Dynamic flow phenomena in a foam application unit

If, during the operation of a foam application unit, a change in the foam production is introduced, the change in the flow becomes noticeable at the point of application onlyafter a certain response delay time. During the operation of the unit it is necessary to take this response delay into consideration. By varying the flow of foam in the application unit, the mass content of foam in the unit is changed as a result of the changed pressure inside the unit. The response delay has been mathematically derived for the flow of agiven type of foam through pipes, as well as through a foam printing unit as a whole. A deviation in the yield of foam on the substrate can be avoided by considering the respons delay caused by a change in the foam production process

Footrot and interdigital dermatitis in sheep: Farmer satisfaction with current management, their ideal management and sources used to adopt new strategies

The aims of this research were to identify management practices that sheep farmers currently use to treat and prevent footrot in sheep and whether they consider that these are successful management tools and to find out how sheep farmers would ideally like to manage footrot in their flock. Over 90% of lameness in sheep in the UK is caused by Dichelobacter nodosus, which presents clinically as interdigital dermatitis (ID) alone or with separation of hoof horn (FR). A questionnaire was sent to 265 farmers to investigate their current management and their satisfaction with current management of the spectrum of clinical presentations of footrot. Farmers were also asked their ideal management of footrot and their interest in, and sources of information for, change. Approximately 160 farmers responded. Farmers satisfied with current management reported a prevalence of lameness ≤5%. These farmers caught and treated lame sheep within 3 days of first seeing them lame, and treated sheep with FR and ID with parenteral antibacterials. Farmers dissatisfied with their management reported a prevalence of lameness >5%. These farmers practised routine foot trimming, footbathing and vaccination against footrot. Whilst 89% of farmers said they were satisfied with their management of FR over 34% were interested in changing management. Farmers identified veterinarians as the most influential source for new information. Farmers reported that ideally they would control FR by culling/isolating lame sheep, sourcing replacements from non-lame parents, trimming feet less, using antibacterial treatments less and using vaccination more. Footbathing was a commonly used management that was linked with dissatisfaction and that also was listed highly as an ideal management. Consequently, some of the ideal managements are in agreement with our understanding of disease control (culling and isolation, sourcing healthy replacements) but others are in contrast with our current knowledge of management and farmers self-reporting of satisfaction of management of footrot (less use of antibacterial treatment, more footbathing and vaccination). One explanation for this is the theory of cognitive dissonance where belief follows behaviour, i.e. farmers report that they believe an ideal which is what they are currently doing, even if the management is sub-optimal

The economically optimal design of heat exchangers

A new method to design heat exchangers is proposed, which is based on the process description by Kays and London and lends itself very well to optimization.\ud The method is described by applying it to the economic optimization of a counter-current exchanger, the extension to other flow configurations being selfexplanatory.\u

Absorption and rheological phenomena during foam application on textiles

A simple rheological model has been used to describe foam flow through moving textile assemblies. The validity of this model was tested, and the nature and the relative magnitude of deviations from the model evaluated for several different substrates. Neglecting foam degeneration during transport, the model was found to represent a valuable means of evaluating some rheological and geometrical deviations. The model can be used in a semi-quantitative way to describe absorbency during foam application. Liquid absorption experiments done off-line, absorption during foam application and some earlier results could be described using different theoretical approaches. Some rheological anomalies have been discussed

Flow of foam through plain perforated and woven metal screens

The interaction of foam with textile substrates has been investigated, starting with an attempt to describe the flow of foam in textile–like substrates. This was done by separately evaluating rheology and pressure–drop data. The influence of bubble size was found to be particularly important. In a coaxial cylinder viscometer the viscosity was found to be inversely proportional to bubble size. This finding could not be used to describe the pressure drop of foam flow through flat metal screens according to the d'Arcy equation. Equations could not be satisfactorily derived to describe phenomena such as bubble deformation and diminution, but empirical determination of these parameters could be achieved for each combination of foam and substrate

Compliance Analysis of an Under-Actuated Robotic Finger

Under-actuated robotic hands have multiple applications fields, like prosthetics and service robots. They are interesting for their versatility, simple control and minimal component usage. However, when external forces are applied on the finger-tip, the mechanical structure of the finger might not be able to resist them. In particular, only a subset of disturbance forces will meet finite compliance, while forces in other directions impose null-space motions (infinite compliance). Motivated by the observation that infinite compliance (i.e. zero stiffness) can occur due to under-actuation, this paper presents a geometric analysis of the finger-tip compliance of an under-actuated robotic finger. The analysis also provides an evaluation of the finger design, which determines the set of disturbances that is resisted by finite compliance. The analysis relies on the definition of proper metrics for the joint-configuration space. Trivially, without damping, the mass matrix is used as a metric. However, in the case of damping (power losses), the physical meaningful metric to be used is found to be the damping matrix. Simulation experiments confirm the theoretical results

Synchronous and Sequential Strategies in the Process Design of Cascade Equipment

Cascade or multistage equipment is characterized by the repetition of similar equipment elements in series. Process design, resulting into the main geometric and kinematic dimensions of the equipment, makes use of different strategies. These strategies, based on a process description, the (equality- and inequality) constraints and the number of degrees of freedom of the mathematical system, which describes the process, can be divided in synchronous- and sequential procedures. In a synchronous strategy no a priori requirements are made as to the distribution of a given process variable over the stages, so that the equipment dimensions are obtained simultaneously. In contrast to this a sequential strategy makes use of a priori statements resulting into stage-to-stage calculations and a decreasing number of degrees of freedom. The general theory presented with detailed information on process description, constraints and degrees of freedom, has been applied to the process design of a multi-stage centrifugal compressor

Investigation of liquid-liquid demixing and aggregate formation in a membrane-forming system by means of pulse-induced critical scattering (PICS)

Phase separation phenomena in the quasi-ternary system cellulose acetate (CA)/dioxane/water, used as a typical system in the preparation of polymeric membranes for ultrafiltration and reverse osmosis applications, were investigated by means of pulse-induced critical scattering (PICS). Both the cloud point curve and spinodal curve were determined for CA concentrations up to 20% (w/w). The influence of maleic acid (used as an additive in order to improve the membrane performance) on the position of the binodal and spinodal curves and the demixing kinetics were investigated

Foam generation in a rotor—stator mixer = Schaumerzeugung in einem rotor—stator mischer

The foaming process of an aqueous liquid system with surface active agents and thickeners in a rotor-stator mixer has been studied.\ud \ud The foaming capacity of a rotor—stator mixer may be represented by a so-called mixing characteristic. The foamabilities of several liquid systems have been measured as a function of the mixer geometry and the rotational speed.\ud \ud The hydrodynamics in a rotor-stator mixer is characterized by a Newton—Reynolds relationship. The mechanism of foaming and the dependence of several mixing parameters are different for the turbulent and laminar flow regions. The mixing process is evaluated in both regimes. In the transition region from turbulent to laminar the foaming is very poor in comparison with that in the turbulent and laminar flow regimes.\u