143 research outputs found
Chalcogenide suspended-core fibers for supercontinuum generation in the mid-infrared
Chalcogenide suspended core fibers are a valuable solution to obtain supercontinuum generation of light in the mid-infrared, thanks to glass high transparency, high index contrast, small core diameter and widely-tunable dispersion. In this work the dispersion and nonlinear properties of several chalcogenide suspended core mi-crostructured fibers are numerically evaluated, and the effects of all the structural parameters are investigated. Optimization of the design is carried out to provide a fiber suitable for wide-band supercontinuum generation in the mid-infrared
Highly nonlinear chalcogenide suspended-core fibers for applications in the mid-infrared
Due to their unique dispersion and nonlinear properties, chalcogenide suspended-core fibers, characterized by a few micrometer-sized core suspended between large air-holes by few small glaĂź struts, are excellent candidates for mid-infrared applications. In the present study the influence of the main croĂź-section characteristics of the chalcogenide suspended-core fibers on the dispersion curve and on the position of the zero-dispersion wavelength has been thoroughly analyzed with a full-vector modal solver based on the finite element. In particular, the design of suspended-core fibers made of both As2S3 and As2Se3 has been optimized to obtain dispersion properties suitable for the supercontinuum generation in the mid-infrared
Thermo-optical numerical modal analysis of multicore fibers for high power lasers and amplifiers
Lasers for modern industrial and research applications are required to provide a high average beam power and at the same time be reliable, efficient, and compact. Rare-earth doped single-mode fiber lasers are the most promising solution. Large mode area fibers are effectively used to reduce nonlinear effects and scaling up the beam power which is now bounded by thermal effects. A new cutting-edge approach to the issue involves the use of Multi-Core Fibers (MCFs), coherently combining several lower power beams into a higher power one, and thus pushing the threshold of nonlinearities and transverse mode instabilities to higher power. The amplification process involves heat generation in the doped cores due to quantum defect, which propagates radially and creates a temperature gradient across the fiber cross-section. Even though the cores are optically uncoupled, the refractive index gradient due to thermo-optical effects could cause cross-talk and core mode coupling. In this work, we numerically analyze the performances of 9-core MCFs for high power fiber lasers by taking into account the coupling and bending effects due to the heat load generated by the quantum defect between pump and laser radiation. MCFs show very low sensitivity to heat load and bending, with effectively single-mode behaviour up to 15 um core diameter (effective area 181 um2) and down to 35 um pitch
Hollow-Core Fiber-Based Biosensor: A Platform for Lab-in-Fiber Optical Biosensors for DNA Detection
In this paper, a novel platform for lab-in-fiber-based biosensors is studied. Hollow-core tube lattice fibers (HC-TLFs) are proposed as a label-free biosensor for the detection of DNA molecules. The particular light-guiding mechanism makes them a highly sensitive tool. Their transmission spectrum is featured by alternations of high and low transmittance at wavelength regions whose values depend on the thickness of the microstructured web composing the cladding around the hollow core. In order to achieve DNA detection by using these fibers, an internal chemical functionalization process of the fiber has been performed in five steps in order to link specific peptide nucleic acid (PNA) probes, then the functionalized fiber was used for a three-step assay. When a solution containing a particular DNA sequence is made to flow through the HC of the TLF in an 'optofluidic' format, a bio-layer is formed on the cladding surfaces causing a red-shift of the fiber transmission spectrum. By comparing the fiber transmission spectra before and after the flowing it is possible to identify the eventual formation of the layer and, therefore, the presence or not of a particular DNA sequence in the solution
Toward the development of direct emission yellow fiber lasers for biomedical applications
The paper presents the design and preliminary experimental validation of a fiber laser with direct emission in the yellow. The active material is a Dy-doped custom-made phosphate fiber, which is pumped by high-power blue diode lasers emitting at 450 nm. A suitable model has been developed to optimize the laser behavior and validated with a low-power version of the laser cavity with femtosecond written Bragg grating mirrors
Analysis of the modal content into large-mode-area photonic crystal fibers under heat load
International audienceThanks to their capability to provide very large mode area together with effective suppression of high-order modes, while allowing strong pump absorption and efficient conversion, Yb-doped double-cladding photonic crystal fibers are one of the key enabling factors for the development of high power fiber lasers. Thermal effects are currently appointed as the main bottleneck for future power scaling since, beyond a certain average power, they allow guidance of high order modes and energy transfer to them, causing a sudden degradation of the beam quality. In this paper the effects of heat load on the modes of double cladding fibers are thoroughly analyzed with a full-vector modal solver based on the finite-element method with integrated steady-state heat equation solver. Fibers with different inner cladding designs are compared to provide a deeper understanding of the mechanisms beyond the mode reconfinement and coupling. The influence of the fiber design on the robustness of the single-mode regime with respect to fiber heating has been demonstrated, providing a clear picture of the complex interaction between modes. On the basis of simulation results it has been possible to group fiber modes into three families characterized by peculiar reaction to heating. Index Terms—Photonic crystal fibers, thermo-optic effect, fiber lasers and amplifiers
Large mode area aperiodic fiber designs for robust singlemode emission under high thermal load
International audienceIn this paper, we investigate the potential of various large mode area bers under thermal load, that is the state-of-the-art air-silica large pitch bers, as well as the recently devised symmetry-reduced photonic crystal ber and aperiodic all-solid by carefully considering the degrees of freedom oered all along the ber fabrication. This work aims to discuss the mode ltering ability of these structures in regard to the power scaling and to conrm their potential for robust singlemode operation at high power level. Structural principles contributing to improve their performances such as the impact of air holes / solid inclusions size will be presented. We also intend to establish that the range of average absorbed/output power for which a robust singlemode operation is available can be shifted to full user requests in term of power range
Analysis and design of photonic crystal fibers: Solid and hollow core fibers through the finite element method
- …