606 research outputs found
Fast 2-D soft X-ray imaging device based on micro pattern gas detector
Abstract An innovative fast system for X-ray imaging has been developed at ENEA Frascati (Italy) to be used as diagnostic of magnetic plasmas for thermonuclear fusion. It is based on a pinhole camera coupled to a Micro Pattern Gas Detector (MPGD) having a Gas Electron Multiplier (GEM) as amplifying stage. This detector (2.5 cm Ă 2.5 cm active area) is equipped with a 2-D read-out printed circuit board with 144 pixels (12 Ă 12), with an electronic channel for each pixel (charge conversion, shaping, discrimination and counting). Working in photon counting mode, in proportional regime, it is able to get X-ray images of the plasma in a selectable X-ray energy range, at very high photon fluxes (106 ph s - 1mmâ2 all over the detector) and high framing rate (up to 100 kHz). It has very high dynamic range, high signal to noise ratio (statistical) and large flexibility in the optical configurations (magnification and views on the plasma). The system has been tested successfully on the Frascati Tokamak Upgrade (FTU), having central electron temperature of a few keV and density of 1020 mâ3, during the summer 2001, with a one-dimensional perpendicular view of the plasma. In collaboration with ENEA, the Johns Hopkins University (JHU) and Princeton Plasma Physics (PPPL), this system has been set up and calibrated in the X-ray energy range 2â8 keV and it has been installed, with a two-dimensional tangential view, on the spherical tokamak NSTX at Princeton. Time resolved X-ray images of the NSTX plasma core have been obtained. Fast acquisitions, performed up to 50 kHz of framing rate, allow the study of the plasma evolution and its magneto-hydrodynamic instabilities, while with a slower sampling (a few kHz) the curvature of the magnetic surfaces can be measured. All these results reveal the good imaging properties of this device at high time resolution, despite of the low number of pixels, and the effectiveness of the fine controlled energy discrimination
X-VUV spectroscopic imaging with a micropattern gas detector
Abstract An innovative system which combines very fast 2D imaging capabilities with spectral resolution in the X-VUV range 0.2â8 keV has been developed at ENEA-Frascati (Italy) in collaboration with INFN-Pisa (Italy). It is based on a pinhole camera coupled to a micropattern gas detector having a gas electron multiplier as gas amplifying stage. This detector (2.5 cmĂ2.5 cm active area), equipped with a 2D read-out printed circuit board with 144 pixels in a square matrix geometry (12Ă12) has been adapted to work at low energy, as far as 0.2 keV, in various configurations. Spectra with different X-VUV laboratory sources, energy calibrations curves and detection efficiency are discussed for all the proposed configurations. Thanks to the high photon flux (10 6 ph/s mm 2 ) detected by this device, high time resolution can be obtained (framing rates up to 100 kHz). The full system has been tested on the Frascati Tokamak Upgrade in 2001 and on the National Spherical Tokamak eXperiments (NSTX) in 2002 as a possible diagnostic tool for magnetic fusion plasmas. Time-resolved 2D images are presented. These results open the way to a new X-VUV imaging technique, where the low definition (limited number of pixels) is highly compensated by the strongly enhanced contrast due to the fine and controlled energy discrimination and by the capability to get images in a selected energy range. The innovative combination of these two major characteristics, make this device a candidate for applications beyond the magnetic plasma physics field
A two-step parallel plate chamber with a resistive germanium anode and a two dimensional readout for the detection of minimum ionizing particles
Abstract A parallel plate avalanche chamber specially suited for the high resolution detection of minimum ionizing particles (m.i.p.) is presented. The anode is made of a thin germanium layer with a sheet resistivity > 1 M Ω/p[ while the cathode is made of a nickel mesh having 600 line pairs/in. A chess board of pads placed behind the anode plane is used to obtain the positional information. A 100% detection efficiency, a 40 ns (fwhm) time resolution and a spatial resolution better than 140 Όm (fwhm) for both coordinates have been measured
Laboratory implementation of edge illumination X-ray phase-contrast imaging with energy-resolved detectors
Edge illumination (EI) X-ray phase-contrast imaging (XPCI) has potential for applications in different fields of research, including materials science, non-destructive industrial testing, small-animal imaging, and medical imaging. One of its main advantages is the compatibility with laboratory equipment, in particular with conventional non-microfocal sources, which makes its exploitation in normal research laboratories possible. In this work, we demonstrate that the signal in laboratory implementations of EI can be correctly described with the use of the simplified geometrical optics. Besides enabling the derivation of simple expressions for the sensitivity and spatial resolution of a given EI setup, this model also highlights the EIâs achromaticity. With the aim of improving image quality, as well as to take advantage of the fact that all energies in the spectrum contribute to the image contrast, we carried out EI acquisitions using a photon-counting energy-resolved detector. The obtained results demonstrate that this approach has great potential for future laboratory implementations of EI. © (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only
A microstrip gas avalanche chamber with two-dimensional readout
Abstract A microstrip gas avalanche chamber with a 200 ÎŒm anode pitch has been built and successfully tested in our laboratory. A gas gain of 104 and an energy resolution of 18% (FWHM) at 6 keV have been measured using a gas mixture of argon-CO2 at atmospheric pressure. A preliminary measurement of the positional sensitivity indicates that a spatial resolution of 50 ÎŒm can be obtained
A novel type of parallel plate chamber with resistive germanium anode and a two-dimensional readout
Abstract A parallel plate counter with a resistive anode and a two-dimensional readout is presented. The anode is made of a thin germanium layer with a sheet resistivity â©Ÿ 1 M Ï /square and the cathode is made of aluminized mylar 5 ÎŒm thick. The anode is transparent to the fast impulse due to the collection of the multiplication electrons. A chessboard of "pads" placed behind the anode plane is used to obtain the positional information. The detector and the readout system are physically and logically separated. An overall spatial resolution of 70 ÎŒm (rms) for both coordinates has been measured
Reading a GEM with a VLSI pixel ASIC used as a direct charge collecting anode
In MicroPattern Gas Detectors (MPGD) when the pixel size is below 100 micron
and the number of pixels is large (above 1000) it is virtually impossible to
use the conventional PCB read-out approach to bring the signal charge from the
individual pixel to the external electronics chain. For this reason a custom
CMOS array of 2101 active pixels with 80 micron pitch, directly used as the
charge collecting anode of a GEM amplifying structure, has been developed and
built. Each charge collecting pad, hexagonally shaped, realized using the top
metal layer of a deep submicron VLSI technology is individually connected to a
full electronics chain (pre-amplifier, shaping-amplifier, sample and hold,
multiplexer) which is built immediately below it by using the remaining five
active layers. The GEM and the drift electrode window are assembled directly
over the chip so the ASIC itself becomes the pixelized anode of a MicroPattern
Gas Detector. With this approach, for the first time, gas detectors have
reached the level of integration and resolution typical of solid state pixel
detectors. Results from the first tests of this new read-out concept are
presented. An Astronomical X-Ray Polarimetry application is also discussed.Comment: 11 pages, 14 figures, presented at the Xth Vienna Conference on
Instrumentation (Vienna, February 16-21 2004). For a higher resolution paper
contact [email protected]
Energy characterization of Pixirad-1 photon counting detector system
This work is focused on the characterization of the Pixirad-1 detector system from the spectroscopic point of view. An energy calibration has been carried out using different X-ray sources such as fluorescence lines, synchrotron radiation and radioactive elements. The energy resolution has been measured as function of the energy and the results have been compared with theoretical estimation. Last, the charge sharing fraction has been evaluated by exploiting the monochromatic energy of the Elettra synchrotron beam
- âŠ