PIV measurements over a double bladed Darrieus-type vertical axis wind turbine: A validation benchmark

Vertical axis wind turbines (VAWTs) are very attractive for in-home power generation since they can be adopted even at low wind speeds and highly variable wind direction. Even if significant experimental research activity has been carried out to improve VAWTs performance, the ability to accurately reproduce flow field characteristics around turbine blades by CFD (computational fluid dynamics) techniques represents a powerful approach to further enhance wind turbines performance. Thanks to CFD, in fact, it is possible to reproduce flow characteristics with a detail level impossible to achieve by experiments. Nevertheless, in order to appropriately analyze the flow structure by CFD application, an accurate validation is essential, and high-quality measurements of some main flow characteristics are required. In recent publications the authors investigated, both experimentally and numerically, the performance of an innovative double bladed Darrieus-type VAWT, with the aim to define an optimal configuration also focusing on self-starting ability of the prototype by employing CFD technique. Nevertheless, comparison between experiments and numerical results was made only in terms of power and torque coefficient. To overcome such limitation, in this paper the authors propose an experimental benchmark case for CFD results validation, describing detailed flow field in correspondence of one pair of blades of the innovative Darrieus-type VAWT in static conditions. Measurements were performed employing Particle Image Velocimetry (PIV) technique on a scaled model of the turbine blades realized by 3D printing. An uncertainty analysis was also performed which showed a high accuracy of the obtained experimental results. The measurements of the main flow characteristics (bi-dimensional velocity components) were then used for a test case CFD validation of two different turbulence model

A Process to Effectively Identify “Guilty” Performance Antipatterns

Abstract. The problem of interpreting the results of software perfor-mance analysis is very critical. Software developers expect feedbacks in terms of architectural design alternatives (e.g., split a software compo-nent in two components and re-deploy one of them), whereas the results of performance analysis are either pure numbers (e.g. mean values) or functions (e.g. probability distributions). Support to the interpretation of such results that helps to fill the gap between numbers/functions and software alternatives is still lacking. Performance antipatterns can play a key role in the search of performance problems and in the formulation of their solutions. In this paper we tackle the problem of identifying, among a set of detected performance antipatterns, the ones that are the real causes of problems (i.e. the “guilty ” ones). To this goal we intro-duce a process to elaborate the performance analysis results and to score performance requirements, model entities and performance antipatterns. The cross observation of such scores allows to classify the level of guilti-ness of each antipattern. An example modeled in Palladio is provided to demonstrate the validity of our approach by comparing the performance improvements obtained after removal of differently scored antipatterns

Numerical and Experimental Investigation of the Flow over a Car Prototype for the Shell Eco Marathon

The Eco-Marathon is a challenge organized by Shell in which student teams compete in designing energy-efficient vehicles. The event spark debate about the future of mobility and inspire engineers to push the boundaries of fuel efficiency. The aim of the present work consists of the numerical and experimental investigation of the aerodynamic performance of a Shell Eco Marathon prototype designed by a group of students of the University of Cassino, Italy. The car design has been provided by means of detailed 3D CFD modelling with Comsol Multiphysics®. The numerical tool has been validated against experiments conducted at the Laboratory of Industrial Measurements (LaMI) of the University of Cassino. In particular, a scale model of the car has been investigated in an open chamber wind tunnel by means of the Particle Image Velocimetry (PIV) technique, for different free stream velocities within the range 11 – 23 m/s. Measurements have been associated to a proper uncertainty analysis. The experimental data has been compared to numerical results obtained employing different turbulence models and the validated numerical tool has been applied to the simulation of the full-scale car model, allowing to analyse the wake flow structures, and estimate the overall drag coefficient

Dancing With Parkinson's Disease: The SI-ROBOTICS Study Protocol

Introduction: Parkinson's disease (PD) is one of the most frequent causes of disability among older people, characterized by motor disorders, rigidity, and balance problems. Recently, dance has started to be considered an effective exercise for people with PD. In particular, Irish dancing, along with tango and different forms of modern dance, may be a valid strategy to motivate people with PD to perform physical activity. The present protocol aims to implement and evaluate a rehabilitation program based on a new system called “SI-ROBOTICS,” composed of multiple technological components, such as a social robotic platform embedded with an artificial vision setting, a dance-based game, environmental and wearable sensors, and an advanced AI reasoner module. Methods and Analysis: For this study, 20 patients with PD will be recruited. Sixteen therapy sessions of 50 min will be conducted (two training sessions per week, for 8 weeks), involving two patients at a time. Evaluation will be primarily focused on the acceptability of the SI-ROBOTICS system. Moreover, the analysis of the impact on the patients' functional status, gait, balance, fear of falling, cardio-respiratory performance, motor symptoms related to PD, and quality of life, will be considered as secondary outcomes. The trial will start in November 2021 and is expected to end by April 2022. Discussions: The study aims to propose and evaluate a new approach in PD rehabilitation, focused on the use of Irish dancing, together with a new technological system focused on helping the patient perform the dance steps and on collecting kinematic and performance parameters used both by the physiotherapist (for the evaluation and planning of the subsequent sessions) and by the system (to outline the levels of difficulty of the exercise). Ethics and Dissemination: The study was approved by the Ethics Committee of the IRCCS INRCA. It was recorded in ClinicalTrials.gov on the number NCT05005208. The study findings will be used for publication in peer-reviewed scientific journals and presentations in scientific meetings

Reliability Analysis of Component-Based Systems with Multiple Failure Modes

This paper presents a novel approach to the reliability modeling and analysis of a component-based system that allows dealing with multiple failure modes and studying the error propagation among components. The proposed model permits to specify the components attitude to produce, propagate, transform or mask different failure modes. These component-level reliability specifications together with information about systems global structure allow precise estimation of reliability properties by means of analytical closed formulas, probabilistic modelchecking or simulation methods. To support the rapid identification of components that could heavily affect systems reliability, we also show how our modeling approach easily support the automated estimation of the system sensitivity to variations in the reliability properties of its components. The results of this analysis allow system designers and developers to identify critical components where it is worth spending additional improvement efforts

Lightweight Testing of Communication Networks with e-Motions

This paper illustrates the use of high-level domain specific models to specify and test some performance properties of complex systems, in particular Communication Networks, using a light-weight approach. By following a Model-Driven Engineering (MDE) approach, we show the benefits of constructing very abstract models of the systems under test, which can then be easily prototyped and analysed to explore their properties. For this purpose we use e-Motions, a language and its supporting toolkit that allows end-user modelling of real-time systems and their analysis in a graphical manner.Junta de Andalucía P07-TIC-03184Ministerio de Ciencia e Innovación TIN2008-0310

Search based software engineering: Trends, techniques and applications

© ACM, 2012. This is the author's version of the work. It is posted here by permission of ACM for your personal use. Not for redistribution. The definitive version is available from the link below.In the past five years there has been a dramatic increase in work on Search-Based Software Engineering (SBSE), an approach to Software Engineering (SE) in which Search-Based Optimization (SBO) algorithms are used to address problems in SE. SBSE has been applied to problems throughout the SE lifecycle, from requirements and project planning to maintenance and reengineering. The approach is attractive because it offers a suite of adaptive automated and semiautomated solutions in situations typified by large complex problem spaces with multiple competing and conflicting objectives. This article provides a review and classification of literature on SBSE. The work identifies research trends and relationships between the techniques applied and the applications to which they have been applied and highlights gaps in the literature and avenues for further research.EPSRC and E

Experience with model-based performance, reliability and adaptability assessment of a complex industrial architecture

In this paper, we report on our experience with the application of validated models to assess performance, reliability, and adaptability of a complex mission critical system that is being developed to dynamically monitor and control the position of an oil-drilling platform. We present real-time modeling results that show that all tasks are schedulable. We performed stochastic analysis of the distribution of task execution time as a function of the number of system interfaces. We report on the variability of task execution times for the expected system configurations. In addition, we have executed a system library for an important task inside the performance model simulator. We report on the measured algorithm convergence as a function of the number of vessel thrusters. We have also studied the system architecture adaptability by comparing the documented system architecture and the implemented source code. We report on the adaptability findings and the recommendations we were able to provide to the system’s architect. Finally, we have developed models of hardware and software reliability. We report on hardware and software reliability results based on the evaluation of the system architecture