Representativeness of the European Social Partner Organizations: Tanning and Leather Industry

This study provides information designed to encourage sectoral social dialogue in the tanning and leather sector. The aim of Eurofound’s series of studies on representativeness is to identify the relevant national and supranational social partner organisations in the field of industrial relations in selected sectors. The study identified IndustriAll Europe (representing employees) and the Confederation of National Associations of Tanners and Dressers of the European Community (COTANCE) (representing employers) as the most important European level social partner organisations in the sector

Knee adduction moment and medial contact force - facts about their correlation during gait

The external knee adduction moment is considered a surrogate measure for the medial tibiofemoral contact force and is commonly used to quantify the load reducing effect of orthopedic interventions. However, only limited and controversial data exist about the correlation between adduction moment and medial force. The objective of this study was to examine whether the adduction moment is indeed a strong predictor for the medial force by determining their correlation during gait. Instrumented knee implants with telemetric data transmission were used to measure tibiofemoral contact forces in nine subjects. Gait analyses were performed simultaneously to the joint load measurements. Skeletal kinematics, as well as the ground reaction forces and inertial parameters, were used as inputs in an inverse dynamics approach to calculate the external knee adduction moment. Linear regression analysis was used to analyze the correlation between adduction moment and medial force for the whole stance phase and separately for the early and late stance phase. Whereas only moderate correlations between adduction moment and medial force were observed throughout the whole stance phase (R(2)?=?0.56) and during the late stance phase (R(2)?=?0.51), a high correlation was observed at the early stance phase (R(2)?=?0.76). Furthermore, the adduction moment was highly correlated to the medial force ratio throughout the whole stance phase (R(2)?=?0.75). These results suggest that the adduction moment is a surrogate measure, well-suited to predicting the medial force ratio throughout the whole stance phase or medial force during the early stance phase. However, particularly during the late stance phase, moderate correlations and high inter-individual variations revealed that the predictive value of the adduction moment is limited. Further analyses are necessary to examine whether a combination of other kinematic, kinetic or neuromuscular factors may lead to a more reliable prediction of the force magnitud

Theory of Spin-Conserving Excitation of the N−V−N-V^- Center in Diamond

The negatively charged nitrogen-vacancy defect ($N-V^-$ center) in diamond is an important atomic-scale structure that can be used as a qubit in quantum computing and as a marker in biomedical applications. Its usefulness relies on the ability to optically excite electrons between well-defined gap states, which requires clear and detailed understanding of the relevant states and excitation processes. Here we show that by using hybrid density-functional-theory calculations in a large supercell we can reproduce the zero-phonon line and the Stokes and anti-Stokes shifts, yielding a complete picture of the spin-conserving excitation of this defect.Comment: 4 pages, 2 figure

Detection and clearing of trapped ions in the high current Cornell photoinjector

We have recently performed experiments to test the effectiveness of three ion-clearing strategies in the Cornell high intensity photoinjector: DC clearing electrodes, bunch gaps, and beam shaking. The photoinjector reaches a new regime of linac beam parameters where high CW beam currents lead to ion trapping. Therefore ion mitigation strategies must be evaluated for this machine and other similar future high current linacs. We have developed several techniques to directly measure the residual trapped ions. Our two primary indicators of successful clearing are the amount of ion current removed by a DC clearing electrode, and the absence of bremsstrahlung radiation generated by beam-ion interactions. Measurements were taken for an electron beam with an energy of 5 MeV and CW beam currents in the range of 1-20 mA. Several theoretical models have been developed to explain our data. Using them, we are able to estimate the clearing electrode voltage required for maximum ion clearing, the creation and clearing rates of the ions while employing bunch gaps, and the sinusoidal shaking frequency necessary for clearing via beam shaking. In all cases, we achieve a maximum ion clearing of at least 70 percent or higher, and in some cases our data is consistent with full ion clearing

Standardized loads acting in knee implants

The loads acting in knee joints must be known for improving joint replacement, surgical procedures, physiotherapy, biomechanical computer simulations, and to advise patients with osteoarthritis or fractures about what activities to avoid. Such data would also allow verification of test standards for knee implants. This work analyzes data from 8 subjects with instrumented knee implants, which allowed measuring the contact forces and moments acting in the joint. The implants were powered inductively and the loads transmitted at radio frequency. The time courses of forces and moments during walking, stair climbing, and 6 more activities were averaged for subjects with I) average body weight and average load levels and II) high body weight and high load levels. During all investigated activities except jogging, the high force levels reached 3,372–4,218N. During slow jogging, they were up to 5,165N. The peak torque around the implant stem during walking was 10.5 Nm, which was higher than during all other activities including jogging. The transverse forces and the moments varied greatly between the subjects, especially during non-cyclic activities. The high load levels measured were mostly above those defined in the wear test ISO 14243. The loads defined in the ISO test standard should be adapted to the levels reported here. The new data will allow realistic investigations and improvements of joint replacement, surgical procedures for tendon repair, treatment of fractures, and others. Computer models of the load conditions in the lower extremities will become more realistic if the new data is used as a gold standard. However, due to the extreme individual variations of some load components, even the reported average load profiles can most likely not explain every failure of an implant or a surgical procedure

The Calcineurin-FoxO-MuRF1 signaling pathway regulates myofibril integrity in cardiomyocytes.

Altered Ca2+ handling is often present in diseased hearts undergoing structural remodeling and functional deterioration. However, whether Ca2+ directly regulates sarcomere structure has remained elusive. Using a zebrafish ncx1 mutant, we explored the impacts of impaired Ca2+ homeostasis on myofibril integrity. We found that the E3 ubiquitin ligase murf1 is upregulated in ncx1-deficient hearts. Intriguingly, knocking down murf1 activity or inhibiting proteasome activity preserved myofibril integrity, revealing a MuRF1-mediated proteasome degradation mechanism that is activated in response to abnormal Ca2+ homeostasis. Furthermore, we detected an accumulation of the murf1 regulator FoxO in the nuclei of ncx1-deficient cardiomyocytes. Overexpression of FoxO in wild type cardiomyocytes induced murf1 expression and caused myofibril disarray, whereas inhibiting Calcineurin activity attenuated FoxO-mediated murf1 expression and protected sarcomeres from degradation in ncx1-deficient hearts. Together, our findings reveal a novel mechanism by which Ca2+ overload disrupts myofibril integrity by activating a Calcineurin-FoxO-MuRF1-proteosome signaling pathway

Current trends in product lifecycle management

Efficient and effective Product Lifecycle Management, as an evolution and enhancement of Product Data Management, is of strategic importance for virtually any company. Hence, it is crucial for companies to analyze and evaluate recent trends in information technology (IT) and their implications on Product Lifecycle Management. In this paper, the results of an interdisciplinary study conducted by Siemens AG, a major international technologies firm, and two universities are presented. The study identifies four current trends in IT and then evaluates their potential implications on Product Lifecycle Management. Finally, the IT trends are ranked according to their short and medium term effects on Product Lifecycle Management.<br /

An Evaluation of the Clinical Evidence on the Role of Inflammation and Oxidative Stress in Smoking-Mediated Cardiovascular Disease

The number of fatalities due to cardiovascular disease (CVD) continues to be far ahead of loss of human life caused by any other type of disease worldwide. According to the WHO, the annual global tobacco death toll is already 8.4 million and will reach 10 million by the year 2025. However, in contrast to other modifiable primary risk factors for CVD such as obesity, primary prevention strategies for smokers unable to quit are not available to date. This Review, by adopting the principles of evidence-based medicine, summarizes the most recent clinical studies on CVD in smokers, and concludes by suggesting a novel primary prevention strategy for CVD in smokers unable to quit. Evidence gathered from mechanistic studies involving basic research as well as large population-based approaches point to oxidative stress as the major insult imposed by cigarette smoke (CS), and a state of systemic inflammation, as signified by increased hs (high sensitivity) CRP levels in smokers, as the decisive pro-atherogenic response of the body to the initial insult. Since we identified oxidative stress induced by heavy metals as a significant pro-atherogenic activity of CS, strategies aimed at detoxifying heavy metals and combating inflammation appear as plausible approaches to counteract the accelerated onset of CVD in smokers. For this purpose, we discuss metal chelating agents and statins as promising novel primary prevention strategies in smokers unable to quit

LidarCLIP or: How I Learned to Talk to Point Clouds

Research connecting text and images has recently seen several breakthroughs, with models like CLIP, DALL-E 2, and Stable Diffusion. However, the connection between text and other visual modalities, such as lidar data, has received less attention, prohibited by the lack of text-lidar datasets. In this work, we propose LidarCLIP, a mapping from automotive point clouds to a pre-existing CLIP embedding space. Using image-lidar pairs, we supervise a point cloud encoder with the image CLIP embeddings, effectively relating text and lidar data with the image domain as an intermediary. We show the effectiveness of LidarCLIP by demonstrating that lidar-based retrieval is generally on par with image-based retrieval, but with complementary strengths and weaknesses. By combining image and lidar features, we improve upon both single-modality methods and enable a targeted search for challenging detection scenarios under adverse sensor conditions. We also explore zero-shot classification and show that LidarCLIP outperforms existing attempts to use CLIP for point clouds by a large margin. Finally, we leverage our compatibility with CLIP to explore a range of applications, such as point cloud captioning and lidar-to-image generation, without any additional training. Code and pre-trained models are available at https://github.com/atonderski/lidarclip