21 research outputs found
The Athena x-ray optics development and accommodation
The Athena mission, under study and preparation by ESA as its second Large-class science mission, requires the largest X-ray optics ever flown, building on a novel optics technology based on mono crystalline silicon. Referred to as Silicon Pore Optics technology (SPO), the optics is highly modular and benefits from technology spin-in from the semiconductor industry. The telescope aperture of about 2.5 meters is populated by around 700 mirror modules, accurately co-aligned to produce a common focus. The development of the SPO technology is a joint effort by European industrial and research entities, working together to address the challenges to demonstrate the imaging performance, robustness and efficient series production of the Athena optics. A technology development plan was established and is being regularly updated to reflect the latest developments, and is fully funded by the ESA technology development programmes. An industrial consortium was formed to ensure coherence of the individual technology development activities. The SPO technology uses precision machined mirror plates produced using the latest generation top quality 12 inch silicon wafers, which are assembled into rugged stacks. The surfaces of the mirror plates and the integral support structure is such, that no glue is required to join the individual mirror plates. Once accurately aligned with respect to each other, the surfaces of the mirror plates merge in a physical bonding process. The resultant SPO mirror modules are therefore very accurate and stable and can sustain the harsh conditions encountered during launch and are able to tolerate the space environment expected during operations. The accommodation of the Athena telescope is also innovative, relying on a hexapod mechanism to align the optics to the selected detector instruments located in the focal plane. System studies are complemented by dedicated technology development activities to demonstrate the capabilities before the adoption of the Athena mission
Silicon pore optics mirror modules for inner and outer radii
Athena (Advanced Telescope for High Energy Astrophysics) is an x-ray observatory using a Silicon Pore Optics telescope and was selected as ESA's second L-class science mission for a launch in 2028. The x-ray telescope consists of several hundreds of mirror modules distributed over about 15-20 radial rings. The radius of curvature and the module sizes vary among the different radial positions of the rings resulting in different technical challenges for mirror modules for inner and outer radii. We present first results of demonstrating Silicon Pore Optics for the extreme radial positions of the Athena telescope. For the inner most radii (0.25 m) a new mirror plate design is shown which overcomes the challenges of larger curvatures, higher stress values and bigger plates. Preliminary designs for the mounting system and its mechanical properties are discussed for mirror modules covering all other radial positions up to the most outer radius of the Athena telescope
The Athena telescope and optics status
The work on the definition and technological preparation of the ATHENA (Advanced Telescope for High ENergy Astrophysics) mission continues to progress. In parallel to the study of the accommodation of the telescope, many aspects of the X-ray optics are being evolved further. The optics technology chosen for ATHENA is the Silicon Pore Optics (SPO), which hinges on technology spin-in from the semiconductor industry, and uses a modular approach to produce large effective area lightweight telescope optics with a good angular resolution. Both system studies and the technology developments are guided by ESA and implemented in industry, with participation of institutional partners. In this paper an overview of the current status of the telescope optics accommodation and technology development activities is provided
Silicon Pore Optics Mirror Module Production and Testing
Silicon Pore Optics (SPO) has been established as a new type of x-ray optics that enables future x-ray observatories such as Athena. SPO is being developed at cosine with the European Space Agency (ESA) and academic and industrial partners. The optics modules are lightweight, yet stiff, high-resolution x-ray optics, that shall allow missions to reach an unprecedentedly large effective area of several square meters, operating in the 0.2 - 12 keV band with an angular resolution better than 5 arc seconds. In this paper we are going to discuss the latest generation production facilities and we are going to present results of the production of mirror modules for a focal length of 12 m, including x-ray test results
Development and manufacturing of SPO X-ray mirrors
The Silicon Pore Optics (SPO) technology has been established as a new type of X-ray optics enabling future X-ray observatories such as ATHENA. SPO is being developed at cosine together with the European Space Agency (ESA) and academic as well as industrial partners. The SPO modules are lightweight, yet stiff, high-resolution X-ray optics, allowing missions to reach a large effective area of several square meters. These properties of the optics are mainly linked to the mirror plates consisting of mono-crystalline silicon. Silicon is rigid, has a relatively low density, a very good thermal conductivity and excellent surface finish, both in terms of figure and surface roughness. For Athena, a large number of mirror plates is required, around 100,000 for the nominal configuration. With the technology spin-in from the semiconductor industry, mass production processes can be employed to manufacture rectangular shapes SPO mirror plates in high quality, large quantity and at low cost. Within the last years, several aspects of the SPO mirror plate have been reviewed and undergone further developments in terms of effective area, intrinsic behavior of the mirror plates and mass production capability. In view of flight model production, a second source of mirror plates has been added in addition to the first plate supplier. The paper will provide an overview of most recent plate design, metrology and production developments