Stability and Hopf bifurcation of a delay eco‐epidemiological model with nonlinear incidence rate

In this paper, a three‐dimensional eco‐epidemiological model with delay is considered. The stability of the two equilibria, the existence of Hopf bifurcation and the permanence are investigated. It is found that Hopf bifurcation occurs when the delay τ passes a sequence of critical values. Moreover, by applying Nyquist criterion, the length of delay is estimated for which the stability continues to hold. Numerical simulation with a hypothetical set of data has been done to support the analytical results. This work is supported by the National Natural Science Foundation of China (No. 10771104 and No.10471117), Program for Innovative Research Team (in Science and Technology) in University of Henan Province (No. 2010IRTSTHN006) and Program for Key Laboratory of Simulation and Control for Population Ecology in Xinyang Normal University (No. 201004) and Natural Science Foundation of the Education Department of Henan Province (No. 2009B1100200 and No. 2010A110017) First published online: 10 Feb 201

Nonlinear Nanophotonic Devices in the Ultraviolet to Visible Wavelength Range

Although the first lasers invented operated in the visible, the first on-chip devices were optimized for near-infrared (IR) performance driven by demand in telecommunications. However, as the applications of integrated photonics has broadened, the wavelength demand has as well, and we are now returning to the visible (Vis) and pushing into the ultraviolet (UV). This shift has required innovations in device design and in materials as well as leveraging nonlinear behavior to reach these wavelengths. This review discusses the key nonlinear phenomena that can be used as well as presents several emerging material systems and devices that have reached the UV–Vis wavelength range

Nonlinear nanophotonic devices in the Ultraviolet to Visible wavelength range

Although the first lasers invented operated in the visible, the first on-chip devices were optimized for near-infrared (IR) performance driven by demand in telecommunications. However, as the applications of integrated photonics has broadened, the wavelength demand has as well, and we are now returning to the visible (Vis) and pushing into the ultraviolet (UV). This shift has required innovations in device design and in materials as well as leveraging nonlinear behavior to reach these wavelengths. This review discusses the key nonlinear phenomena that can be used as well as presents several emerging material systems and devices that have reached the UV-Vis wavelength range.Comment: 58 pages, 10 figure

Quantitative Measurement of the Three-dimensional Structure of the Vocal Folds and Its Application in Identifying the Type of Cricoarytenoid Joint Dislocation.

OBJECTIVE(#br)The objective of this study was to quantitatively measure the three-dimensional (3D) structure of the vocal folds in normal subjects and in patients with different types of cricoarytenoid dislocation. We will analyze differences in parameters between the groups and also determine if any morphologic parameters possess utility in distinguishing the type and the degree of cricoarytenoid dislocation.(#br)STUDY DESIGN(#br)This retrospective study was conducted using university hospital data.(#br)METHODS(#br)Subjects’ larynges were scanned using dual-source computed tomography (CT). The normal subjects were divided into deep-inhalation and phonation groups, and patients with cricoarytenoid joint dislocation were divided into anterior-dislocation and posterior-dislocation groups. Membranous vocal fold length and width were measured directly on the thin-section CT images. Vocal fold and airway 3D models were constructed using Mimics software and used in combination to measure vocal fold thickness, subglottal convergence angle, and oblique angle of the vocal folds.(#br)RESULTS(#br)The phonation group displayed a greater vocal fold width, greater oblique angle, thinner vocal folds, and a smaller subglottal convergence angle than those of the deep-inhalation group (P < 0.05). The anterior-dislocation group displayed a smaller oblique angle and subglottal convergence angle than the posterior-dislocation group (P < 0.05).(#br)CONCLUSIONS(#br)The 3D structure of the vocal folds during deep inhalation and phonation can be accurately measured using dual-source CT and laryngeal 3D reconstruction. As the anterior-dislocation group yielded negative values for the oblique angle and the posterior-dislocation group yielded positive values, the oblique angle of the vocal folds may possess utility for distinguishing the type and for quantitatively determining the degree of cricoarytenoid dislocation

Quantitative Measurement of the Three-dimensional Structure of the Vocal Folds and Its Application in Identifying the Type of Cricoarytenoid Joint Dislocation

Summary(#br)Objective(#br)The objective of this study was to quantitatively measure the three-dimensional (3D) structure of the vocal folds in normal subjects and in patients with different types of cricoarytenoid dislocation. We will analyze differences in parameters between the groups and also determine if any morphologic parameters possess utility in distinguishing the type and the degree of cricoarytenoid dislocation.(#br)Study Design(#br)This retrospective study was conducted using university hospital data.(#br)Methods(#br)Subjects’ larynges were scanned using dual-source computed tomography (CT). The normal subjects were divided into deep-inhalation and phonation groups, and patients with cricoarytenoid joint dislocation were divided into anterior-dislocation and posterior-dislocation groups. Membranous vocal fold length and width were measured directly on the thin-section CT images. Vocal fold and airway 3D models were constructed using Mimics software and used in combination to measure vocal fold thickness, subglottal convergence angle, and oblique angle of the vocal folds.(#br)Results(#br)The phonation group displayed a greater vocal fold width, greater oblique angle, thinner vocal folds, and a smaller subglottal convergence angle than those of the deep-inhalation group ( P < 0.05). The anterior-dislocation group displayed a smaller oblique angle and subglottal convergence angle than the posterior-dislocation group ( P < 0.05).(#br)Conclusions(#br)The 3D structure of the vocal folds during deep inhalation and phonation can be accurately measured using dual-source CT and laryngeal 3D reconstruction. As the anterior-dislocation group yielded negative values for the oblique angle and the posterior-dislocation group yielded positive values, the oblique angle of the vocal folds may possess utility for distinguishing the type and for quantitatively determining the degree of cricoarytenoid dislocation

Micro-/Nano-Scales Direct Cell Behavior on Biomaterial Surfaces

Cells are the smallest living units of a human body&rsquo;s structure and function, and their behaviors should not be ignored in human physiological and pathological metabolic activities. Each cell has a different scale, and presents distinct responses to specific scales: Vascular endothelial cells may obtain a normal function when regulated by the 25 &micro;m strips, but de-function if the scale is removed; stem cells can rapidly proliferate on the 30 nm scales nanotubes surface, but stop proliferating when the scale is changed to 100 nm. Therefore, micro and nano scales play a crucial role in directing cell behaviors on biomaterials surface. In recent years, a series of biomaterials surface with micro and/or nano scales, such as micro-patterns, nanotubes and nanoparticles, have been developed to control the target cell behavior, and further enhance the surface biocompatibility. This contribution will introduce the related research, and review the advances in the micro/nano scales for biomaterials surface functionalization

Application of Hydrogels as Three-Dimensional Bioprinting Ink for Tissue Engineering

The use of three-dimensional bioprinting technology combined with the principle of tissue engineering is important for the construction of tissue or organ regeneration microenvironments. As a three-dimensional bioprinting ink, hydrogels need to be highly printable and provide a stiff and cell-friendly microenvironment. At present, hydrogels are used as bioprinting inks in tissue engineering. However, there is still a lack of summary of the latest 3D printing technology and the properties of hydrogel materials. In this paper, the materials commonly used as hydrogel bioinks; the advanced technologies including inkjet bioprinting, extrusion bioprinting, laser-assisted bioprinting, stereolithography bioprinting, suspension bioprinting, and digital 3D bioprinting technologies; printing characterization including printability and fidelity; biological properties, and the application fields of bioprinting hydrogels in bone tissue engineering, skin tissue engineering, cardiovascular tissue engineering are reviewed, and the current problems and future directions are prospected