Bimodal waveguide interferometer RI sensor fabricated on low-cost polymer platform

A refractive index sensor based on bimodal waveguide interferometer is demonstrated on the low-cost polymer platform for the first time. Different from conventional interferometers which make use of the interference between the light from two arms, bimodal waveguide interferometers utilize the interference between the two different internal modes in the waveguide. Since the utilized first higher mode has a wide evanescent tail which interacts with the external environment, the interferometer can reach a high sensitivity. Instead of vertical bimodal structure which is normally employed, the lateral bimodal waveguide is adopted in order to simplify the fabrication process. A unique offset between the centers of single mode waveguide and bimodal waveguide is designed to excite the two different modes with equal power which contributes to the maximum fringe visibility. The bimodal waveguide interferometer is finally fabricated on optical polymer (Ormocore) which is transparent at both infrared and visible wavelengths. It is fabricated using the UV-based soft imprint technique which is simple and reproductive. The bulk sensitivity of fabricated interferometer sensor with a 5 mm sensing length is characterized using different mass concentration sodium chloride solutions. The sensitivity is obtained as 316 pi rad/RIU and the extinction ratio can reach 18 dB

Investigation of grating-assisted trimodal interferometer biosensors based on a polymer platform

A grating-assisted trimodal interferometer biosensor is proposed and numerically analyzed. A long period grating coupler, for adjusting the power between the fundamental mode and the second higher order mode, is investigated, and is shown to act as a conventional directional coupler for adjusting the power between the two arms. The trimodal interferometer can achieve maximal fringe visibility when the powers of the two modes are adjusted to the same value by the grating coupler, which means that a better limit of detection can be expected. In addition, the second higher order mode typically has a larger evanescent tail than the first higher order mode in bimodal interferometers, resulting in a higher sensitivity of the trimodal interferometer. The influence of fabrication tolerances on the performance of the designed interferometer is also investigated. The power difference between the two modes shows inertia to the fill factor of the grating, but high sensitivity to the modulation depth. Finally, a 2050 2π/RIU (refractive index unit) sensitivity and 43 dB extinction ratio of the output power are achieved

Polymer-based microring resonator with the multimode interference coupler operating at very-near-infrared wavelengths

A microring resonator with the multimode interference coupler is fabricated on the polymer platform by using UV-based soft nanoimprint technique. A unique class of fluorinated polymer, perfluoropolyether (PFPE), is employed for the fabrication of the flexible soft mold. By optimizing the proportion between Ormocore and the thinner maT, the microring resonator is fabricated almost without residual layer. The fabricated device with a Q-factor up to 2.3 × 104 is demonstrated for very-near-infrared wavelengths, which shows high potential for sensing applications

3D Model-based Zero-Shot Pose Estimation Pipeline

Most existing learning-based pose estimation methods are typically developed for non-zero-shot scenarios, where they can only estimate the poses of objects present in the training dataset. This setting restricts their applicability to unseen objects in the training phase. In this paper, we introduce a fully zero-shot pose estimation pipeline that leverages the 3D models of objects as clues. Specifically, we design a two-step pipeline consisting of 3D model-based zero-shot instance segmentation and a zero-shot pose estimator. For the first step, there is a novel way to perform zero-shot instance segmentation based on the 3D models instead of text descriptions, which can handle complex properties of unseen objects. For the second step, we utilize a hierarchical geometric structure matching mechanism to perform zero-shot pose estimation which is 10 times faster than the current render-based method. Extensive experimental results on the seven core datasets on the BOP challenge show that the proposed method outperforms the zero-shot state-of-the-art method with higher speed and lower computation cost

Maximising the benefits of calcium carbonate in sustainable cements: opportunities and challenges associated with alkaline waste carbonation

Cement production significantly contributes to global climate change and implementation of carbon capture, utilisation and storage (CCUS) in construction materials is considered a crucial step toward achieving net-zero emissions. Substituting Portland cement (PC) clinker with limestone has been demonstrated to effectively reduce CO2 emissions while enhancing the properties of cement and concrete. Beyond limestone extraction, quarrying, and crushing, various types of alkaline waste materials generated from industrial processes can serve as valuable resources for producing diverse forms of calcium carbonate, simultaneously capturing a substantial amount of CO2. In this context, we contend that due to the distinct characteristics of various calcium carbonate forms, there exists the substantial potential to maximise their technical, economic, and environmental advantages in the production of sustainable cements. We reviewed existing studies of the effects of different calcium carbonate forms on cement properties and underscored the viability of utilising various alkaline wastes to produce different calcium carbonate products. As a promising approach for CO2 reduction, waste management, and resource recovery, we addressed the opportunities and challenges associated with advancing CCUS through the utilisation of carbonated alkaline wastes in sustainable cements. To achieve real-world impacts, we emphasised the necessity for interdisciplinary research collaborations, active involvement from industry stakeholders, regulatory bodies, and governmental support to facilitate the large-scale adoption of these innovative practices

Tilted fiber bragg grating sensor using chemical plating of a palladium membrane for the detection of hydrogen leakage

A tilted fiber Bragg grating (TFBG) hydrogen sensor coated with a palladium (Pd) membrane by the electroless plating method is proposed in this paper. A uniform layer of Pd metal is fabricated in aqueous solutions by the chemical coating method, which is used as the sensitive element to detect the change of the surrounding refractive index (SRI) caused by hydrogen absorption. The change in SRI causes an unsynchronized change of the cladding modes and the Bragg peak in the TFBG transmission spectrum, thereby eliminating the cross-sensitivity due to membrane expansion and is able to simultaneously monitor the presence of cracks in the pipe, as well as the hydrogen leakage. By subtracting the wavelength shift caused by fiber expansion, the change of SRI, i.e., the information from the H2 level, can be separately obtained. The drifted wavelength is measured for the H2 concentration below the hydrogen explosion limit between 1% and 4%. The chemical-based coating has the advantages of a low cost, a simple operation, and being suitable for coating on long fiber structures. The proposed sensor is able to detect the H2 signal in 5 min at a 1% H2 concentration. The proposed sensor is proved to be able to monitor the hydrogen level without the cross-sensitivity of temperature variation and expansion strains, so could be a good candidate for security applications in industr

RF self-interference cancellation using phase modulation and optical sideband filtering

A novel optical approach to implement RF self-interference cancellation for full-duplex communication using phase modulation and optical sideband filtering is proposed and demonstrated experimentally. Based on the inherent out-of-phase property between the left and right sidebands of phase-modulated signal and optical sideband filtering, the RF self-interference cancellation is achieved by tuning the delay time and amplitude in the optical domain. RF self-interference cancellation for single frequency and microwave with various bandwidth of 1MHz, 5MHz and 10 MHz is experimentally demonstrated to verify the proposed technique

Athermal silicon-on-insulator ring resonators by overlaying a polymer cladding on narrowed waveguides

Athermal silicon ring resonators are experimentally demonstrated by overlaying a polymer cladding on narrowed silicon wires. The ideal width to achieve athermal condition for the TE mode of 220nm-height SOI waveguides is found to be around 350nm. After overlaying a polymer layer, the wavelength temperature dependence of the silicon ring resonator is reduced to less than 5 pm/degrees C, almost eleven times less than that of normal silicon waveguides. The optical loss of a 350-nm bent waveguide (with a radius of 15 mu m) is extracted from the ring transmission spectrum. The scattering loss is reduced to an acceptable level of about 50dB/cm after overlaying a polymer cladding. (C) 2009 Optical Society of Americ