4,394 research outputs found
Design of a magnetic-geared outer-rotor permanent-magnet brushless motor for electric vehicles
This paper proposes a novel in-wheel motor, which artfully integrates a magnetic gear into a permanent-magnet brushless (PMBL) DC motor so that they can share a common PM rotor, hence offering both high efficiency and high power density. Moreover, the low-speed requirement for direct driving and the high-speed requirement for compact motor design can be achieved simultaneously. A 2-kW 600/4400-rpm magnetic-geared outer-rotor PMBL DC motor is designed and analyzed, which is particularly suitable for battery-powered electric motorcycles. © 2007 IEEE.published_or_final_versio
Optimal efficiency control of PM hybrid motor drives for electrical vehicles
The paper deals with the control of a novel brushless PM hybrid motor to optimize its efficiency. The approach is to adaptively adjust the field current to minimize the total loss based on its potential for a high efficiency over a wide torque-speed region. The optimal controller has good performance for electrical vehicles.published_or_final_versio
Balanced geological section for extensional tectonic basin and its implication: An example from southern Songliao Basin
挤压构造的平衡地质剖面分析已经广泛应用于造山带构造分析, 但伸展构造区的平衡地质剖面分析实例仍然很少. 运用盆地分析的技术与方法, 分层序或阶段将地质构造依次恢复、地层逐层回剥, 并通过在松辽盆地南部吉林两井油田扶余油层4 条剖面的实践, 复原出不同时代盆地构造与地层发育的连续剖面, 揭示出松辽盆地南部主要构造样式是以浅表构造层次的负花状构造及深层剥离断层发育为特征; 断层生长指数、盆地的伸展史和伸展量等参数显示, 晚白垩世是构造转型的重要阶段, 此前主要为走滑构造样式形成阶段, 此后则主要为伸展滑脱构造发育阶段. 在此基础上, 提出松辽盆地具有伸展- 走滑双重力学构造性质, 可能是一个弧后构造盆地.The balanced geological sect ion has been widely used for the analysis of orogenic belt, but it is infrequent for ex tensional basins. In this paper, 4 extensional balanced geological sect ion analysis were practiced in Fuyu oil layer of Liangjing , Jilin oilfield, southern Songliao basin with the technology and method, including deformation history restoration, decompaction and erosion restoration. The structure of different ages and the continuous sedimentary sections have been restored. T he result s show that the structural styles possess the characteristics of negative flower structure in the shallow level and ex tensional detachment in deep level. The parameters, including fault growth index, the basin ex tensional history and fault detachment depth, indicate that Late Cretaceous is an important stage for the structure transferring mainly with a strike-slip style before this time and an ex tensional structure and detachment after this time. Therefore, a basin model with twin dynamic property and back-arc characters is proposed.published_or_final_versio
A discussion of the paper “Influence of surface charge on ingress of chloride ion in hardened pastes” by Y. Elakneswaran, T. Nawa, and K. Kurumisawa
Novel permanent magnet motor drives for electric vehicles
Novel permanent magnet (PM) motor drives have been successfully developed to fulfil the special requirements for electric vehicles such as high power density, high efficiency, high starting torque, and high cruising speed. These PM motors are all brushless and consist of various types, namely rectangular-fed, sinusoidal-fed, surface-magnet, buried-magnet, and hybrid. The advent of novel motor configurations lies on the unique electro-magnetic topology, including the concept of multipole magnetic circuit and full slot-pitch coil span arrangements, leading to a reduction in both magnetic yoke and copper, decoupling of each phase flux path, and hence an increase in both power density and efficiency. Moreover, with the use of fractional number of slots per pole per phase, the cogging torque can be eliminated. On the other hand, by employing the claw-type rotor structure and fixing an additional field winding as the inner stator, these PM hybrid motors can further provide excellent controllability and improve efficiency map. In the PM motors, by purposely making use of the transformer EMF to prevent the current regulator from saturation, a novel control approach is developed to allow for attaining high-speed constant-power operation which is particularly essential for electric vehicles during cruising. Their design philosophy, control strategy, theoretical analysis, computer simulation, experimental tests and application to electric vehicles are described. © 1996 IEEE.published_or_final_versio
Interleukin-2 Confers Cardioprotection by Inhibiting Mitochondrial Permeability Transition Pore
In the present study, we determined whether interleukin-2 (IL-2) confers cardioprotection by inhibiting mitochondria permeability transition pore (MPTP) opening. In isolated rat hearts subject to 30 min ischemia and 120 min reperfusion (IR), IL-2 (50 U/ml) decreased the infarct size and LDH release, effects blocked by a selective kappa-opioid receptor antagonist, Nor-BNI (5 microM) or an opener of MPTP, atractyloside (Atr, 20 microM). In isolated ventricular myocytes subjected to anoxia and reoxygenation (AR), which reduced both the amplitude of the electrically induced [Ca2+]i transient and diastolic [Ca2+]i, IL-2 attenuated the AR-induced alterations and their effects were abolished by Atr. In addition, IL-2 attenuated the reduction in calcein fluorescence in myocytes subject to AR and reduced calcium-induced swelling in mitochondria of rat hearts subjected to IR, which were similar to effect of inhibitor of MPTP. The observations indicated that IL-2 confers cardioprotection by inhibiting the MPTP opening.published_or_final_versio
Isolation and Characterization of Batatasin III and 3,4’- Dihydroxy-5-methoxybibenzyl: A Pair of Positional Isomers from Sunipia scariosa
Purpose: To isolate and characterize chemical compounds of biological importance from the whole plant of Sunipia scariosa.Methods: The whole plant of Sunipia scariosa was extracted with methanol (MeOH) and chromatographed on silica gel and sephadex LH-20 to afford the pure isolates. High perfomance liquild chromatography (HPLC) was used for further purification of the isolated compounds. Characterization ofthe isolated compounds was achieved by 1H and 13C nuclear magnetic resonance spectroscopy (NMR) and mass spectrometry (MS).Results: Batatasin III (3,3’-dihydroxy-5-methoxybibenzyl) and 3,4’-dihydroxy-5-methoxybibenzyl, a pair of positional isomers, were isolated from the whole plant of Sunipia scariosa. The yields of the two isomers were 60 and 40 %, respectively, from the mixture of two compounds.Conclusion: Batatasin III and 3,4’-dihydroxy-5-methoxybibenzyl, a pair of positional isomers were successfully isolated from the whole plant of Sunipia scariosa for the first time.Keywords: Sunipia scariosa, Batatasin III, 3,4’-Dihydroxy-5-methoxybibenzyl, Isomer
Orientation distribution of cylindrical particles suspended in a turbulent pipe flow
2005-2006 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe
Revealing microstructural evolutions, mechanical properties and wear performance of wire arc additive manufacturing homogeneous and heterogeneous NiTi alloy
Heterogeneous microstructure designs have attracted a great deal of attention, not only because they have the potential to achieve an ideal combination of two conflicting properties, but also because the processes involved in their fabrication are cost-effective and can be scaled up for industrial production. The process parameters in the preparation process have an important effect on the microstructure and properties of alloy members prepared by wire arc additive manufacturing (WAAM) technology. It was expected that the spatial heterogeneous microstructure with large microstructural heterogeneities in metals can be formed through changing the process parameters. In this work, homogeneous NiTi thin-walled component and heterogeneous NiTi thin-walled component were fabricated using WAAM technology by adjusting the heat input. The effects of deposition height and heat input on the microstructure, mechanical properties and wear properties of WAAM NiTi alloys were investigated. The results show that grains were gradually refined with the increase of deposition height in the homogeneous WAAM NiTi component. The ultimate tensile strength of homogeneous WAAM NiTi component increased from 606.87 MPa to 654.45 MPa and the elongation increased from 12.72% to 15.38%, as the increase of deposition height. Moreover, the homogeneous WAAM NiTi component exhibited excellent wear resistance, the coefficient of friction decreased from 0.760 to 0.715 with the increase of deposition height. Meanwhile, the grains in the heterogeneous WAAM NiTi component shows the finest grains in the central region. The ultimate tensile strength of the lower region, middle region and upper region of heterogeneous WAAM NiTi components were 556.12 MPa, 599.53 MPa and 739.79 MPa, and the elongations were 12.98%, 16.69%, 21.74%, respectively. The coefficient of friction for the lower region, middle region and upper region of heterogeneous WAAM NiTi components were 0.713, 0.720 and 0.710, respectively. The microhardness and cyclic compression properties of the homogeneous components with higher heat input were better than those of the heterogeneous components for the same deposition height. The tensile yield strength, elongation and wear resistance of the heterogeneous components were superior compared to the homogeneous components. These results can be used to optimize the WAAM process parameters to prepare NiTi components with excellent mechanical properties
The disc separation and the eigenvalue distribution of the Schur complement of nonstrictly diagonally dominant matrices
- …