4,396 research outputs found
Analyticity and the counting rule of matrix poles
By studying scattering amplitudes in the large limit, we
clarify the dependence of the matrix pole position. It is
demonstrated that analyticity and the counting rule exclude the existence
of matrix poles with . Especially the properties
of and with respect to the expansion are discussed.
We point out that in general tetra-quark resonances do not exist.Comment: This paper replaces hep-ph/0412175. The latter is withdraw
Analysis of laser absorption on a rough metal surface
We have developed a simple model to estimate the cumulative absorption coefficient of an ultraviolet laser pulse impinging on a pure metal, including the effects of surface roughness whose scale is much larger than the laser wavelength λ. The multiple reflections from the rough surface may increase the absorption coefficient over a pristine, flat surface by an order of magnitude. Thus, as much as 16% (at room temperature) of the power of a 248 nm KrF excimer laser pulse may be absorbed by an aluminum target. A comparison with experimental data is given. © 1997 American Institute of Physics.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/71289/2/APPLAB-70-6-696-1.pd
CAutoCSD-evolutionary search and optimisation enabled computer automated control system design
This paper attempts to set a unified scene for various linear time-invariant (LTI) control system design schemes, by transforming the existing concept of 'Computer-Aided Control System Design' (CACSD) to the novel 'Computer-Automated Control System Design' (CAutoCSD). The first step towards this goal is to accommodate, under practical constraints, various design objectives that are desirable in both time and frequency-domains. Such performance-prioritised unification is aimed to relieve practising engineers from having to select a particular control scheme and from sacrificing certain performance goals resulting from pre-committing to the adopted scheme. With the recent progress in evolutionary computing based extra-numeric, multi-criterion search and optimisation techniques, such unification of LTI control schemes becomes feasible, analytically and practically, and the resultant designs can be creative. The techniques developed are applied to, and illustrated by, three design problems. The unified approach automatically provides an integrator for zero-steady state error in velocity control of a DC motor, meets multiple objectives in designing an LTI controller for a non-minimum phase plant and offers a high-performing LTI controller network for a nonlinear chemical process
A hybrid systematic narrative review of instruments measuring home-based care nurses\u27 competency
Aim: The aim of the study was to identify and synthesize the contents and the psychometric properties of the existing instruments measuring home-based care (HBC) nurses\u27 competencies. Design: A hybrid systematic narrative review was performed. Review Methods: The eligible studies were reviewed to identify the competencies measured by the instruments for HBC nurses. The psychometric properties of instruments in development and psychometric testing design studies were also examined. The methodological quality of the studies was evaluated using the Medical Education Research Study Quality Instrument and COSMIN checklist accordingly. Data Sources: Relevant studies were searched on CINAHL, MEDLINE (via PubMed), EMBASE, PsychINFO and Scopus from 2000 to 2022. The search was limited to full-text items in the English language. Results: A total of 23 studies reporting 24 instruments were included. 12 instruments were adopted or modified by the studies while the other 12 were developed and psychometrically tested by the studies. None of the instruments encompassed all of the 10 home-based nursing care competencies identified in an earlier study. The two most frequently measured competencies were the management of health conditions, and critical thinking and problem-solving skills, while the two least measured competencies were quality and safety, and technological literacy. The content and structural validity of most instruments were inadequate since the adopted instruments were not initially designed or tested among HBC nurses. Conclusion: This review provides a consolidation of existing instruments that were used to assess HBC nurses\u27 competencies. The instruments were generally not comprehensive, and the content and structural validity were limited. Nonetheless, the domains, items and approaches to instrument development could be adopted to develop and test a comprehensive competency instrument for home-based nursing care practice in the future. Impact: This review consolidated instruments used to measure home-based care nurses\u27 competency. The instruments were often designed for ward-based care nurses hence a comprehensive and validated home-based nursing care competency instrument is needed. Nurses, researchers and nursing leaders could consider the competency instruments identified in this review to measure nurses\u27 competencies, while a home-based nursing care competency scale is being developed. Patient or Public Contribution: No patient or public contribution was required in this review
Combined Effect of Latex and Crumb Rubber on Mechanical Properties of Concrete for Railway Application
Crumb rubber incorporation is widely deemed to deteriorate the compressive strength of concrete. One of the dominant reasons for this strength reduction is known as the inferior bonding or weak interfacial transition zones (ITZ) between the crumb rubber and hardened cement paste. While Styrene-butadiene (SBR) latex is being used as a bonding agent in concrete manufacturing, the SBR latex usage holds the potential to compensate for the strength reduction from crumb rubber incorporation. This study focuses on evaluating the sole and combined effect of crumb rubber and SBR latex on the compressive strength, one optimum combination of latex modified rubberised mix (LMCRC) that had achieved 55.5 MPa of 28 days characteristic strength was chosen to compare its impact resistance and stress-strain response to a plain concrete (PC) with similar characteristic strength. Experimental results showed both crumb rubber and SBR latex incorporation induced a compressive strength reduction in the concrete. The optimum latex modified rubberised mix with w/c of 0.32, crumb rubber replacement of 20kg/m3, and 3% latex additives had outperformed the control mix with w/c ratio of 0.38 by 66.7% and 293% in the 400mm span impact test and 200mm span impact test, respectively. Besides, the latex modified rubberised mix showed higher Poisson’s ratio, and higher compressive strain which indicates more ductile behaviour as compared to the plain concrete
Combined Effect of Latex and Crumb Rubber on Mechanical Properties of Concrete for Railway Application
Crumb rubber incorporation is widely deemed to deteriorate the compressive strength of concrete. One of the dominant reasons for this strength reduction is known as the inferior bonding or weak interfacial transition zones (ITZ) between the crumb rubber and hardened cement paste. While Styrene-butadiene (SBR) latex is being used as a bonding agent in concrete manufacturing, the SBR latex usage holds the potential to compensate for the strength reduction from crumb rubber incorporation. This study focuses on evaluating the sole and combined effect of crumb rubber and SBR latex on the compressive strength, one optimum combination of latex modified rubberised mix (LMCRC) that had achieved 55.5 MPa of 28 days characteristic strength was chosen to compare its impact resistance and stress-strain response to a plain concrete (PC) with similar characteristic strength. Experimental results showed both crumb rubber and SBR latex incorporation induced a compressive strength reduction in the concrete. The optimum latex modified rubberised mix with w/c of 0.32, crumb rubber replacement of 20kg/m3, and 3% latex additives had outperformed the control mix with w/c ratio of 0.38 by 66.7% and 293% in the 400mm span impact test and 200mm span impact test, respectively. Besides, the latex modified rubberised mix showed higher Poisson’s ratio, and higher compressive strain which indicates more ductile behaviour as compared to the plain concrete
Long-term effectiveness of a digital therapeutic intervention for smoking cessation: a randomized controlled trial
Introduction: The present study evaluated the long-term effectiveness of Quit Genius (QG), an extended digital smoking cessation intervention. Methods: Participants were adult smokers (N=556) recruited between January and November of 2019 via social media and referrals from primary care practices who were given nicotine replacement therapy and randomly assigned to Quit Genius (QG) (n=277), a cognitive behavioral therapy (CBT) based digital intervention or Very Brief Advice (VBA) (n=279), a face-to-face control intervention. Primary analyses (N=530), by intention-to-treat, compared QG and VBA on biochemically verified continuous 7-day abstinence at 4, 26, and 52 weeks post-quit date. Secondary outcomes included sustained abstinence, quit attempts, self-efficacy and mental well-being. Results: Seven-day point prevalence abstinence from weeks 4 through 52 ranged from 27% to nearly 45% among those who received QG, and from 13% to 29% for those in VBA. Continuous 7-day abstinence at 26 and 52 weeks occurred in 27.2% and 22.6% of QG participants, respectively, relative to 16.6% and 13.2% of VBA participants; QG participants were more likely to remain abstinent than those in VBA (Relative Risk [RR]= 1.71, 95% CI 1.17-2.50; p=0.005). Conclusions: This study provides evidence for the long-term effectiveness of an extended digital therapeutic intervention. Implications The long-term effectiveness of digital smoking cessation interventions has not been well-studied. This study established the long-term effectiveness of an extended CBT-based intervention; results may inform implementation of scalable, cost-effective approaches to smoking cessation in the health system
Janus monolayers of transition metal dichalcogenides.
Structural symmetry-breaking plays a crucial role in determining the electronic band structures of two-dimensional materials. Tremendous efforts have been devoted to breaking the in-plane symmetry of graphene with electric fields on AB-stacked bilayers or stacked van der Waals heterostructures. In contrast, transition metal dichalcogenide monolayers are semiconductors with intrinsic in-plane asymmetry, leading to direct electronic bandgaps, distinctive optical properties and great potential in optoelectronics. Apart from their in-plane inversion asymmetry, an additional degree of freedom allowing spin manipulation can be induced by breaking the out-of-plane mirror symmetry with external electric fields or, as theoretically proposed, with an asymmetric out-of-plane structural configuration. Here, we report a synthetic strategy to grow Janus monolayers of transition metal dichalcogenides breaking the out-of-plane structural symmetry. In particular, based on a MoS2 monolayer, we fully replace the top-layer S with Se atoms. We confirm the Janus structure of MoSSe directly by means of scanning transmission electron microscopy and energy-dependent X-ray photoelectron spectroscopy, and prove the existence of vertical dipoles by second harmonic generation and piezoresponse force microscopy measurements
Trust as a mediator in the relationship between childhood sexual abuse and IL-6 level in adulthood
Childhood sexual abuse (CSA) has been shown to predict the coupling of depression and inflammation in adulthood. Trust within intimate relationships, a core element in marital relations, has been shown to predict positive physical and mental health outcomes, but the mediating role of trust in partners in the association between CSA and inflammation in adulthood requires further study. The present study aimed to examine the impact of CSA on inflammatory biomarkers (IL-6 and IL-1β) in adults with depression and the mediating role of trust. A cross-sectional survey data set of adults presenting with mood and sleep disturbance was used in the analysis. CSA demonstrated a significant negative correlation with IL-6 level (r = -0.28, p<0. 01) in adults with clinically significant depression, while trust showed a significant positive correlation with IL-6 level (r = 0.36, p < .01). Sobel test and bootstrapping revealed a significant mediating role for trust between CSA and IL-6 level. CSA and trust in partners were revealed to have significant associations with IL-6 level in adulthood. Counterintuitively, the directions of association were not those expected. Trust played a mediating role between CSA and adulthood levels of IL-6. Plausible explanations for these counterintuitive findings are discussed
- …