Effect of Four Bleaching Regimens on Color Changes and Microhardness of Dental Nanofilled Composite

Objective. The purpose of this study was to compare the color changes and microhardness of a nanocomposite after four bleaching regimens. Materials. Twenty-five specimens (n = 25) were made with a nanocomposite resin (Filtek Supreme XT). The specimens were divided into five groups equally (n = 5): bleaching groups and control group, as follows: G1: artificial saliva at 37°C; (control) G2: hydrogen peroxide (HP) at 7%; G3: hydrogen peroxide (HP) at 35%; G4: carbamide peroxide (CP) at 10%; G5: carbamide peroxide (CP) 35%. Color measurements were made with spectrophotometer using CIELAB color scale. The Vickers hardness (VHN) measurements were performed at the top surface. The data were analyzed with two-way Analysis of Variance. Results. ΔE and VHN mean values into the groups were not statistically different, however, the VHN mean values before and after storage and bleaching showed statistically significant differences. Conclusion. Nanocomposite samples showed no significant alteration (color and microhardness) after bleaching. Thus, no replacement of restorations is required after bleaching

Fracture strength of flared bovine roots restored with different intraradicular posts

OBJECTIVE: The aim of this study was to evaluate the fracture strength and failure mode of flared bovine roots restored with different intraradicular posts. MATERIAL AND METHODS: Fifty bovine incisors with similar dimensions were selected and their roots were flared until 1.0 mm of dentin wall remained. Next, the roots were allocated into five groups (n=10): GI- cast metal post-and-core; GII- fiber posts plus accessory fiber posts; GIII- direct anatomic post; GIV- indirect anatomic post and GV- control (specimens without intraradicular post). A polyether impression material was used to simulate the periodontal ligament. After periodontal ligament simulation, the specimens were subjected to a compressive load at a crosshead speed of 0.5 mm/min in a servo-hydraulic testing machine (MTS 810) applied at 135º to the long axis of the tooth until failure. The data (N) were subjected to ANOVA and Tukey's post-hoc test (α=0.05). RESULTS: GI and GIV presented higher fracture strength (p;0.05) from GI, GII and GIV. Control specimens (GV) produced the lowest fracture strength mean values (

Evaluation of marginal microleakage in Class II cavities: Effect of microhybrid, flowable, and compactable resins

Objective: The goal of the present study was to evaluate the microleakage on the cementum/dentin and enamel surfaces in Class II restorations, using different kinds of resin composite (microhybrid, flowable, and compactable). Method and materials: Forty human caries-free molars were extracted and selected. Eighty Class II standardized cavities were made in the cervical wall at the cementoenamel junction (CEJ) and at the mesial and distal surfaces. The teeth were divided into four groups: G1 - adhesive system + microhybrid resin composite Z100; G2 - adhesive system + compactable resin composite Prodigy Condensable; G3 - adhesive system + flowable resin composite Revolution + Z100 resin composite; G4 - adhesive system + Revolution fluid resin + compactable resin composite Prodigy Condensable. The adhesive system used in this study was Scotchbond Multi-Purpose Plus. The specimens were thermocycled in baths of 5°C and 55°C for 1,000 cycles and immersed in 50% silver nitrate solution. The specimens then were sectioned and evaluated on degree of dye penetration. Results: The results were evaluated using the nonparametric Kruskall-Wallis test, which showed a statistically significant difference between groups G1 and G4, G2 and G4, and G3 and G4. Conclusions: None of the materials was able to eliminate the marginal microleakage at the cervical wall; the application of a low-viscosity resin composite combined with a compactable resin composite significantly decreased the microleakage

Enceramento diagnóstico: previsibilidade no tratamento estético indireto

O enceramento diagnóstico é uma ferramenta de grande importância dentro da filosofia atual de excelência estética no tratamento restaurador indireto. Trata-se da reprodução em cera realizada a partir de um modelo de estudo e tem como finalidade observar, em três dimensões, a futura forma final dos dentes, ajudar visualmente na realização do preparo dentário e demonstrar ao paciente o resultado final do tratamento antes mesmo de iniciá-lo, obtendo-se, assim, máxima previsibilidade. O objetivo desse artigo é mostrar, através de casos clínicos, a previsibilidade no tratamento restaurador indireto obtida por meio do enceramento diagnóstico