32,430 research outputs found
Coupling for linear shaped charge Patent
Coupling device for linear shaped charge for space vehicle abort syste
New structural approach for determining load carrying capability of filament wound composite materials
Metal lined boron and graphite composites exhibit high strength and minimum weight, making them superior to aluminum cylindrical shell structures and to steel or aluminum constructed pressure vessels. S glass filament-epoxy resin matrix with aluminum liner is suitable for cryogenic tanks
Low temperature catalytic ignition of hydrogen and oxygen
Catalyst composed of 32 percent iridium metal supported on granular alumina is most active and most stable of platinum metal catalysts. Catalyst consistently induces reactions at temperatures as low as 78 K
Three-dimensional modelling on the hydrodynamics of a circulating fluidised bed
The rapid depletion of oil and the environmentalimpact of combustion has motivated the search for cleancombustion technologies. Fluidised bed combustion (FBC)technology works by suspending a fuel over a fast air inletwhilst sustaining the required temperatures. Using biomassor a mixture of coal/biomass as the fuel, FBC provides alow-carbon combustion technology whilst operating at lowtemperatures. Understanding the hydrodynamic processes influidised beds is essential as the flow behaviours causing heatdistributions and mixing determine the combustion processes.The inlet velocities and different particle sizes influence theflow behaviour significantly, particularly on the transitionfrom bubbling to fast fluidising regimes. Computationalmodelling has shown great advancement in its predictive capabilityand reliability over recent years. Whilst 3D modellingis preferred over 2D modelling, the majority of studies use2D models for multiphase models due to computational costconsideration. In this paper, two-fluid modelling (TFM) isused to model a 3D circulating fluidised bed (CFB) initiallyfocussing on fluid catalytic cracker (FCC) particles. Thetransition from bubbling to fast fluidisation over a rangeof velocities is explored, whilst the effects on the bubblediameter, particle distributions and bed expansion for differentparticle properties including particle sizes are compared. Dragmodels are also compared to study the effects of particleclustering at the meso-scale
Bearing optimization for SSME HPOTP application
The space shuttle main engine (SSME) high-pressure oxygen turbopumps (HPOTP) have not experienced the service life required of them. To improve the life of the existing turbopump bearings, modifications to the bearings that could be retrofitted into the present bearing cavity are being investigated. Several bearing parameters were optimized using the computer program SHABERTH, which performs a thermomechanical simulation of a load support system. The computer analysis showed that improved bearing performance is feasible if low friction coefficients can be attained. Bearing geometries were optimized considering heat generation, equilibrium temperatures, and relative life. Two sets of curvatures were selected from the optimization: an inner-raceway curvature of 0.54, an outer-raceway curvature of 0.52, and an inner-raceway curvature of 0.55, an outer-raceway curvature of 0.53. A contact angle of 16 deg was also selected. Thermal gradients through the bearings were found to be lower with liquid lubrication than with solid film lubrication. As the coolant flowrate through the bearing increased, the ball temperature decreased but at a continuously decreasing rate. The optimum flowrate was approximately 4 kg/s. The analytical modeling used to determine these feasible modifications to improve bearing performance is described
Three dimensional thrust chamber life prediction
A study was performed to analytically determine the cyclic thermomechanical behavior and fatigue life of three configurations of a Plug Nozzle Thrust Chamber. This thrust chamber is a test model which represents the current trend in nozzle design calling for high performance coupled with weight and volume limitations as well as extended life for reusability. The study involved the use of different materials and material combinations to evaluate their application to the problem of low-cycle fatigue in the thrust chamber. The thermal and structural analyses were carried out on a three-dimensional basis. Results are presented which show plots of continuous temperature histories and temperature distributions at selected times during the operating cycle of the thrust chamber. Computed structural data show critical regions for low-cycle fatigue and the histories of strain within the regions for each operation cycle
Detailed studies of aviation fuel flowability
Six Jet A fuels, with varying compositions, were tested for low temperature flowability in a 190-liter simulator tank that modeled a section of a wing tank of a wide-body commercial airplane. The insulated tank was chilled by circulating coolant through the upper and lower surfaces. Flow-ability was determined as a function of fuel temperature by holdup, the fraction of unflowable fuel remaining in the tank after otherwise complete withdrawal. In static tests with subfreezing tank conditions, hold up varied with temperature and fuel composition. However, a general correlation of two or three classes of fuel type was obtained by plotting holdup as a function of the difference between freezing point and boundary-layer temperature, measured 0.6 cm above the bottom tank surface. Dynamic conditions of vibrations and slosh or rate of fuel withdrawal had very minor effects on holdup. Tests with cooling schedules to represent extreme, cold-day flights showed, at most, slight holdup for any combination of fuel type or dynamic conditions. Tests that superimposed external fuel heating and recirculation during the cooldown period indicates reduced hold up by modification of the low-temperature boundary layer. Fuel heating was just as effective when initiated during the later times of the tests as when applied continuously
Status and plans of NASA's Materials Science and Manufacturing in Space (MS/MS) program
A description is given of a research and development program on the space shuttle mission designed to prepare the way for possible commercial manufacturing operations on permanently orbiting space stations
Calculation of the radiation hazard at supersonic aircraft altitudes produced by an energetic solar flare, 2
Radiation hazard calculations for supersonic aircraft altitudes produced by energetic solar flare of 23 Feb. 196
- …