Redesign of machine component in polymeric matrix composite towards increased productivity

This work is focused in the maximization of the acceleration a 2D Industrial Laser Cutting Machine (ILCM). The changes to be implemented are centered in the replacement of a metallic critical component: the gantry. This component largely influences precision and maximum acceleration. Finite Elements Analysis was performed to the current metallic part. From this analysis the maximum allowed deformations were established. A replacement composite component capable of an equally valid behavior was designed in carbon fiber. To establish the maximum increase in acceleration that does not lead to precision losses, the working conditions were simulated and the acceleration to which the component was subjected to was varied. The variation of the thickness of layers with different orientations and locations in the part allowed for the understanding of how the mass varies along with the maximum possible acceleration. This analysis, asides with considering the maximum force allowed by the linear motor that is responsible by the gantry motion, establishes the limit in terms of maximum acceleration of the machine. An increase of 22% in the maximum acceleration while maintaining the precision is possible due to the higher specific rigidity of composite materials and the use of an optimization heuristic

Chemical and sensorial characterization of tropical syrah wines produced at different altitudes in northeast of the Brazil.

Over the years, viticulture has expanded to new regions outside the temperate zones, such as Northeast Brazil, India, Thailand, Myanmar, Vietnam, Bangladesh and Venezuela, characterized by the production of tropical wines. It is important for the productive sector to comprehend the effects of grapevine interaction with the characteristics of each new region on wines composition. In this study, the composition of wines of Syrah from two regions with different altitudes in Northeast Brazil were analyzed by different methodologies to characterize chemical compounds as sugar, acids, minerals, phenolics (anthocyanins, flavonols, stilbenes and condensed tannins) and the sensory profile. The wines of the Bahia region (1100 m of altitude) obtained high concentrations for chemical parameters related to color, monomeric anthocyanins, stilbenes and monomeric and oligomeric tannins. Wines of the low altitude region, Pernambuco (350 m of altitude) were characterized by higher concentrations of flavonols (kaempferol, isorhamnetin, quercetin and rutin) and polymerized tannins. The chemical composition of wines from the two studied regions was influenced by altitude. A trend towards higher concentrations in most for phenolic compounds analyzed was observed in wines from the higher altitude region during the two years of study. Regarding the sensory profile, fruity, floral, herbaceous and empyreumatic attributes aromatic obtained highest scores in wines of the 350 m altitude region, the other attributes were dependent on the year of harvest

On the cost of database clusters reconfiguration

Database clusters based on share-nothing replication techniques are currently widely accepted as a practical solution to scalability and availability of the data tier. A key issue when planning such systems is the ability to meet service level agreements when load spikes occur or cluster nodes fail. This translates into the ability to provision and deploy additional nodes. Many current research efforts focus on designing autonomic controllers to perform such reconfiguration, tuned to quickly react to system changes and spawn new replicas based on resource usage and performance measurements. In contrast, we are concerned about the inherent impact of deploying an additional node to an online cluster, considering both the time required to finish such an action as well as the impact on resource usage and performance of the cluster as a whole. If noticeable, such impact hinders the practicability of self-management techniques, since it adds an additional dimension that has to be accounted for. Our approach is to systematically benchmark a number of different reconfiguration scenarios to assess the cost of bringing a new replica online. We consider factors such as: workload characteristics, incremental and parallel recovery, flow control and outdatedness of the recovering replica. As a result, we show that research should be refocused from optimizing the capture and transmition of changes to applying them, which in a realistic setting dominates the cost of the recovery operation.Work supported by the Spanish Government under research grant TIN2006-14738-C02-02

Redesign of an industrial laser cutting machine’s gantry in composite material

This work is focused in the design stage of a composite structure intended to replace a metallic critical component in a 2D Industrial Laser Cutting Machine (ILCM). The component is the gantry, largely responsible for most of the ILCM’s characteristics. These include precision and maximum acceleration, which are critical. The dimensioning of the component is initially performed based on analytical models, but latter stages use the numerical capabilities of Finite Elements Method. In the end it is possible to take advantage of the higher specific rigidity of composite materials to increase the maximum acceleration that the machine allows for while maintaining the precision.(undefined

Computational Chemistry Meets Experiments for Explaining the Geometry, Electronic Structure, and Optical Properties of Ca10V6O25

In this paper, we present a combined experimental and theoretical study to disclose, for the first time, the structural, electronic, and optical properties of Ca10V6O25 crystals. The microwave-assisted hydrothermal (MAH) method has been employed to synthesize these crystals with different morphologies, within a short reaction time at 120 °C. First-principle quantum mechanical calculations have been performed at the density functional theory level to obtain the geometry and electronic properties of Ca10V6O25 crystal in the fundamental and excited electronic states (singlet and triplet). These results, combined with the measurements of X-ray diffraction (XRD) and Rietveld refinements, confirm that the building blocks lattice of the Ca10V6O25 crystals consist of three types of distorted 6-fold coordination [CaO6] clusters: octahedral, prism and pentagonal pyramidal, and distorted tetrahedral [VO4] clusters. Theoretical and experimental results on the structure and vibrational frequencies are in agreement. Thus, it was possible to assign the Raman modes for the Ca10V6O25 superstructure, which will allow us to show the structure of the unit cell of the material, as well as the coordination of the Ca and V atoms. This also allowed us to understand the charge transfer process that happens in the singlet state (s) and the excited states, singlet (s*) and triplet (t*), generating the photoluminescence emissions of the Ca10V6O25 crystals