Recent Findings and Open Issues concerning the Seismic Behaviour of Masonry Infill Walls in RC Buildings

The extension of the damages observed after the last major earthquakes shows that the seismic risk mitigation of infilled reinforced concrete structures is a paramount topic in seismic prone regions. In the assessment of existing structures and the design of new ones, the infill walls are considered as nonstructural elements by most of the seismic codes and, generally, comprehensive provisions for practitioners are missing. However, nowadays, it is well recognized by the community the importance of the infills in the seismic behaviour of the reinforced concrete structures. Accurate modelling strategies and appropriate seismic assessment methodologies are crucial to understand the behaviour of existing buildings and to develop efficient and appropriate mitigation measures to prevent high level of damages, casualties, and economic losses. The development of effective strengthening solutions to improve the infill seismic behaviour and proper analytical formulations that could help design engineers are still open issues, among others, on this topic. The main aim of this paper is to provide a state-of-the-art review concerning the typologies of damages observed in the last earthquakes where the causes and possible solutions are discussed. After that, a review of in-plane and out-of-plane testing campaigns from the literature on infilled reinforced concrete frames are presented as well as their relevant findings. The most common strengthening solutions to improve the seismic behaviour are presented, and some examples are discussed. Finally, a brief summary of the modelling strategies available in the literature is presented

Development of a novel CO2splitting fixed-bed reactor based on copper-doped cerium oxide

Global warming has received widespread attention in recent years due to the accumulation of carbon dioxide. Looking at the current energy landscape, new technologies must be developed to reduce CO2 emissions. The present work is aimed to develop and test a new prototype of an innovative reactor for the conversion of CO2 into CO, operating according to a two-phase thermochemical cycle. The innovative and main aspect of this study was the use of a reactor coupled with a new type of catalyst, a copper-doped cerium oxide (Cuδ+2Ce(1-δ)O2), which allowed to decrease the temperature of the reaction up to 850°C, much lower than the models present in the literature, tested on 1300/1400°C and even beyond

An Investigation of Clustering Algorithms in the Identification of Similar Web Pages

In this paper we investigate the effect of using clustering algorithms in the reverse engineering field to identify pages that are similar either at the structural level or at the content level. To this end, we have used two instances of a general process that only differ for the measure used to compare web pages. In particular, two web pages at the structural level and at the content level are compared by using the Levenshtein edit distances and Latent Semantic Indexing, respectively. The static pages of two web applications and one static web site have been used to compare the results achieved by using the considered clustering algorithms both at the structural and content level. On these applications we generally achieved comparable results. However, the investigation has also suggested some heuristics to quickly identify the best partition of web pages into clusters among the possible partitions both at the structural and at the content level

Assessment of a desiccant cooling system in a traditional and innovative nanofluid HVAC system

The topic of energy saving is a constant in everyday life, and it is widespread all over the world. Space heating using solar panels is the most used renewable source of energy, but the application of solar energy for cooling the fluids used for refrigeration is growing very fast. Among the techniques used for refrigeration, this work focused on Desiccant Cooling. In particular, with the use of dynamic simulation software, it was possible to study the heat supplied and the energy consumption of a Heating Ventilation Air Conditioning (HVAC) system of a university building and to compare consumption with those of a Desiccant Cooling system applied to the same building. Four different cases were simulated: two related to the HVAC system, one of which operates with water and glycol and the other one with nanofluid, and the other ones to the Desiccant Cooling system with both types of fluids mentioned above. Keeping the same energy demand of the building in all the simulations, it was found that in summer the Desiccant Cooling system had higher performance than the traditional HVAC system and that the use of the nanofluid in both types of conditioning systems further increased the performance of 21%. Simulations were carried out using TRNSYS software

Seismic Loss Estimation in Pre-1970 Residential RC Buildings: The Role of Infills and Services in Low–Mid-Rise Case Studies

The lessons learned after recent earthquakes have highlighted the key role played by infills and services in damage and loss of Reinforced Concrete (RC) buildings. Their influence in seismic performance and loss estimation of selected RC building case studies is thoroughly analyzed here. The case study selection aims to be representative of existing buildings built in Italy before 1970, and covers a different number of stories and design typologies. The seismic responses of the case-study buildings are numerically analyzed by means of non-linear static pushover analysis (PO) considering a lumped plasticity approach with a quadri-linear flexural response for beam/column elements (properly calibrated for RC elements reinforced with plain bars) and a tri-linear compressive-only axial response with diagonal concentric struts for infill panels (empirically derived from experimental data on hollow clay masonry walls). Economic loss estimation is carried out via a component-based methodology that relies on the main repairing activities and resultant costs required for the refurbishment of infills and services for different damage levels. Accordingly, a damage analysis is performed herein, given the intensity measure, based on a comparison between Interstory drift demand from PO analysis and drift-based fragility functions specific for masonry infills. Loss curves, relating the total building repair cost to peak ground acceleration (PGA), are presented and compared for the analyzed case study buildings to show their trends and quantify the incidence of infills and services with respect to the reconstruction cost. A comparison between these outcomes and those recently found in the literature emphasizes the robustness of the considered approach and the reliability of the hypotheses about damage and loss assessment

On the seismic analysis and design of offshore wind turbines

Offshore wind farms are a collection of offshore wind turbines (OWTs) and are currently being installed in seismically active regions. An OWT consists of a long slender tower with a top-heavy fixed mass (Nacelle) together with a heavy rotating mass (Hub and blades) and is always exposed to variable environmental wind and wave loads. For dynamic analysis, an OWT can also be seen as an inverted pendulum (with over 25%–50% of the total mass concentrated in the upper 3rd of the tower), yet it is not granted that their seismic response is dominated by the first mode. Guidelines for the design of such special structures are not explicitly mentioned in current codes of practice. The aim of this technical note is to identify the design issues and provide a rational background for the seismic analysis. Where feasible, further research work that is needed is also identified and discussed.•Considerations for seismic design.•Design return period.•Types of seismic analysis.•Selection of input motion

Bethe Ansatz Equations for General Orbifolds of N=4 SYM

We consider the Bethe Ansatz Equations for orbifolds of N =4 SYM w.r.t. an arbitrary discrete group. Techniques used for the Abelian orbifolds can be extended to the generic non-Abelian case with minor modifications. We show how to make a transition between the different notations in the quiver gauge theory.Comment: LaTeX, 66 pages, 9 eps figures, minor corrections, references adde

Numerical simulations of the decay of primordial magnetic turbulence

We perform direct numerical simulations of forced and freely decaying 3D magnetohydrodynamic turbulence in order to model magnetic field evolution during cosmological phase transitions in the early Universe. Our approach assumes the existence of a magnetic field generated either by a process during inflation or shortly thereafter, or by bubble collisions during a phase transition. We show that the final configuration of the magnetic field depends on the initial conditions, while the velocity field is nearly independent of initial conditions.Comment: 10 pages, 6 figures, references added, PRD accepte