230 research outputs found
Skin permeation mechanism and bioavailability enhancement of celecoxib from transdermally applied nanoemulsion
<p>Abstract</p> <p>Background</p> <p>Celecoxib, a selective cyclo-oxygenase-2 inhibitor has been recommended orally for the treatment of arthritis and osteoarthritis. Long term oral administration of celecoxib produces serious gastrointestinal side effects. It is a highly lipophilic, poorly soluble drug with oral bioavailability of around 40% (Capsule). Therefore the aim of the present investigation was to assess the skin permeation mechanism and bioavailability of celecoxib by transdermally applied nanoemulsion formulation. Optimized oil-in-water nanoemulsion of celecoxib was prepared by the aqueous phase titration method. Skin permeation mechanism of celecoxib from nanoemulsion was evaluated by FTIR spectral analysis, DSC thermogram, activation energy measurement and histopathological examination. The optimized nanoemulsion was subjected to pharmacokinetic (bioavailability) studies on Wistar male rats.</p> <p>Results</p> <p>FTIR spectra and DSC thermogram of skin treated with nanoemulsion indicated that permeation occurred due to the disruption of lipid bilayers by nanoemulsion. The significant decrease in activation energy (2.373 kcal/mol) for celecoxib permeation across rat skin indicated that the stratum corneum lipid bilayers were significantly disrupted (p < 0.05). Photomicrograph of skin sample showed the disruption of lipid bilayers as distinct voids and empty spaces were visible in the epidermal region. The absorption of celecoxib through transdermally applied nanoemulsion and nanoemulsion gel resulted in 3.30 and 2.97 fold increase in bioavailability as compared to oral capsule formulation.</p> <p>Conclusion</p> <p>Results of skin permeation mechanism and pharmacokinetic studies indicated that the nanoemulsions can be successfully used as potential vehicles for enhancement of skin permeation and bioavailability of poorly soluble drugs.</p
Mechanistic approach for the development of ultrafine oil-water emulsions using monoglyceride and blends of medium and long chain triglycerides: enhancement of the solubility and bioavailability of Perphenazine
A kinetically stable ultra-fine oil-water (o/w) emulsion containing Perphenazine and blends of long and medium chain triglycerides was prepared. The purpose of the ultra-fine emulsion was to increase the oral bioavailability of Perphenazine. The formulations were prepared using a low energy emulsification phase titration method. The optimized formulations consisted of blends of linseed oil and Sefsol 218 (1:1) (oil phase), polysorbate 40 (surfactant), polyethylene glycol 400 (cosurfactant) and distilled water (dispersion medium). Characterization of viscosity, refractive index, particle size distribution, spectral transmittance and surface morphology of the formulations was performed. The release rate of Perphenazine from the formulations was quantified using the everted gut sac of rat intestinal mucosa. The ex vivo release data demonstrated that the formulated nanoemulsions increased significantly the permeation rate of Perphenazine when compared with a suspension. Following oral administration of selected nanoemulsions in Wistar rats, the AUC and Cmax of Perphenazine increased by 2.9 and 2.54-fold respectively compared with the Perphenazine suspension. The observed increase in bioavailability may be due to the increase in the dissolution rate from the molecularly dissolved drug in the oil phase and an increased rate of dispersion of the drug in the gastrointestinal (GI) tract which leads to greater absorption into the blood
Dvopulsni sustav za isporuku amoksicilina: Pokušaj sprečavanja bakterijske rezistencije na antibiotike
Bearing in mind the present scenario of the increasing biological tolerance of bacteria against antibiotics, a time controlled two pulse dosage form of amoxicillin was developed. The compression coating inlay tablet approach was used to deliver the drug in two pulses to different parts of the GIT after a well defined lag time between the two releases. This was made possible by formulating a core containing one of the two drug fractions (intended to be delivered as the second pulse), which was spray coated with a suspension of ethyl cellulose and a hydrophilic but water insoluble agent as a pore former (microcrystalline cellulose). Coating of 1 up to 5 % (m/m) was applied over the core tablet, giving a corresponding lag of 3, 5, 7 and 12 h. Increasing the level of coating led to retardation of the water uptake capacity of the core, leading to prolongation of the lag time. Microcrystalline cellulose was used as a hydrophilic but water insoluble porosity modifier in the barrier layer, varying the concentration of which had a significant effect on shortening or prolongation of the lag time. This coated system was further partially compression coated with the remaining drug fraction (to be released as the first immediate release pulse) with a disintegrant, giving a final tablet. The core tablet and the final two pulse inlay tablet were further investigated for the in vitro performance.Zbog sve učestalije pojave rezistencije bakterija na antibiotike, razvijen je dvopulsni sustav s vremenskom kontrolom za isporuku amoksicilina. Sustav čine slojevite tablete s obloženim slojem dobivenim metodom kompresije, koji omogućavaju isporuku lijeka u dva pulsa u različite dijelove gastrointestinalnog trakta, s utvrđenom odgodom između dva oslobađanja. Ovakav način oslobađanja postignut je s pripravkom koji u jezgri tablete sadrži jednu frakciju lijeka (koja se oslobađa kao drugi puls), a u oblozi drugu. Obloženi dio dobiven je sprejanjem sa suspenzijom etilceluloze i hidrofilnog, ali vodonetopljivog sredstva koji tvori pore (mikrokristalinična celuloza). Oblaganje sa slojem koji čini 1 do 5 % (m/m) mase jezgre postignut je vremenski odmak drugog pulsa od 3, 5, 7 i 12 h. Povećanjem mase obložnog sloja smanjuje se kapacitet prodiranja vode u jezgru tablete, što produljuje vrijeme drugog pulsa. Mikrokristalinična celuloza uporijebljena je kao hidrofilno, vodonetopljivo sredstvo za kotrolu poroznosti u barijernom sloju. Promjena koncentracije celuloze značajno je utjecala na skraćenje ili produljenje vremenskog odmaka. Obloženi sustav je potom djelomično obložen s preostalom frakcijom lijeka (koja se oslobađa odmah u prvom pulsu) pomiješanom s dezintegratorom. Tableta s jezgrom i dvopulsna slojevita tableta ispitivane su in vitro
Stability indicating method development and validation for simultaneous estimation of atorvastatin calcium and celecoxib in bulk and niosomal formulation by RP-HPLC
The present work describes development and validation of a specific, sensitive, precise and stability-indicating high-performance liquid chromatographic method of analysis of atorvastatin calcium and celecoxib, both as a bulk drug and in niosomal formulation. The analysis has been performed by using Cosmosil-C18 column (4.6 mm´250 mm, 5 m) at 25 °C using acetonitrile: ammonium acetate buffer pH 5.0: methanol (50:25:25 v/v/v) as mobile phase. The detection was carried out at 277nm with a flow rate of 1.0mL/min. The retention times of Atorvastatin calcium and Celecoxib were 6.195 and 3.989min, respectively. The method was validated according to ICH guidelines, for specificity, precision, linearity, accuracy and robustness. Atorvastatin calcium and Celecoxib were subjected to stress conditions of hydrolysis, oxidation, photolysis and thermal degradation. The degradation was observed in oxidation and acid hydrolysis. The linearity for atorvastatin calcium and celecoxib were in the range of 100-500 µg/mL. The recovery study of atorvastatin and celecoxib were found to be in the range of 98.96 - 99.92% and 98.90-100%, respectively. The proposed method was validated and successfully applied to the estimation of Atorvastatin calcium and Celecoxib in combined in-house niosomal formulation.O presente trabalho descreve o desenvolvimento e a validação de método de análise por cromatografia de alta eficiência específico, sensível, preciso e indicador de estabilidade de atorvastatina cálcica e celecoxibe, ambos como fármaco e como formulação niosômica. A análise foi realizada utilizando coluna Cosmosil-C18 (4,6 mm´250 mm, 5 m) a 25 °C, e acetonitrila: tampão acetato de amônio pH 5,0: metanol (50:25:25 v/v/v) como fase móvel. A detecção foi realizada a 277 nm, com fluxo de 1,0 mL/min. Os tempos de retenção de atorvastatina cálcica e de celecoxibe foram 6,195 e 3,989 min, respectivamente. O método foi validado de acordo com as regras da ICH para especificidade, precisão, exatidão e robustez. A atorvastatina cálcica e o celecoxibe foram submetidos a condições de estresse por hidrólise, oxidação, fotólise e degradação térmica. A degradação foi observada por oxidação e hidrólise ácida. Observou-se a linearidade da atorvastatina cálcica e do celecoxibe na faixa de 100-500 µg/mL. A recuperação da atorvastatina e do celecoxibe foi observada na faixa de 98,96-99,92% e 98,90-100%, respectivamente. O método proposto foi validado e aplicado com sucesso para a determinação de atorvastatina cálcica e celecoxibe em formulação niosômica caseira combinada
Formulation and evaluation of mucoadhesive buccal patch of acyclovir utilizing inclusion phenomenon
Stability indicating method development and validation for simultaneous estimation of atorvastatin calcium and celecoxib in bulk and niosomal formulation by RP-HPLC
Dizajn, razvoj i vrednovanje novih nanoemulzija za transdermalnu primjenu celekoksiba
The aim of the present study was to investigate the potential of nanoemulsion formulations for transdermal delivery of celecoxib (CXB). The in vitro skin permeation profile of optimized formulations was compared with CXB gel and nanoemulsion gel. Significant increase in the steady state flux (Jss), permeability coefficient (Kp) and enhancement ratio (Er) was observed in nanoemulsion formulations T1 and T2 (p < 0.05). The highest value of these permeability parameters was obtained in formulation T2, which consisted of 2% m/m of CXB, 10% m/m of oil phase (Sefsol 218 and Triacetin), 50% m/m of surfactant mixture (Tween-80 and Transcutol-P) and 40% m/m of water. The anti-inflammatory effects of formulation T2 showed a significant increase (p < 0.05) in inhibition after 24 h compared to CXB gel and nanoemulsion gel on carrageenean-induced paw edema in rats. These results suggested that nanoemulsions are potential vehicles for improved transdermal delivery of CXB.U radu su opisana ispitivanja nanoemulzija za transdermalnu primjenu celekoksiba (CXB). Profil permeacije kroz kožu ispitivan je in vitro i uspoređivan sa CXB gelom i nanoemulzijskim gelom. U formulacijama T1 i T2 postignuto je značajno povećanje ustaljenog fluksa (Jss), koeficijenta permeabilnosti (Kp) i povećanje omjera (Er) (p < 0.05). Najveće vrijednosti parametara permeabilnosti dobivene su u formulaciji T2 koja je sadržala 2% m/m CXB, 10% m/m uljne faze (Sefsol 218 i Triacetin), 50% m/m površinski-aktivnih tvari (Tween-80 i Transcutol-P) i 40% m/m vode. Protuupalno djelovanje formulacije T2 na edem šape štakora uzrokovan karageninom značajno je povećano (p < 0.05) poslije 24 h u usporedbi sa CXB gelom i nanoemulzijskim gelom. Rezultati ukazuju na poboljšanu isporuku celekoksiba putem nanoemulzija
Čvrste disperzije silimarina: Karakterizacija i utjecaj načina priprave na oslobađanje
The influence of preparation methodology of silymarin solid dispersions using a hydrophilic polymer on the dissolution performance of silymarin was investigated. Silymarin solid dispersions were prepared using HPMC E 15LV by kneading, spray drying and co-precipitation methods and characterized by FTIR, DSC, XRPD and SEM. Dissolution profiles were compared by statistical and model independent methods. The FTIR and DSC studies revealed weak hydrogen bond formation between the drug and polymer, while XRPD and SEM confirmed the amorphous nature of the drug in co-precipitated solid dispersion. Enhanced dissolution compared to pure drug was found in the following order: co-precipitation > spray drying > kneading methodology (p sušenje sprejom > metoda gnječenja (p < 0.05). Iz svih pripravaka oslobađanje je bilo sporije, bez obzira na metodu priprave. Pripravci dobiveni metodom koprecipitacije bili su stabilni, a oslobađanje silimarina iz njih bilo je 2,5 bolje u odnosu na čisti lijek
Antidiabetic activity of the ethyl acetate fraction of Ficus lutea (Moraceae) leaf extract: comparison of an in vitro assay with an in vivo obese mouse model
- …