Dependence of the colored frequency noise in spin torque oscillators on current and magnetic field

The nano-scale spin torque oscillator (STO) is a compelling device for on-chip, highly tunable microwave frequency signal generation. Currently, one of the most important challenges for the STO is to increase its longer-time frequency stability by decreasing the 1/f frequency noise, but its high level makes even its measurement impossible using the phase noise mode of spectrum analyzers. Here, we present a custom made time-domain measurement system with 150MHz measurement bandwidth making possible the investigation of the variation of the 1/f as well as the white frequency noise in a STO over a large set of operating points covering 18-25GHz. The 1/f level is found to be highly dependent on the oscillation amplitude-frequency non-linearity and the vicinity of unexcited oscillation modes. These findings elucidate the need for a quantitative theoretical treatment of the low-frequency, colored frequency noise in STOs. Based on the results, we suggest that the 1/f frequency noise possibly can be decreased by improving the microstructural quality of the metallic thin films. (C) 2014 AIP Publishing LLC

A critical psychology of the postcolonial

Of the theoretical resources typically taken as the underlying foundations of critical social psychology, elements, typically, each of Marxism, feminism, psychoanalysis, and Post-Structuralism, one particular mode of critique remains notably absent: postcolonial theory. What might be the most crucial contributions that postcolonial critique can make to the project of critical psychology? One answer is that of a reciprocal forms of critique, the retrieval of a ‘psychopolitics’ in which we not only place the psychological within the register of the political, but - perhaps more challengingly - in which the political is also, strategically, approached through the register of the psychological. What the writings of Fanon and Biko make plain in this connection is the degree to which the narratives and concepts of the social psychological may be reformulated so as to fashion a novel discourse of resistance, one that opens up new avenues for critique for critical psychology, on one hand, and that affords an innovative set of opportunities for the psychological investigation of the vicissitudes of the postcolonial, on the othe

Dependence of the colored frequency noise in spin torque oscillators on current and magnetic field

The nano-scale spin torque oscillator (STO) is a compelling device for on-chip, highly tunable microwave frequency signal generation. Currently, one of the most important challenges for the STO is to increase its longer-time frequency stability by decreasing the 1/f frequency noise, but its high level makes even its measurement impossible using the phase noise mode of spectrum analyzers. Here, we present a custom made time-domain measurement system with 150MHz measurement bandwidth making possible the investigation of the variation of the 1/f as well as the white frequency noise in a STO over a large set of operating points covering 18-25GHz. The 1/f level is found to be highly dependent on the oscillation amplitude-frequency non-linearity and the vicinity of unexcited oscillation modes. These findings elucidate the need for a quantitative theoretical treatment of the low-frequency, colored frequency noise in STOs. Based on the results, we suggest that the 1/f frequency noise possibly can be decreased by improving the microstructural quality of the metallic thin films. (C) 2014 AIP Publishing LLC

Magnetic graphene/Ni-nano-crystal hybrid for small field magnetoresistive effect synthesized via electrochemical exfoliation/deposition technique

Two-dimensional heterostructures of graphene (Gr) and metal/semiconducting elements convey new direction in electronic devices. They can be useful for spintronics because of small spin orbit interaction of Gr as a non-magnetic metal host with promising electrochemical stability. In this paper, we demonstrate one-step fabrication of magnetic Ni-particles entrapped within Gr-flakes based on simultaneous electrochemical exfoliation/deposition procedure by two-electrode system using platinum as the cathode electrode and a graphite foil as the anode electrode. The final product is an air stable hybrid element including Gr flakes hosting magnetic Ni-nano-crystals showing superparamagnetic-like response and room temperature giant magnetoresistance (GMR) effect at small magnetic field range. The GMR effect is originated from spin scattering through ferromagnetic/non-magnetic nature of Ni/Gr heterostructure and interpreted based on a phenomenological spin transport model. Our work benefits from XRD, XPS, Raman, TEM, FTIR and VSM measurements We addressed that how our results can be used for rapid manufacturing of magnetic Gr for low field magneto resistive elements and potential printed spintronic devices

Magnetic graphene/Ni-nano-crystal hybrid for small field magnetoresistive effect synthesized via electrochemical exfoliation/deposition technique

Two-dimensional heterostructures of graphene (Gr) and metal/semiconducting elements convey new direction in electronic devices. They can be useful for spintronics because of small spin orbit interaction of Gr as a non-magnetic metal host with promising electrochemical stability. In this paper, we demonstrate one-step fabrication of magnetic Ni-particles entrapped within Gr-flakes based on simultaneous electrochemical exfoliation/deposition procedure by two-electrode system using platinum as the cathode electrode and a graphite foil as the anode electrode. The final product is an air stable hybrid element including Gr flakes hosting magnetic Ni-nano-crystals showing superparamagnetic-like response and room temperature giant magnetoresistance (GMR) effect at small magnetic field range. The GMR effect is originated from spin scattering through ferromagnetic/non-magnetic nature of Ni/Gr heterostructure and interpreted based on a phenomenological spin transport model. Our work benefits from XRD, XPS, Raman, TEM, FTIR and VSM measurements We addressed that how our results can be used for rapid manufacturing of magnetic Gr for low field magneto resistive elements and potential printed spintronic devices