Parallel flow in Hele-Shaw cells with ferrofluids

Parallel flow in a Hele-Shaw cell occurs when two immiscible liquids flow with relative velocity parallel to the interface between them. The interface is unstable due to a Kelvin-Helmholtz type of instability in which fluid flow couples with inertial effects to cause an initial small perturbation to grow. Large amplitude disturbances form stable solitons. We consider the effects of applied magnetic fields when one of the two fluids is a ferrofluid. The dispersion relation governing mode growth is modified so that the magnetic field can destabilize the interface even in the absence of inertial effects. However, the magnetic field does not affect the speed of wave propagation for a given wavenumber. We note that the magnetic field creates an effective interaction between the solitons.Comment: 12 pages, Revtex, 2 figures, revised version (minor changes

The effects of seed coating treatment on yield and yield components in some cotton (Gossypium hirsitum L.) varieties

The use of delinted cotton seeds in cotton planting instead of fuzzy cotton seeds has spread recently. Cotton planting area of the world was 32,150,000 ha in 2003 - 2004. Approximately 45 - 50% of the planting seed in the world is delinted. This signifies that nearly 16,000,000 ha cotton area is planted by delinted cotton seed. In this study, coating fuzzy cotton seeds is proposed as an alternative to delintation. Coating makes fuzzy cotton seeds more suitable for the pneumatic spacing planter. Also, unlike delintation, sulphuric acid is not used for coating and this eliminates the problems associated with its usage such as seed loss, pollution and threats to human health. The results show that the cultivation of coated cotton seeds has no disadvantage regarding the agronomic and technological characteristics of cotton seed; coating may even improve the characteristics of the seeds. Also, no significant difference exists in terms of yield. Hence, seed coating has the potential to expand organic cultivation of cotton, as the coated seeds can be easily planted with pneumatic spacing drills and as organic seed procurement would be provided with the seed coating method.Keywords: Fuzzy cotton seed, seed coating, yield componentsAfrican Journal of BiotechnologyVol. 9(34), pp. 5523-5529, 23 August, 201

Improving the Spatial Accuracy of UAV Platforms Using Direct Georeferencing Methods: An Application for Steep Slopes

The spatial accuracy of unmanned aerial vehicles (UAVs) and the images they capture play a crucial role in the mapping process. Researchers are exploring solutions that use image-based techniques such as structure from motion (SfM) to produce topographic maps using UAVs while accessing locations with extremely high accuracy and minimal surface measurements. Advancements in technology have enabled real-time kinematic (RTK) to increase positional accuracy to 1–3 times the ground sampling distance (GSD). This paper focuses on post-processing kinematic (PPK) of positional accuracy to achieve a GSD or better. To achieve this, precise satellite orbits, clock information, and UAV global navigation satellite system observation files are utilized to calculate the camera positions with the highest positional accuracy. RTK/PPK analysis is conducted to improve the positional accuracies obtained from different flight patterns and altitudes. Data are collected at altitudes of 80 and 120 meters, resulting in GSD values of 1.87 cm/px and 3.12 cm/px, respectively. The evaluation of ground checkpoints using the proposed PPK methodology with one ground control point demonstrated root mean square error values of 2.3 cm (horizontal, nadiral) and 2.4 cm (vertical, nadiral) at an altitude of 80 m, and 1.4 cm (horizontal, oblique) and 3.2 cm (vertical, terrain-following) at an altitude of 120 m. These results suggest that the proposed methodology can achieve high positional accuracy for UAV image georeferencing. The main contribution of this paper is to evaluate the PPK approach to achieve high positional accuracy with unmanned aerial vehicles and assess the effect of different flight patterns and altitudes on the accuracy of the resulting topographic maps

Incorporation of Y2O3 Particles into 410L Stainless Steel by a Powder Metallurgy Route

Addition of yttria to steels has been proposed for the fabrication of oxide-dispersion-strengthened materials for nuclear power applications. We have investigated materials prepared from 12 Cr martensitic stainless steel, AISI 410L, produced by powder metallurgy. Materials were produced with and without yttria addition, and two different sizes of yttria were used, 0.9 µm and 50 nm. Tensile and mini-creep tests were performed to determine mechanical properties. Optical microscopy, SEM, TEM, and EDX analysis were used to investigate the microstructures and deformation mechanisms and to obtain information about non-metallic inclusion particles. SiO2, MnS, and Y2Si2O7 inclusion particles were observed. An SiO2 and Y2O3 interaction was seen to have occurred during the ball milling, which impaired the final mechanical properties. Small-angle neutron scattering experiments showed that the matrix chemistry prevented effective dissolution of the yttria. © The Author(s) 201

Estimation of stature from the foot and its segments in a sub-adult female population of North India

<p>Abstract</p> <p>Background</p> <p>Establishing personal identity is one of the main concerns in forensic investigations. Estimation of stature forms a basic domain of the investigation process in unknown and co-mingled human remains in forensic anthropology case work. The objective of the present study was to set up standards for estimation of stature from the foot and its segments in a sub-adult female population.</p> <p>Methods</p> <p>The sample for the study constituted 149 young females from the Northern part of India. The participants were aged between 13 and 18 years. Besides stature, seven anthropometric measurements that included length of the foot from each toe (T1, T2, T3, T4, and T5 respectively), foot breadth at ball (BBAL) and foot breadth at heel (BHEL) were measured on both feet in each participant using standard methods and techniques.</p> <p>Results</p> <p>The results indicated that statistically significant differences (p < 0.05) between left and right feet occur in both the foot breadth measurements (BBAL and BHEL). Foot length measurements (T1 to T5 lengths) did not show any statistically significant bilateral asymmetry. The correlation between stature and all the foot measurements was found to be positive and statistically significant (<it>p-value </it>< 0.001). Linear regression models and multiple regression models were derived for estimation of stature from the measurements of the foot. The present study indicates that anthropometric measurements of foot and its segments are valuable in the estimation of stature. Foot length measurements estimate stature with greater accuracy when compared to foot breadth measurements.</p> <p>Conclusions</p> <p>The present study concluded that foot measurements have a strong relationship with stature in the sub-adult female population of North India. Hence, the stature of an individual can be successfully estimated from the foot and its segments using different regression models derived in the study. The regression models derived in the study may be applied successfully for the estimation of stature in sub-adult females, whenever foot remains are brought for forensic examination. Stepwise multiple regression models tend to estimate stature more accurately than linear regression models in female sub-adults.</p

Methylenetetrahydrofolate reductase C677T polymorphism in patients with gastric and colorectal cancer in a Korean population

<p>Abstract</p> <p>Background</p> <p>This study was designed to investigate an association between the methylenetetrahydrofolate reductase (MTHFR) C677T polymorphism and the risk of gastric and colorectal cancer in the Korean population.</p> <p>Methods</p> <p>We conducted a population-based large-scale case-control study involving 2,213 patients with newly diagnosed gastric cancer, 1,829 patients with newly diagnosed colorectal cancer, and 1,700 healthy controls. Genotyping was performed with peripheral blood DNA for MTHFR C677T polymorphisms. The statistical significance was estimated by logistic regression analysis.</p> <p>Results</p> <p>The MTHFR C677T frequencies of CC, CT, and TT genotypes were 35.2%, 47.5%, and 17.3% among stomach cancer, 34%, 50.5%, and 15.5% in colorectal cancer, and 31.8%, 50.7%, and 17.5% in the controls, respectively. The MTHFR 677TT genotype showed a weak opposite association with colorectal cancer compared to the homozygous CC genotype [adjusted age and sex odds ratio (OR) = 0.792, 95% confidence interval (CI) = 0.638-0.984, <it>P </it>= 0.035]. Subjects with the MTHFR 677CT showed a significantly reduced risk of gastric cancer compared whose with the 677CC genotype (age- and sex-adjusted OR = 0.810; 95% CI = 0.696-0.942, <it>P </it>= 0.006). We also observed no significant interactions between the MTHFR C677T polymorphism and smoking or drinking in the risk of gastric and colorectal cancer.</p> <p>Conclusions</p> <p>The T allele was found to provide a weak protective association with gastric cancer and colorectal cancer.</p