24 research outputs found
Vibration analysis of the beam structure under the moving mass
Analytical solution of vibration of simply supported beam under the action of centralized moving mass and two numerical methods using life and death element method and displacement contact method are analyzed in this paper. The results show that vertical acceleration resulted from speed and centrifugal acceleration resulted from load moving must be taken into consideration for large quality and high speed. The characteristics and applicable situations of the two numerical methods are also studied to provide a basis for analyzing and considering structural dynamic problems of moving load mass
Singularity detection of 2D signals using fractal dimension analysis of scale information
Fractal dimension (FD) analysis has been widely used in signal processing. The key issue in signal processing is the singularity detection. One of the main problems for FD analysis of signals is its susceptibility to measurement noise, likely obscuring the identification of singularities. To address this deficiency, a new physical quantity, named ‘the scale-window fractal dimension (SWFD)’, is proposed and a SWFD analysis method is formed to identify the singularities in the noisy 2D signal. With this method, the noisy 2D signal first is decomposed into sets of scale signals with the aid of 2D Gabor wavelet transforms; then SWFD estimates are calculated along every scale signals to form the FD surface. The singularities can be localized by the sudden changes in the spatial variation of the FD surface. As an application of the method, the identification of damage singularity for an experimental composite plate is performed with the mode shapes measured by a scanning laser vibrometer as the analyzed 2D signals. The results show that the SWFD analysis method has the prominent features of high accuracy of singularity localization and strong robustness to noise
Singularity detection of 2D signals using fractal dimension analysis of scale information
Fractal dimension (FD) analysis has been widely used in signal processing. The key issue in signal processing is the singularity detection. One of the main problems for FD analysis of signals is its susceptibility to measurement noise, likely obscuring the identification of singularities. To address this deficiency, a new physical quantity, named ‘the scale-window fractal dimension (SWFD)’, is proposed and a SWFD analysis method is formed to identify the singularities in the noisy 2D signal. With this method, the noisy 2D signal first is decomposed into sets of scale signals with the aid of 2D Gabor wavelet transforms; then SWFD estimates are calculated along every scale signals to form the FD surface. The singularities can be localized by the sudden changes in the spatial variation of the FD surface. As an application of the method, the identification of damage singularity for an experimental composite plate is performed with the mode shapes measured by a scanning laser vibrometer as the analyzed 2D signals. The results show that the SWFD analysis method has the prominent features of high accuracy of singularity localization and strong robustness to noise
Allogeneic Mesenchymal Stem Cell Therapy for Bisphosphonate-Related Jaw Osteonecrosis in Swine
Bisphosphonates (BPs), which are used to treat a variety of clinical disorders, have the side effect of jawbone necrosis. Currently, there is no reliable treatment for BP-related osteonecrosis of the jaw (BRONJ) due to a lack of understanding of its pathogenesis. To investigate the pathogenesis of BRONJ and observe the treatment effect of bone marrow mesenchymal stem cell (BMMSC) transplantation, we established a preclinical animal model of BRONJ in miniature pigs (minipigs). After treatment with zoledronic acid, the clinical and radiographic manifestations of BRONJ could be observed in minipigs after first premolar extraction. The biological and immunological properties of BMMSCs were impaired in the BP-treated minipigs. Moreover, the ratio of Foxp3-positive regulatory T-cells (Tregs) in peripheral blood decreased, and interleukin (IL)-17 increased in the serum of BP-treated minipigs. After allogeneic BMMSC transplantation via intravenous infusion, mucosal healing and bone reconstruction were observed; IL-17 levels were reduced; and Tregs were elevated. In summary, we established a clinically relevant BRONJ model in minipigs and tested a promising allogeneic BMMSC-based therapy, which may have potential clinical applications for treating BRONJ. © Copyright 2013, Mary Ann Liebert, Inc. 2013
Crop pest image classification based on improved densely connected convolutional network
IntroductionCrop pests have a great impact on the quality and yield of crops. The use of deep learning for the identification of crop pests is important for crop precise management.MethodsTo address the lack of data set and poor classification accuracy in current pest research, a large-scale pest data set named HQIP102 is built and the pest identification model named MADN is proposed. There are some problems with the IP102 large crop pest dataset, such as some pest categories are wrong and pest subjects are missing from the images. In this study, the IP102 data set was carefully filtered to obtain the HQIP102 data set, which contains 47,393 images of 102 pest classes on eight crops. The MADN model improves the representation capability of DenseNet in three aspects. Firstly, the Selective Kernel unit is introduced into the DenseNet model, which can adaptively adjust the size of the receptive field according to the input and capture target objects of different sizes more effectively. Secondly, in order to make the features obey a stable distribution, the Representative Batch Normalization module is used in the DenseNet model. In addition, adaptive selection of whether to activate neurons can improve the performance of the network, for which the ACON activation function is used in the DenseNet model. Finally, the MADN model is constituted by ensemble learning.ResultsExperimental results show that MADN achieved an accuracy and F1Score of 75.28% and 65.46% on the HQIP102 data set, an improvement of 5.17 percentage points and 5.20 percentage points compared to the pre-improvement DenseNet-121. Compared with ResNet-101, the accuracy and F1Score of MADN model improved by 10.48 percentage points and 10.56 percentage points, while the parameters size decreased by 35.37%. Deploying models to cloud servers with mobile application provides help in securing crop yield and quality
Residual lymph node status is an independent prognostic factor in esophageal squamous cell Carcinoma with pathologic T0 after preoperative radiotherapy
An Improved Method of an Image Mosaic of a Tea Garden and Tea Tree Target Extraction
UAV may be limited by its flight height and camera resolution when aerial photography of a tea garden is carried out. The images of the tea garden contain trees and weeds whose vegetation information is similar to tea tree, which will affect tea tree extraction for further agricultural analysis. In order to obtain a high-definition large field-of-view tea garden image that contains tea tree targets, this paper (1) searches for the suture line based on the graph cut method in the image stitching technology; (2) improves the energy function to realize the image stitching of the tea garden; and (3) builds a feature vector to accurately extract tea tree vegetation information and remove unnecessary variables, such as trees and weeds. By comparing this with the manual extraction, the algorithm in this paper can effectively distinguish and eliminate most of the interference information. The IOU in a single mosaic image was more than 80% and the omissions account was 10%. The extraction results in accuracies that range from 84.91% to 93.82% at the different height levels (30 m, 60 m and 100 m height) of single images. Tea tree extraction accuracy rates in the mosaic images are 84.96% at a height of 30 m, and 79.94% at a height of 60 m
A Real-Time Weed Mapping and Precision Herbicide Spraying System for Row Crops
This study developed and field tested an automated weed mapping and variable-rate herbicide spraying (VRHS) system for row crops. Weed detection was performed through a machine vision sub-system that used a custom threshold segmentation method, an improved particle swarm optimum (IPSO) algorithm, capable of segmenting the field images. The VRHS system also used a lateral histogram-based algorithm for fast extraction of weed maps. This was the basis for determining real-time herbicide application rates. The central processor of the VRHS system had high logic operation capacity, compared to the conventional controller-based systems. Custom developed monitoring system allowed real-time visualization of the spraying system functionalities. Integrated system performance was then evaluated through field experiments. The IPSO successfully segmented weeds within corn crop at seedling growth stage and reduced segmentation error rates to 0.1% from 7.1% of traditional particle swarm optimization algorithm. IPSO processing speed was 0.026 s/frame. The weed detection to chemical actuation response time of integrated system was 1.562 s. Overall, VRHS system met the real-time data processing and actuation requirements for its use in practical weed management applications
HLNet Model and Application in Crop Leaf Diseases Identification
Crop disease has been a severe issue for agriculture, causing economic loss for growers. Thus, disease identification urgently needs to be addressed, especially for precision agriculture. As of today, deep learning has been widely used for crop disease identification combined with optical imaging sensors. In this study, a lightweight convolutional neural network model is designed and validated on two publicly available imaging datasets and one self-built dataset with 28 types of leaf and leaf disease images of 6 crops as the research object. This model is an improvement of the existing convolutional neural network, reducing the floating-point operations by 65%. In addition, dilated depth-wise convolutions were used to increase the network receptive field and improve the model recognition accuracy without affecting the network computational speed. Meanwhile, two attention mechanisms are optimized to reduce attention module computation, improving the capability of the model to select the correct regions of interest. After training, this model achieved an average accuracy of 99.86%, and the image calculation speed was 0.173 s. Comparing with 11 backbone models and 5 latest crop leaf disease identification studies, the proposed model achieved the highest accuracy. Therefore, this model with an advantage of balancing between the calculation speed and recognition accuracy. Furthermore, the proposed model provides a theoretical basis and technical support for the practical application and mobile terminal applications of crop disease recognition in precision agriculture