57 research outputs found
Photovoltaic technologies
Photovoltaics is already a billion dollar industry. It is experiencing rapid growth as concerns over fuel supplies and carbon emissions mean that governments and individuals are increasingly prepared to ignore its current high costs. It will become truly mainstream when its costs are comparable to other energy sources. At the moment, it is around four times too expensive for competitive commercial production. Three generations of photovoltaics have been envisaged that will take solar power into the mainstream. Currently, photovoltaic production is 90% first-generation and is based on silicon wafers. These devices are reliable and durable, but half of the cost is the silicon wafer and efficiencies are limited to around 20%. A second generation of solar cells would use cheap semiconductor thin films deposited on low-cost substrates to produce devices of slightly lower efficiency. A number of thin-film device technologies account for around 5–6% of the current market. As second-generation technology reduces the cost of active material, the substrate will eventually be the cost limit and higher efficiency will be needed to maintain the cost-reduction trend. Third-generation devices will use new technologies to produce high-efficiency devices. Advances in nanotechnology, photonics, optical metamaterials, plasmonics and semiconducting polymer sciences offer the prospect of cost-competitive photovoltaics. It is reasonable to expect that cost reductions, a move to second-generation technologies and the implementation of new technologies and third-generation concepts can lead to fully cost- competitive solar energy in 10–15 years
Cash Use in Australia: New Survey Evidence
The Reserve Bank has completed its second study of consumers' use of payment instruments. The study indicates that cash remains the most common form of payment by consumers. It is used extensively in situations where average payment values are low and where quick transaction times are preferred. Nonetheless, cash use as a share of total payments has declined, falling as a share of both the number and value of payments. Two important factors contributing to this decline are the substitution of cards for cash use, particularly for low-value payments, and the increasing adoption of online payments.withdrawals; payments; payments survey; transaction diary; payments use study; payments system; contactless payments; online payments
Helium ion microscopy and energy selective scanning electron microscopy – two advanced microscopy techniques with complementary applications
Both scanning electron microscopes (SEM) and helium ion microscopes (HeIM) are based on the same principle of a charged particle beam scanning across the surface and generating secondary electrons (SEs) to form images. However, there is a pronounced difference in the energy spectra of the emitted secondary electrons emitted as result of electron or helium ion impact. We have previously presented evidence that this also translates to differences in the information depth through the analysis of dopant contrast in doped silicon structures in both SEM and HeIM. Here, it is now shown how secondary electron emission spectra (SES) and their relation to depth of origin of SE can be experimentally exploited through the use of energy filtering (EF) in low voltage SEM (LV-SEM) to access bulk information from surfaces covered by damage or contamination layers. From the current understanding of the SES in HeIM it is not expected that EF will be as effective in HeIM but an alternative that can be used for some materials to access bulk information is presented
Suppression of backscattered diffraction from sub-wavelength ‘moth-eye’ arrays
The eyes and wings of some species of moth are covered with arrays of nanoscale features that dramatically reduce reflection of light. There have been multiple examples where this approach has been adapted for use in antireflection and antiglare technologies with the fabrication of artificial moth-eye surfaces. In this work, the suppression of iridescence caused by the diffraction of light from such artificial regular moth-eye arrays at high angles of incidence is achieved with the use of a new tiled domain design, inspired by the arrangement of features on natural moth-eye surfaces. This bio-mimetic pillar architecture contains high optical rotational symmetry and can achieve high levels of diffraction order power reduction. For example, a tiled design fabricated in silicon and consisting of domains with 9 different orientations of the traditional hexagonal array exhibited a ~96% reduction in the intensity of the ?1 diffraction order. It is suggested natural moth-eye surfaces have evolved a tiled domain structure as it confers efficient antireflection whilst avoiding problems with high angle diffraction. This combination of antireflection and stealth properties increases chances of survival by reducing the risk of the insect being spotted by a predator. Furthermore, the tiled domain design could lead to more effective artificial moth-eye arrays for antiglare and stealth applications
A three-dimensional electrostatic actuator with a locking mechanism for a new generation of atom chips
A micromachined three-dimensional electrostatic actuator that is optimized for aligning and tuning optical microcavities on atom chips is presented. The design of the 3D actuator is outlined in detail, and its characteristics are verified by analytical calculations and finite element modelling. Furthermore, the fabrication process of the actuation device is described and preliminary fabrication results are shown. The actuation in the chip plane which is used for mirror positioning has a working envelope of 17.5 ?m. The design incorporates a unique locking mechanism which allows the out-of-plane actuation that is used for cavity tuning to be carried out once the in-plane actuation is completed. A maximum translation of 7 ?m can be achieved in the out-of-plane direction
Epitaxial Interdigitated Back Contact (IBC) solar cell test platform for novel light trapping schemes
An Interdigitated Back Contact (IBC) solar cell is being developed for evaluation of emerging light trapping schemes of silicon nanowire arrays on pyramidal textured surfaces. The front surface of the baseline IBC cell design was optimized with a thin film coating considering both antireflection and passivation to reduce surface recombination. Addition of a front surface field (FSF) was shown to improve the surface passivation of the cell. PC2D simulations of the baseline device predict an efficiency of 17.4%. Silicon nanowire arrays and hybrid structures of silicon nanowires on pyramids were successfully fabricated. Hemispherical reflectance measurements show that a weighted average reflectance of just 1.89% was achieved. With adequate surface passivation, these highly-effective antireflective structures could result in a power conversion efficiency increase compared to traditional light trapping methods when incorporated into the IBC cell
Junction formation with HWCVD and TCAD model of an epitaxial back-contact solar cell
In this paper, we present morphological and electrical characteristics of a junction formed of Si p-type films deposited on an n-type silicon wafer using a hot wire chemical vapor deposition (HWCVD) tool. We describe the fabrication process and study the influence of diborane flow and postprocess annealing in improving junction characteristics. Our morphological studies undertaken using atomic force microscopy show that the initial deposition suffered from voids rather than being a uniform film; however, this improves significantly under our annealing treatment. The improvement in morphology was observed in the electrical characteristics, with estimated Voc doubling and rectification of the junction improving by several orders of magnitude. Fitting of the current-voltage curves to a two-diode model showed that increasing the diborane flow in the process helps reduce the saturation current and ideality factors, while increasing the shunt resistance. Electrochemical capacitance-voltage (ECV) and quasi-steady-state photoconductance measurements are used to characterize the deposited films further. A solar cell device with a silicon epitaxy emitter is modeled using industry-standard 3-D modeling tools and input parameters from experimental data, and the impact of defects is studied. A potential efficiency approaching 25% is shown to be feasible for an optimized device
The Optimized-String Dynamic Photovoltaic Array
This paper presents a novel system for producing the optimum power output from photovoltaic (PV) arrays using dynamic cell reconfiguration. The proposed approach is the first in the literature that creates strings using individual substrings that have been characterized and categorized ensuring maximum power extraction for a given irradiance profile. This optimized and decentralized PV architecture can produce significantly more power than a static equivalent (by an average of 22.6%) and also outperforms the sophisticated alternative known as an irradiance equalized dynamic photovoltaic array (IEq-DPVA) by an average of 13.7% for the relevant tests carried out. This paper identifies the hardware requirements to produce such a system and it describes an algorithm that performs the optimized-string reconfiguration strategy. Finally, a simulator programmed in MATLAB is used to compare the performance of the optimized-string DPVA against an IEq-DPVA in a series of flexibility tests
Proximity effect quantification and dose optimisation for high resolution helium ion beam lithography
Co-producing knowledge in health and social care research: Reflections on the challenges and ways to enable more equal relationships
Researchers are increasingly encouraged to co-produce research, involving members of the public, service users, policy makers and practitioners in more equal relationships throughout a research project. The sharing of power is often highlighted as a key principle when co-producing research. However, health and social care research, as with many other academic disciplines, is carried out within embedded hierarchies and structural inequalities in universities, public service institutions, and research funding systems—as well as in society more broadly. This poses significant challenges to ambitions for co-production. This article explores the difficulties that are faced when trying to put ideal co-production principles into practice. A reflective account is provided of an interdisciplinary project that aimed to better understand how to reduce power differentials within co-produced research. The project facilitated five workshops, involving researchers from different disciplines, health, social care and community development staff and public contributors, who all had experience in co-production within research. In the workshops, people discussed how they had attempted to enable more equal relationships and shared ideas that supported more effective and equitable co-produced research. Shared interdisciplinary learning helped the project team to iteratively develop a training course, a map of resources and reflective questions to support co-produced research. The gap between co-production principles and practice is challenging. The article examines the constraints that exist when trying to share power, informed by multidisciplinary theories of power. To bring co-production principles into practice, changes are needed within research practices, cultures and structures; in understandings of what knowledge is and how different forms of knowledge are valued. The article outlines challenges and tensions when co-producing research and describes potential ideas and resources that may help to put co-production principles into practice. We highlight that trying to maintain all principles of co-production within the real-world of structural inequalities and uneven distribution of resources is a constant challenge, often remaining for now in the realm of aspiration
- …