Acceleration Of Protons To Above 6 MeV Using H2O >Snow> Nanowire Targets

A scheme is presented for using H2O >snow> nanowire targets for the generation of fast protons. This novel method may relax the requirements for very high laser intensities, thus reducing the size and cost of laser based ion acceleration system.Physic

5.5-7.5 MeV Proton generation by a moderate intensity ultra-short laser interaction with H2O nano-wire targets

We report on the first generation of 5.5-7.5 MeV protons by a moderate intensity short-pulse laser (4.5 \times 1017 W/cm^2, 50 fsec) interacting with H2O nano-wires (snow) deposited on a Sapphire substrate. In this setup, the laser intensity is locally enhanced by the tip of the snow nano-wire, leading to high spatial gradients. Accordingly, the plasma near the tip is subject to enhanced ponderomotive potential, and confined charge separation is obtained. Electrostatic fields of extremely high intensities are produced over the short scale length, and protons are accelerated to MeV-level energies.Comment: submitted to PRL, under press embargo. 6 figure

Reexamination of a multisetting Bell inequality for qudits

The class of d-setting, d-outcome Bell inequalities proposed by Ji and collaborators [Phys. Rev. A 78, 052103] are reexamined. For every positive integer d > 2, we show that the corresponding non-trivial Bell inequality for probabilities provides the maximum classical winning probability of the Clauser-Horne-Shimony-Holt-like game with d inputs and d outputs. We also demonstrate that the general classical upper bounds given by Ji et al. are underestimated, which invalidates many of the corresponding correlation inequalities presented thereof. We remedy this problem, partially, by providing the actual classical upper bound for d less than or equal to 13 (including non-prime values of d). We further determine that for prime value d in this range, most of these probability and correlation inequalities are tight, i.e., facet-inducing for the respective classical correlation polytope. Stronger lower and upper bounds on the quantum violation of these inequalities are obtained. In particular, we prove that once the probability inequalities are given, their correlation counterparts given by Ji and co-workers are no longer relevant in terms of detecting the entanglement of a quantum state.Comment: v3: Published version (minor rewordings, typos corrected, upper bounds in Table III improved/corrected); v2: 7 pages, 1 figure, 4 tables (substantially revised with new results on the tightness of the correlation inequalities included); v1: 7.5 pages, 1 figure, 4 tables (Comments are welcome

Temperature analysis in the shock waves regime for gas-filled plasma capillaries in plasma-based accelerators

Plasma confinement represents a crucial point for plasma-based accelerators and plasma lenses because it can strongly affect the beam properties. For this reason, an accurate measurement of the plasma parameters, as plasma temperature, pressure and electron density, must be performed. In this paper, we introduce a novel method to detect the plasma temperature and the pressure for gas-filled capillaries in use at the SPARC-LAB test facility. The proposed method is based on the shock waves produced at the ends of the capillary during the gas discharge and the subsequent plasma formation inside it. By measuring the supersonic speed of the plasma outflow, the thermodynamic parameters have been obtained both outside and inside the capillary. A plasma temperature around 1.4 eV has been measured, that depends on the geometric properties and the operating conditions of the capillary

Longitudinal phase-space manipulation with beam-driven plasma wakefields

The development of compact accelerator facilities providing high-brightness beams is one of the most challenging tasks in field of next-generation compact and cost affordable particle accelerators, to be used in many fields for industrial, medical and research applications. The ability to shape the beam longitudinal phase-space, in particular, plays a key role to achieve high-peak brightness. Here we present a new approach that allows to tune the longitudinal phase-space of a high-brightness beam by means of a plasma wakefields. The electron beam passing through the plasma drives large wakefields that are used to manipulate the time-energy correlation of particles along the beam itself. We experimentally demonstrate that such solution is highly tunable by simply adjusting the density of the plasma and can be used to imprint or remove any correlation onto the beam. This is a fundamental requirement when dealing with largely time-energy correlated beams coming from future plasma accelerators

numerical studies on capillary discharges as focusing elements for electron beams

Abstract Active plasma lenses are promising technologies for the focusing of high brightness electron beams due to their radially symmetric focusing and their high field gradients (up to several kT/m). However, in a number of experimental situations, the transverse non-uniformity of the current density flowing in the lens causes beam emittance growth and increases the minimum achievable spot size. To study the physics of the capillary discharge processes employed as active plasma lenses, we developed a 2-D hydrodynamic computational model. Here, we present preliminary simulation results and we compare the computed magnetic field profile with one from literature, which has been experimentally inferred. The result of the comparison is discussed

Focusing of high-brightness electron beams with active-plasma lenses

Plasma-based technology promises a tremendous reduction in size of accelerators used for research, medical, and industrial applications, making it possible to develop tabletop machines accessible for a broader scientific community. By overcoming current limits of conventional accelerators and pushing particles to larger and larger energies, the availability of strong and tunable focusing optics is mandatory also because plasma-accelerated beams usually have large angular divergences. In this regard, active-plasma lenses represent a compact and affordable tool to generate radially symmetric magnetic fields several orders of magnitude larger than conventional quadrupoles and solenoids. However, it has been recently proved that the focusing can be highly nonlinear and induce a dramatic emittance growth. Here, we present experimental results showing how these nonlinearities can be minimized and lensing improved. These achievements represent a major breakthrough toward the miniaturization of next-generation focusing devices

A rapid compression facility study of oh time histories during iso-octane ignition

Abstract Iso-octane ignition delay times (τ ign ) and hydroxyl (OH) radical mole fraction (χ OH ) time histories were measured under conditions relevant to homogeneous charge compression ignition engine operating regimes using the University of Michigan rapid compression facility. Absolute quantitative OH mole fraction time histories were obtained using differential narrow-line laser absorption of the R 1 (5) line of the A 2 Σ + ← X 2 Π i (0, 0) band of the OH spectrum (ν 0 = 32606.56 cm −1 ). Ignition delay times were determined using pressure and OH data. Diluted iso-octane/argon/nitrogen/oxygen mixtures were used with fuel/oxygen equivalence ratios from φ = 0.25 to 0.6 for τ ign measurements and from φ = 0.25 to 0.35 for χ OH measurements. The pressures and temperatures after compression ranged from 8.5 to 15 atm and from 945 to 1020 K, respectively, for the combined τ ign and χ OH data. The maximum mole fraction of OH during ignition and the plateau value of OH after ignition are compared with model predictions using different iso-octane oxidation mechanisms. Sensitivity and rate of production analyses for OH identify reactions important in iso-octane ignition under these lean, intermediate-temperature conditions. The OH time histories show significant sensitivity to the OH + OH + M = H 2 O 2 + M, CH 3 + HO 2 = CH 3 O + OH, and CH 3 + HO 2 = CH 4 + O 2 reactions, which have rate coefficients with relatively high uncertainties. Improved predictions of the OH time histories can be achieved by modifying the rate coefficient for these reactions. The enthalpy of formation used for OH also has a significant effect on the predicted ignition delay times