8 research outputs found
Double Heteroatom Reconfigured Polar Catalytic Surface Powers High-Performance Lithium–Sulfur Batteries
The modification of apolar carbon materials by heteroatom doping is an effective method that can effectively improve the surface polarity of carbon materials. In the main body of the lithium–sulfur battery cathode, the structural properties of the carbon material itself with porous structure and large specific surface area provide sufficient space for sulfur accommodation and mitigate the bulk effect of the sulfur cathode (79%). The polarized surface of the reconstructed carbon material possesses strong adsorption effect on LiPs, which mitigates the notorious “shuttle effect.” In this paper, the surface structure of the Ketjen black cathode body was reconstructed by B and N double heteroatoms to polarize it. The modified polarized Ketjen black improves the adsorption and anchoring ability of LiPs during the reaction and accelerates their kinetic conversion, while its own uniformly distributed small mesopores and oversized BET structural properties are beneficial to mitigate the bulk effect of sulfur cathodes. Lithium–sulfur batteries using B and N modified cathodes have an initial discharge capacity of 1344.49 mAh/g at 0.1 C and excellent cycling stability at 0.5 C (381.4 mAh/g after 100 cycles)
Thermal stress distribution in a laser array structure selectively grown on V-groove-patterned silicon
The thermal stress due to the thermal expansion mismatch could induce crystallographic defects such as buckling and cracking and degrade device performance. In this paper, the thermal stress distribution in a laser array structure selectively grown on V-groove-patterned Si substrates was investigated by two-dimension finite-element method. Surprisingly, unexpected results are observed that the top of the InGaAs active layer and the most region of the InP cap layer are in compression, which is far different from the thermal stress distribution in planar structures. Two mechanisms have been proposed and modeled to explain the difference—(i) the width of uncoalesced layers is smaller than that of the Si substrate, which causes thermal stress to change in epitaxial layers, and (ii) thermal stress in the InGaAs and InP layers is affected by the V-groove structure. The results show that whether or not the epitaxial layers are coalesced has significant effect on the thermal stress distribution. The effect of the height of the V-groove, the height and the width of the SiO2 mask on the thermal stress distribution was also studied. It is found that the height of V-groove and the height of SiO2 mask play a critical role in the stress distribution. These findings are useful for the optimal designs for the laser array and provide an important step towards the realization of photonic integration circuits on silicon
Research on AC/DC Distribution Network Planning Method
The transition from traditional AC distribution system to future mature AC/DC hybrid distribution mode is an effective means to solve the challenges of high penetration of distributed energy, diversification of energy types, high requirements of power quality and power supply reliability.AC / DC hybrid distribution system can be used in many scenarios by virtue of its technical advantages. This paper analyzes the typical application scenarios of AC / DC distribution network from the perspective of "source network load". Combined with the research status of AC / DC hybrid distribution network, this paper introduces the planning method from three aspects: paper, standard and typical algorithm. Finally, a demonstration project is taken as an example to illustrate the key points of the planning
Influences of ultrathin amorphous buffer layers on GaAs/Si grown by metal–organic chemical vapor deposition
Were Chinese Rulers above the Law? Toward a Theory of the Rule of Law in China from Early Times to 1949 CE
CEPC Conceptual Design Report: Volume 2 - Physics & Detector
The Circular Electron Positron Collider (CEPC) is a large international scientific facility proposed by the Chinese particle physics community to explore the Higgs boson and provide critical tests of the underlying fundamental physics principles of the Standard Model that might reveal new physics. The CEPC, to be hosted in China in a circular underground tunnel of approximately 100 km in circumference, is designed to operate as a Higgs factory producing electron-positron collisions with a center-of-mass energy of 240 GeV. The collider will also operate at around 91.2 GeV, as a Z factory, and at the WW production threshold (around 160 GeV). The CEPC will produce close to one trillion Z bosons, 100 million W bosons and over one million Higgs bosons. The vast amount of bottom quarks, charm quarks and tau-leptons produced in the decays of the Z bosons also makes the CEPC an effective B-factory and tau-charm factory. The CEPC will have two interaction points where two large detectors will be located. This document is the second volume of the CEPC Conceptual Design Report (CDR). It presents the physics case for the CEPC, describes conceptual designs of possible detectors and their technological options, highlights the expected detector and physics performance, and discusses future plans for detector R&D and physics investigations. The final CEPC detectors will be proposed and built by international collaborations but they are likely to be composed of the detector technologies included in the conceptual designs described in this document. A separate volume, Volume I, recently released, describes the design of the CEPC accelerator complex, its associated civil engineering, and strategic alternative scenarios
CEPC Conceptual Design Report: Volume 2 - Physics & Detector
The Circular Electron Positron Collider (CEPC) is a large international scientific facility proposed by the Chinese particle physics community to explore the Higgs boson and provide critical tests of the underlying fundamental physics principles of the Standard Model that might reveal new physics. The CEPC, to be hosted in China in a circular underground tunnel of approximately 100 km in circumference, is designed to operate as a Higgs factory producing electron-positron collisions with a center-of-mass energy of 240 GeV. The collider will also operate at around 91.2 GeV, as a Z factory, and at the WW production threshold (around 160 GeV). The CEPC will produce close to one trillion Z bosons, 100 million W bosons and over one million Higgs bosons. The vast amount of bottom quarks, charm quarks and tau-leptons produced in the decays of the Z bosons also makes the CEPC an effective B-factory and tau-charm factory. The CEPC will have two interaction points where two large detectors will be located. This document is the second volume of the CEPC Conceptual Design Report (CDR). It presents the physics case for the CEPC, describes conceptual designs of possible detectors and their technological options, highlights the expected detector and physics performance, and discusses future plans for detector R&D and physics investigations. The final CEPC detectors will be proposed and built by international collaborations but they are likely to be composed of the detector technologies included in the conceptual designs described in this document. A separate volume, Volume I, recently released, describes the design of the CEPC accelerator complex, its associated civil engineering, and strategic alternative scenarios
CEPC Conceptual Design Report: Volume 2 - Physics & Detector
The Circular Electron Positron Collider (CEPC) is a large international scientific facility proposed by the Chinese particle physics community to explore the Higgs boson and provide critical tests of the underlying fundamental physics principles of the Standard Model that might reveal new physics. The CEPC, to be hosted in China in a circular underground tunnel of approximately 100 km in circumference, is designed to operate as a Higgs factory producing electron-positron collisions with a center-of-mass energy of 240 GeV. The collider will also operate at around 91.2 GeV, as a Z factory, and at the WW production threshold (around 160 GeV). The CEPC will produce close to one trillion Z bosons, 100 million W bosons and over one million Higgs bosons. The vast amount of bottom quarks, charm quarks and tau-leptons produced in the decays of the Z bosons also makes the CEPC an effective B-factory and tau-charm factory. The CEPC will have two interaction points where two large detectors will be located. This document is the second volume of the CEPC Conceptual Design Report (CDR). It presents the physics case for the CEPC, describes conceptual designs of possible detectors and their technological options, highlights the expected detector and physics performance, and discusses future plans for detector R&D and physics investigations. The final CEPC detectors will be proposed and built by international collaborations but they are likely to be composed of the detector technologies included in the conceptual designs described in this document. A separate volume, Volume I, recently released, describes the design of the CEPC accelerator complex, its associated civil engineering, and strategic alternative scenarios