläche im Ultrahochvakuum (UHV) vergleichend untersucht. Die Messungen wurden nach unterschiedlich starker Desoxidation durch Heizen im UHV und Reoxidierung durch Heizen in Sauerstoffatmosphäre durchgeführt. Es konnte nachgewiesen werden, dass eine Elektronendotierung des La0.7Ce0.3MnO3-Films bei geeigneter Einstellung des Sauerstoffgehalts tatsächlich möglich ist. Außerdem wurde gezeigt, dass sich sowohl in di- als auch in tetravalent dotierten Lanthanmanganatfilmen die Manganvalenz und damit der Dotierungstyp reversibel durchstimmen lässt

Realization of radiobiological in vitro cell experiments at conventional X-ray tubes and unconventional radiation sources

[no abstract available

Realization of radiobiological in vitro cell experiments at conventional X-ray tubes and unconventional radiation sources

More than hundred years after the discovery of X-rays different kinds of ionizing radiation are ubiquitous in medicine, applied to clinical diagnostics and cancer treatment as well. Irrespective of their nature, the widespread application of radiation implies its precise dosimetric characterization and detailed knowledge of the radiobiological effects induced in cancerous and normal tissue. Starting with in vitro cell irradiation experiments, which define basic parameters for the subsequent tissue and animal studies, the whole multi-stage process is completed by clinical trials that translate the results of fundamental research into clinical application. In this context, the present dissertation focuses on the establishment of radiobiological in vitro cell experiments at unconventional, but clinical relevant radiation qualities. In the first part of the present work the energy dependent biological effectiveness of photons was studied examining low-energy X-rays (≤ 50 keV), as used for mammography, and high-energy photons (≥ 20 MeV) as proposed for future radiotherapy. Cell irradiation experiments have been performed at conventional X-ray tubes providing low-energy photons and 200 kV reference radiation as well. In parallel, unconventional quasi-monochromatic channeling X-rays and high-energy bremsstrahlung available at the radiation source ELBE of the Forschungszentrum Dresden-Rossendorf were considered for radiobiological experimentation. For their precise dosimetric characterization dosimeters based on the thermally stimulated emission of exoelectrons and on radiochromic films were evaluated, whereas just the latter was found to be suitable for the determination of absolute doses and spatial dose distributions at cell position. Standard ionization chambers were deployed for the online control of cell irradiation experiments. Radiobiological effects were analyzed in human mammary epithelial cells on different subcellular levels revealing an increasing amount of damage for decreasing photon energy. For this reason, the assumed photon energy dependence was reconfirmed for a cell line other than human lymphocytes, an important finding that was discussed on the 2007 Retreat of the German Commission on Radiological Protection. After successful finalization of the photon experiments the focus of the present dissertation was directed to the realization of in vitro cell irradiation experiments with laser-accelerated electrons. This research was carried out in the frame of the project onCOOPtics that aims on the development of laser-based particle accelerators, which promise accelerators of potentially compact size and more cost-effectiveness suitable for a widespread medical application, especially for high precision hadron therapy. The unique properties, i.e., the ultrashort bunch length and resultant ultrahigh pulse dose rate, of these unconventional particle accelerators demand for extensive investigations with respect to potential effects on the dosimetric and radiobiological characterization. Based on the experiences gained at ELBE first experiments on the radiobiological characterization of laser-accelerated electrons have been performed at the Jena Titanium:Sapphire laser system. After beam optimization, a sophisticated dosimetry system was established that allow for the online control of the beam parameters and for the controlled delivery of dose to the cell sample. Finally, worldwide first systematic in vitro cell irradiation experiments were carried out resulting in a reduced biological effectiveness for laser-accelerated electrons relative to the 200 kV X-ray reference, irrespectively on the biological effect and cell lines examined. These successful results are the basis for future in vivo studies and experiments with laser-accelerated protons

Membrane inserted APP fragments containing the βA4 sequence of Alzheimer's disease do not aggregate

AbstractPreviously we have shown that the COOH-terminal fragment (A4CT) of the Alzheimer amyloid protein precursor (APP), which at the NH2-terminus carries the sequence of the amyloid βA4 protein, forms highly insoluble aggregates [EMBO J. (1988) 7, 949–957]. Here we report that aggregation is prevented if A4CT is expressed in vitro with a signal sequence at the NH2-terminus (SPA4CT) under conditions which allow membrane insertion. Aggregates from SPA4CT are obtained after removal of membranes by chloroform/methanol extraction or heating