355 research outputs found
Expanded-beam connector design study
A theoretical analysis of an expanded-beam connector is presented, and it is shown that considerable scope exists for optimization of the design. A ray-tracing technique is used to quantify the importance of various parameters in determining the insertion loss. The design guidelines are presented in graphical form, and their usefulness is demonstrated in several examples of practical interest
Low-altitude measurements of 2–6 MeV electron trapping lifetimes at 1.5 ≤ L ≤ 2.5
During the Halloween Storm period (October–November 2003), a new Van Allen belt electron population was powerfully accelerated. The inner belt of electrons formed in this process decayed over a period of days to years. We have examined quantitatively the decay rates for electrons seen in the region of 1.5 ≤ L ≤ 2.5 using SAMPEX satellite observations. At L = 1.5 the e-folding lifetime for 2–6 MeV electrons was τ ∼ 180 days. On the other hand, for the half-dozen distinct acceleration (or enhancement) events seen during late-2003 through 2005 at L ∼ 2.0, the lifetimes ranged from τ ∼ 8 days to τ ∼ 35 days. We compare these loss rates to those expected from prior studies. We find that lifetimes at L = 2.0 are much shorter than the average 100–200 days that present theoretical estimates would suggest for the overall L = 2 electron population. Additional wave-particle interaction aspects must be included in theoretical treatments and we describe such possibilities here
Spaces of finite element differential forms
We discuss the construction of finite element spaces of differential forms
which satisfy the crucial assumptions of the finite element exterior calculus,
namely that they can be assembled into subcomplexes of the de Rham complex
which admit commuting projections. We present two families of spaces in the
case of simplicial meshes, and two other families in the case of cubical
meshes. We make use of the exterior calculus and the Koszul complex to define
and understand the spaces. These tools allow us to treat a wide variety of
situations, which are often treated separately, in a unified fashion.Comment: To appear in: Analysis and Numerics of Partial Differential
Equations, U. Gianazza, F. Brezzi, P. Colli Franzone, and G. Gilardi, eds.,
Springer 2013. v2: a few minor typos corrected. v3: a few more typo
correction
Polar observations of transverse magnetic pulsations initiated at substorm onset in the high-latitude plasma sheet
Recommended from our members
Solar wind-magnetosphere energy input functions
A new formula for the solar wind-magnetosphere energy input parameter, P/sub i/, is sought by applying the constraints imposed by dimensional analysis. Applying these constraints yields a general equation for P/sub i/ which is equal to rho V/sup 3/l/sub CF//sup 2/F(M/sub A/,theta) where, rho V/sup 3/ is the solar wind kinetic energy density and l/sub CF//sup 2/ is the scale size of the magnetosphere's effective energy ''collection'' region. The function F which depends on M/sub A/, the Alfven Mach number, and on theta, the interplanetary magnetic field clock angle is included in the general equation for P/sub i/ in order to model the magnetohydrodynamic processes which are responsible for solar wind-magnetosphere energy transfer. By assuming the form of the function F, it is possible to further constrain the formula for P/sub i/. This is accomplished by using solar wind data, geomagnetic activity indices, and simple statistical methods. It is found that P/sub i/ is proportional to (rho V/sup 2/)/sup 1/6/VBG(theta) where, rho V/sup 2/ is the solar wind dynamic pressure and VBG(theta) is a rectified version of the solar wind motional electric field. Furthermore, it is found that G(theta), the gating function which modulates the energy input to the magnetosphere, is well represented by a ''leaky'' rectifier function such as sin/sup 4/(theta/2). This function allows for enhanced energy input when the interplanetary magnetic field is oriented southward. This function also allows for some energy input when the interplanetary magnetic field is oriented northward. 9 refs., 4 figs
Evolution of precipitates, in particular cruciform and cuboid particles, during simulated direct charging of thin slab cast vanadium microalloyed steels
A study has been undertaken of four vanadium based steels which have been processed by a simulated direct charging route using processing parameters typical of thin slab casting, where the cast product has a thickness of 50 to 80mm ( in this study 50 mm) and is fed directly to a furnace to equalise the microstructure prior to rolling. In the direct charging process, cooling rates are faster, equalisation times shorter and the amount of deformation introduced during rolling less than in conventional practice. Samples in this study were quenched after casting, after equalisation, after 4th rolling pass and after coiling, to follow the evolution of microstructure. The mechanical and toughness properties and the microstructural features might be expected to differ from equivalent steels, which have undergone conventional processing. The four low carbon steels (~0.06wt%) which were studied contained 0.1wt%V (V-N), 0.1wt%V and 0.010wt%Ti (V-Ti), 0.1wt%V and 0.03wt%Nb (V-Nb), and 0.1wt%V, 0.03wt%Nb and 0.007wt%Ti (V-Nb-Ti). Steels V-N and V-Ti contained around 0.02wt% N, while the other two contained about 0.01wt%N. The as-cast steels were heated at three equalising temperatures of 1050C, 1100C or 1200C and held for 30-60 minutes prior to rolling. Optical microscopy and analytical electron microscopy, including parallel electron energy loss spectroscopy (PEELS), were used to characterise the precipitates. In the as-cast condition, dendrites and plates were found. Cuboid particles were seen at this stage in Steel V-Ti, but they appeared only in the other steels after equalization. In addition, in the final product of all the steels, fine particles were seen, but it was only in the two titanium steels that cruciform precipitates were present. PEELS analysis showed that the dendrites, plates, cuboids, cruciforms and fine precipitates were essentially nitrides. The two Ti steels had better toughness than the other steels but inferior lower yield stress values. This was thought to be, in part, due to the formation of cruciform precipitates in austenite, thereby removing nitrogen and the microalloying elements which would have been expected to precipitate in ferrite as dispersion hardening particles
Nondissipative Drag Conductance as a Topological Quantum Number
We show in this paper that the boundary condition averaged nondissipative
drag conductance of two coupled mesoscopic rings with no tunneling, evaluated
in a particular many-particle eigenstate, is a topological invariant
characterized by a Chern integer. Physical implications of this observation are
discussed.Comment: 4 pages, no figure. Title modified and significant revision made to
the text. Final version appeared in PR
Correlation of pre-hematopoietic cell transplant (HCT) pro-inflammatory cytokines in bronchioalveolar lavage (BAL) fluid with pulmonary complications following HCT in patients with inherited metabolic storage disorders (IMSDs)
Anthropogenic Space Weather
Anthropogenic effects on the space environment started in the late 19th
century and reached their peak in the 1960s when high-altitude nuclear
explosions were carried out by the USA and the Soviet Union. These explosions
created artificial radiation belts near Earth that resulted in major damages to
several satellites. Another, unexpected impact of the high-altitude nuclear
tests was the electromagnetic pulse (EMP) that can have devastating effects
over a large geographic area (as large as the continental United States). Other
anthropogenic impacts on the space environment include chemical release ex-
periments, high-frequency wave heating of the ionosphere and the interaction of
VLF waves with the radiation belts. This paper reviews the fundamental physical
process behind these phenomena and discusses the observations of their impacts.Comment: 71 pages, 35 figure
The Strong CP Problem and Axions
I describe how the QCD vacuum structure, necessary to resolve the
problem, predicts the presence of a P, T and CP violating term proportional to
the vacuum angle . To agree with experimental bounds, however,
this parameter must be very small ). After briefly
discussing some possible other solutions to this, so-called, strong CP problem,
I concentrate on the chiral solution proposed by Peccei and Quinn which has
associated with it a light pseudoscalar particle, the axion. I discuss in
detail the properties and dynamics of axions, focusing particularly on
invisible axion models where axions are very light, very weakly coupled and
very long-lived. Astrophysical and cosmological bounds on invisible axions are
also briefly touched upon.Comment: 14 pages, to appear in the Lecture Notes in Physics volume on Axions,
(Springer Verlag
- …