58 research outputs found

    Cascade communication in disordered networks of enzyme-loaded microdroplets

    Get PDF
    Regulation of chemical reactivity in reaction cascades is critical to the functioning and survival of living organisms. In nature, an asymmetry in chemical communication is often controlled by compartmentalizing active species, e.g. enzymes, within cells or subcellular organelles. In this work, we describe an artificial droplet network that exhibits programmed and directional communication capable to perform a multistep enzymatic cascade reaction across multiple droplets. More specifically, a non-reciprocal transfer of substrates between enzyme-containing aqueous emulsion droplets is realized by (biochemically) induced osmolarity gradients and concomitant concentration gradients then direct an enzymatic cascade reaction across different droplets. Given the generalizable nature of this approach, we believe the herein developed guidelines can be extended to other enzymes and enzyme-linked assays thereby increasing the specificity in chemotactic signaling cascades

    Janus emulsion solar concentrators as photocatalytic droplet microreactors

    Get PDF
    Efficiently harvesting and conveying photons to photocatalytic reaction centers is one of the great obstacles in photocatalysis. To address this challenge, a new approach is reported that is based on employing biphasic complex emulsions as droplet-based solar concentrators. Specifically, substrates and photocatalysts are compartmentalized into the confined space of Janus emulsion droplets comprised of a hydrocarbon partially encapsulated inside fluorocarbon oil with a large refractive index contrast. Optical confinement of the incident light due to total internal reflection at the concave internal interface of the biphasic emulsion droplets leads to a strong increase of the light intensity inside the reaction medium. In addition, the high gas solubility within the outer fluorocarbon phase promotes oxygen delivery in photocatalytic oxidation reactions. Both effects mutually contribute to a strong performance increase of a series of homogeneous and heterogeneous photocatalytic reactions even under diffuse sunlight conditions

    Crown ether-functionalized complex emulsions as an artificial adaptive material platform

    Get PDF
    Responsive materials capable of autonomously regulating and adapting to molecular recognition-induced chemical events hold great promise in the design of artificial chemo-intelligent life-like soft material platforms. In this context, the design of a synthetically minimal artificial emulsion platform that, regulated by interfacial supramolecular recognition events, is capable to autonomously and reversibly adapt to its chemical environment is reported. The systems exhibit programmed up- and down-regulating capabilities that are realized via selective assembly of synthesized crown ether surfactants onto one hemisphere of anisotropic biphasic emulsion droplets. Dynamic and reversible interfacial host–guest complexation of, for example, metal and ammonium ions or amino acids transduce into interface-triggered morphological reconfigurations of the complex emulsion droplets, which mediate their ability to selectively present, hide, or expand liquid–liquid interfaces. The separate responsive modalities are then used to showcase the utility of such adaptive soft material platforms for a self-regulated uptake and release of metal ions or phase-transfer catalysts, a biomimetic recognition of biomolecules including amino acids, carbohydrates, and antibodies, and for triggered surface-encoded payload release applications

    Reversible morphology-resolved chemotactic actuation and motion of Janus emulsion droplets

    Get PDF
    We report, for the first time, a chemotactic motion of emulsion droplets that can be controllably and reversibly altered. Our approach is based on using biphasic Janus emulsion droplets, where each phase responds differently to chemically induced interfacial tension gradients. By permanently breaking the symmetry of the droplets’ geometry and composition, externally evoked gradients in surfactant concentration or effectiveness induce anisotropic Marangoni-type fluid flows adjacent to each of the two different exposed interfaces. Regulation of the competitive fluid convections then enables a controllable alteration of the speed and the direction of the droplets’ chemotactic motion. Our findings provide insight into how compositional anisotropy can affect the chemotactic behavior of purely liquid-based microswimmers. This has implications for the design of smart and adaptive soft microrobots that can autonomously regulate their response to changes in their chemical environment by chemotactically moving towards or away from a certain target, such as a bacterium.<br

    Synthesis of polymer Janus particles with tunable wettability profiles as potent solid surfactants to promote gas delivery in aqueous reaction media

    Get PDF
    Janus particles exhibit a strong tendency to directionally assemble and segregate to interfaces and thus offer advantages as colloidal analogues of molecular surfactants to improve the stability of multiphasic mixtures. Investigation and application of the unique adsorption properties require synthetic procedures that enable careful design and reliable control over the particles’ asymmetric chemistry and wettability profiles with high morphological uniformity across a sample. Herein, we report on a novel one-step synthetic approach for the generation of amphiphilic polymer Janus particles with highly uniform and tunable wettability contrasts, which is based on using reconfigurable bi-phasic Janus emulsions as versatile particle scaffolds. Two phase-separated acrylate oils were used as the constituent droplet phases and transformed into their solidified Janus particle replicas via UV-induced radical polymerization. Using Janus emulsions as particle precursors offers the advantage that their internal droplet geometry can be fine-tuned by changing the force balance of surface tensions acting at the individual interfaces via surfactants or the volume ratio of the constituent phases. In addition, preassembled functional surfactants at the droplet interfaces can be locked in position upon polymerization, which enables both access toward postfunctionalization reaction schemes and the generation of highly uniform Janus particles with adjustable wettability profiles. Depending on the particle morphology and wettability, their interfacial position can be adjusted, which allows us to stabilize either air bubbles-in-water or water droplets-in-air (liquid marbles). Motivated by the interfacial activity of the particles and particularly the longevity of the resulting particle-stabilized air-in-water bubbles, we explored their ability to promote the delivery of oxygen inside a liquid-phase reaction medium, namely, for the heterogeneous Au-NP-mediated catalytic oxidation of d-glucose. We observed a 2.2-fold increase in the reaction rate attributed to the increase of the local concentration of oxygen around catalysts, thus showcasing a new strategy to overcome the limited solubility of gases in aqueous reaction media

    Pattern Formation in Catalytic H<sub>2</sub> Oxidation on Rh: Zooming in by Correlative Microscopy

    Get PDF
    Spatio-temporal nonuniformities in H2 oxidation on individual Rh(h k l) domains of a polycrystalline Rh foil were studied in the 10–6 mbar pressure range by photoemission electron microscopy (PEEM), X-ray photoemission electron microscopy (XPEEM), and low-energy electron microscopy (LEEM). The latter two were used for in situ correlative microscopy to zoom in with significantly higher lateral resolution, allowing detection of an unusual island-mediated oxygen front propagation during kinetic transitions. The origin of the island-mediated front propagation was rationalized by model calculations based on a hybrid approach of microkinetic modeling and Monte Carlo simulations

    Coexisting multi-states in catalytic hydrogen oxidation on rhodium

    Get PDF
    Catalytic hydrogen oxidation on a polycrystalline rhodium foil used as a surface structure library is studied by scanning photoelectron microscopy (SPEM) in the 10−6 mbar pressure range, yielding spatially resolved X-ray photoemission spectroscopy (XPS) measurements. Here we report an observation of a previously unknown coexistence of four different states on adjacent differently oriented domains of the same Rh sample at the exactly same conditions. A catalytically active steady state, a catalytically inactive steady state and multifrequential oscillating states are simultaneously observed. Our results thus demonstrate the general possibility of multi-states in a catalytic reaction. This highly unusual behaviour is explained on the basis of peculiarities of the formation and depletion of subsurface oxygen on differently structured Rh surfaces. The experimental findings are supported by mean-field micro-kinetic modelling. The present observations raise the interdisciplinary question of how self-organising dynamic processes in a heterogeneous system are influenced by the permeability of the borders confining the adjacent regions

    Metacarpal trabecular bone varies with distinct hand-positions used in hominid locomotion

    Get PDF
    Trabecular bone remodels during life in response to loading and thus should, at least in part, reflect potential variation in the magnitude, frequency and direction of joint loading across different hominid species. Here we analyse the trabecular structure across all non-pollical metacarpal distal heads (Mc2-5) in extant great apes, expanding on previous volume of interest and whole-epiphysis analyses that have largely focussed on only the first or third metacarpal. Specifically, we employ both a univariate statistical mapping and a multivariate approach to test for both inter-ray and interspecific differences in relative trabecular bone volume fraction (RBV/TV) and degree of anisotropy (DA) in Mc2-5 subchondral trabecular bone. Results demonstrate that while DA values only separate Pongo from African apes (Pan troglodytes, Pan paniscus, Gorilla gorilla), RBV/TV distribution varies with the predicted loading of the metacarpophalangeal (McP) joints during locomotor behaviours in each species. Gorilla exhibits a relatively dorsal distribution of RBV/TV consistent with habitual hyper-extension of the McP joints during knuckle-walking, whereas Pongo has a palmar distribution consistent with flexed McP joints used to grasp arboreal substrates. Both Pan species possess a disto-dorsal distribution of RBV/TV, compatible with multiple hand postures associated with a more varied locomotor regime. Further inter-ray comparisons reveal RBV/TV patterns consistent with varied knuckle-walking postures in Pan species in contrast to higher RBV/TV values toward the midline of the hand in Mc2 and Mc5 of Gorilla, consistent with habitual palm-back knuckle-walking. These patterns of trabecular bone distribution and structure reflect different behavioural signals that could be useful for determining the behaviours of fossil hominins

    Inverse remodelling algorithm identifies habitual manual activities of primates based on metacarpal bone architecture

    Get PDF
    Previously, a micro-finite element (micro-FE)-based inverse remodelling method was presented in the literature that reconstructs the loading history of a bone based on its architecture alone. Despite promising preliminary results, it remains unclear whether this method is sensitive enough to detect differences of bone loading related to pathologies or habitual activities. The goal of this study was to test the sensitivity of the inverse remodelling method by predicting joint loading histories of metacarpal bones of species with similar anatomy but clearly distinct habitual hand use. Three groups of habitual hand use were defined using the most representative primate species: manipulation (human), suspensory locomotion (orangutan), and knuckle-walking locomotion (bonobo, chimpanzee, gorilla). Nine to ten micro-computed tomography scans of each species ( n=48 in total) were used to create micro-FE models of the metacarpal head region. The most probable joint loading history was predicted by optimally scaling six load cases representing joint postures ranging from −75∘ (extension) to +75∘ (flexion). Predicted mean joint load directions were significantly different between knuckle-walking and non-knuckle-walking groups ( p<0.05 ) and in line with expected primary hand postures. Mean joint load magnitudes tended to be larger in species using their hands for locomotion compared to species using them for manipulation. In conclusion, this study shows that the micro-FE-based inverse remodelling method is sensitive enough to detect differences of joint loading related to habitual manual activities of primates and might, therefore, be useful for palaeoanthropologists to reconstruct the behaviour of extinct species and for biomedical applications such as detecting pathological joint loading

    Reaction update : a McMurry coupling with silicon

    No full text
    • 

    corecore