517 research outputs found
采用全联热-机械有限元模型计算盘式制动器尖叫声的预测工具 (A Predictive Tool to Evaluate Disk Brake Squeal Using A Fully Coupled Thermo--Mechanical Finite Element Model)
This paper presents a new integrated approach to the analysis of brake squeal modelling.It focuses on developing a validated thermo—mechanical finite element model by taking full account of the effect of thermal loading on the structural response of the brake.An integrated study involving time—dependent non—linear contact and a fully coupled transient thermal analysis are carried out to provide the contact and temperature distribution within the brake before executing an instability study using the complex eigenvalue technique.The results,in turn demonstrate the fugitive nature of brake squeal through the system eigenvalues that are extracted throughout the braking period.
(摘要: 本文提出一个制动器尖叫模拟的新的综合方法, 它集中开发采用全考虑制动器结构响应热.负荷的影响的正确的热-机械有限元模型. 该综合研究包括实现与时间有关的非线性接触和全联.瞬态热分析, 在进行不稳定研究前, 采用复杂固有值技术, 提供在制动器内的接触和温度分布. 其结果依次通过制动全部系统固有值证实制动尖叫性质的变化.
Internal Kinematics of Luminous Compact Blue Galaxies
We describe the dynamical properties which may be inferred from HST/STIS
spectroscopic observations of luminous compact blue galaxies (LCBGs) between
0.1<z<0.7. While the sample is homogeneous in blue rest-frame color, small size
and line-width, and high surface-brightness, their detailed morphology is
eclectic. Here we determine the amplitude of rotation versus random, or
disturbed motions of the ionized gas. This information affirms the accuracy of
dynamical mass and M/L estimates from Keck integrated line-widths, and hence
also the predictions of the photometric fading of these unusual galaxies. The
resolved kinematics indicates this small subset of LCBGs are dynamically hot,
and unlikely to be embedded in disk systems.Comment: To appear in "Starbursts: from 30 Doradus to Lyman Break Galaxies"
2005, eds. R. de Grijs and R. M. Gonzalez Delgado (Kluwer
Tribo-oxidation of a brake friction couple under varying sliding conditions
This study explores a common parameter that is used to describe the energy input into a friction pairing in pin-on-disc investigations, the pv-value. The impacts of multiple sliding speed, v, and contact pressure, p, combinations were investigated while keeping their product, the pv-value at a constant level. The chosen tests for this study consisted of steady-state drag braking applications on a small-scale test bench. The actual contact area on the friction material's surface was measured after the tests and correlated to the steady-state temperature, T, that was reached during testing. The tribological interface showed sensitivity towards the different sliding and loading conditions including a shift in oxidising states of the iron contents of the friction couples. The sliding and loading conditions were reversed after the transition of oxidising states in order to investigate their impact. The results show that the oxidising states dynamically react to the operating conditions, but the overall frictional performance of the system can remain at an altered level due to enduring changes in the actual contact area and the thermal response of the friction couple with the transition in oxidising states
Vectorial bending characteristics of long-period grating written in D-shaped fibre
The curvature- or bend-sensing response of long-period gratings (LPG) UV-inscribed in D-shaped fiber has been investigated experimentally. Strong fiber orientation dependence of the spectral response when such LPGs are subjected to dynamic bending has been observed and is shown to form the basis for new vector sensors
Fiber Bragg gratings of type I in SMF-28 and B/Ge fibre and type IIA B/Ge fibre under gamma radiation up to 0.54 MGy
The sensitivities of type I and IIA fibre Bragg gratings written to different reflectivities in SMF-28 and B/Ge fibres to ionizing radiation up to 0.54MGy are investigated. The Bragg wavelength shows a small and rapid increase at the start of irradiation followed by either a plateau (type I) or a decrease (type IIA)
Differential birefringence in Bragg gratings in multicore fiber under transverse stress
We present experimental measurements of the peak splitting of the reflection spectra of fiber Bragg gratings as a result of birefringence induced by transverse loading of a multicore fiber. Measurements show that the splitting is a function of the applied load and the direction of the load relative to the azimuth of the fiber. A model for calculating the stress in the fiber that is due to an applied load is in good agreement with our experimental observations
Dynamic two-axis curvature measurement using multicore fiber Bragg gratings interrogated by arrayed waveguide gratings
We describe the use of arrayed waveguide gratings (AWGs) in the interrogation of fiber Bragg gratings (FBGs) for dynamic strain measurement. The ratiometric AWG output was calibrated in a static deflection experiment over a ±200 με range. Dynamic strain measurement was demonstrated with a FBG in a conventional single-mode fiber mounted on the surface of a vibrating cantilever and on a piezoelectric actuator, giving a resolution of 0.5 με at 2.4 kHz. We present results of this technique extended to measure the dynamic differential strain between two FBG pairs within a multicore fiber. An arbitrary cantilever oscillation of the multicore fiber was determined from curvature measurements in two orthogonal axes at 1125 Hz with a resolution of 0.05 m-1. © 2006 Optical Society of America
Strain and temperature sensitivity of a single-mode polymer optical fiber
We have measured the optical phase sensitivity of fiber based on poly(methyl methacrylate) under near-single-mode conditions at 632.8 nm wavelength. The elongation sensitivity is 131±3 × 105 rad m-1 and the temperature sensitivity is -212±26 rad m -1 K-1. These values are somewhat larger than those for silica fiber and are consistent with the values expected on the basis of the bulk polymer properties. © 2005 Optical Society of America
Accumulation and reactions of H2O2 during the copper ion catalysed autoxidation of cysteine in alkaline medium
Radial deformation measurement of a cylinder under compression using multicore fibre
A multicore fibre (MCF) sensor to measure the radial deformation of a compliant cylinder under compression is presented. The sensor is connectorised and need not be permanently bonded to the test object. A differential measurement technique using FBGs written into the MCF makes the sensor temperature insensitive. FBG measurement of axial strain of a cylinder under compression is also reported
- …