27 research outputs found
Perovskite-Based Mesostructures and Related Composites — Influence Exerted by Morphology and Interface
The present work seeks to report about the properties of lead-free NaNbO3 particles with different morphology (cubic-like and fiber-like particles) and their application in composites with poly(vinylidenefluoride) (PVDF) polymer. The composites are obtained using a range of varying volume fractions of NaNbO3 particles (30%, 40%, 50% and 60%). The best conditions for obtaining the NaNbO3 particles as well as the composites have been thoroughly studied. It was observed that the highest volume fraction of NaNbO3 particles undermined the flexibility of the composites. The transition percolation phenomenon, commonly known as percolation threshold, was calculated as a function of the dielectric constant and conductivity of the composite. The composites exhibit piezoelectric and ferroelectric properties and both are found to improve by anisotropy of the NaNbO3 particles
Influence of Dopants, Temperature and Atmosphere of Sintered on the Microstructure and Behavior of Lead Free Ceramics
New Approaches to Preparation of SnO2-Based Varistors — Chemical Synthesis, Dopants, and Microwave Sintering
Tin oxides have applications such as sensors, solar cells, transistors, and varistors, which are being studied to replace ZnO varistors due to similar electrical properties, simpler microstructure, no formation of secondary phases, and lower concentration of agent modifiers to promote the varistor characteristics and densification. Varistors are ceramic with a high concentration of structural and electronics defects. The type and the amount of defects are related with agent modifiers and processing steps employed. The study in materials processing aims to improve the ceramics properties. Chemical synthesis ensures the homogeneous distribution of dopants used to promote electrical and structural properties. Microwave sintering appears as processing to optimize time and sintering temperature. Varistor application is linked to its breakdown voltage, which should be larger than the operating voltage. In an operating range of 1 kV to 1 MV, the varistors are used in electricity transmission networks. In a range of 24–1000 V, the application occurs in electronics and appliances and in a range smaller than 24 V, as protective of automotive electronics and computers. This chapter aims to provide information on new processing steps for the production of SnO2 varistors and to show the possibility to get electrical properties with non-ohmic characteristic for technological applications
Direct preparation of standard functional interfaces in oxide heterostructures for 2DEG analysis through beam-induced platinum contacts
Two-dimensional electron gas (2DEG) in SrTiO3/LaAlO3 heterostructures has been extensively studied in the last few years; however, little attention has been given to a practical way to contact electrically the low dimensional gas at the interface. This work demonstrates a method to contact the 2DEG formed at the oxide interfaces connected by platinum electrodes which were made by the decomposition of organometallic gas using focused ion beams. On the surface, the electrodes were defined through photolithography, and at the interface, the electrodes were deposited through the focused ion beams and electrons, which were then evaluated. The quality of the interface electrodes was evaluated at two different partial oxygen pressures (pO2) used for the film deposition: low (10−4 mbar) and high (10−1 mbar). The electrode deposition conditions using electrons or ions have resulted in different rates of metal deposition and interaction with the interface leading to either metallic (2DEG) or insulating behavior
Porous plasmonic nanostructures for Surface Enhanced Raman Scattering: development of biosensing platforms
Synthesis of KNbO3 nanostructures by a microwave assisted hydrothermal method
One-dimensional nanostructures of KNbO3 have attracted a great interest in the scientific community, mainly because of their promising application as nanoelectromechanical systems (NEMS). However, the synthesis of KNbO3 structures becomes complex due to the natural tendency to form non-stoichiometric potassium niobates. In this context, we report on the crystallization of one-dimensional KNbO3 nanostructures through the reaction between Nb2O5 and KOH under microwave-assisted hydrothermal synthesis (M-H). The use of this synthesis method made possible a very fast synthesis of singlecrystalline powders. Based on SEM, TEM and XRD characterizations, the influence of the synthesis time and the reactants concentration in the structure and morphology of the resultant KNbO3 was established. The conditions that favor the crystallization of nanofingers were determined to be small amounts of Nb2O5 and short reaction times.Fil: Paula, Amauri J.. Universidade de Sao Paulo; BrasilFil: Parra, Rodrigo. Consejo Nacional de Investigaciones CientÃficas y Técnicas. Centro CientÃfico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y TecnologÃa de Materiales. Universidad Nacional de Mar del Plata. Facultad de IngenierÃa. Instituto de Investigaciones en Ciencia y TecnologÃa de Materiales; ArgentinaFil: Zaghete, Maria A.. Universidade de Sao Paulo; BrasilFil: Varela, José A.. Universidade de Sao Paulo; Brasi
Study on the K3Li2Nb5O15 formation during the production of (Na0.5K0.5)((1-x))LixNbO3 lead-free piezoceramics at the morphotropic phase boundary
Because of the environmental concerns, the manufacture of ceramics based on lead titanate zirconate [Pb(Zr1-xTix)O-3 - PZT] has been condemned because of the lead toxicity. In this context, the electromechanical properties of sodium, potassium and lithium niobate [(Na-0.5-x/2K0.5-x/2Lix)NbO3 - NKLN] at the morphotropic phase boundary granted these materials the position of most suitable candidate to replace PZT. However, the production of these ceramics is rather critical mainly because of a natural tendency of forming secondary phases. To help with the studies of the synthesis of this lead-free piezoceramic, this work presents an evaluation of the crystallization of the (Na0.47K0.47Li0.06)NbO3 phase by solid-state reactions. TG-DTA, XRD, dilatometric and ferroelectric hysteresis analyses indicated that a secondary phase (K3Li2Nb5O15) crystallizes at temperatures above 850 degrees C and also during the sintering of the powders compacts at 1080 degrees C. To prevent the formation of this phase, the addition of Na2Nb2O6 center dot nH(2)O microfibers obtained through a microwave hydrothermal synthesis was performed in the sintering process. After to this addition, the suppression of the K3Li2Nb5O15 phase occurred and an increase of the NKLN electrical properties was then obtained. (C) 2009 Elsevier Ltd. All rights reserved.Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP
Microwave-assisted hydrothermal synthesis of structurally and morphologically controlled sodium niobates by using niobic acid as a precursor
There are many advantages to using a microwave as a source of heat in hydrothermal reactions. Because it is a quick and homogeneous way to crystallize ceramic powders, it was used in this work for the production of antiferroelectric sodium mobate (NaNbO3) in a cubic-like form and its intermediary phase, disodium diniobate hydrate (Na2Nb2O6 center dot H2O), with a fiber morphology. The syntheses were carried out by treating niobic acid (Nb2O5 center dot nH(2)O) with NaOH. By changing the reaction time and the concentration of the reactants, particles with different structures and different morphologies could be obtained. The structural evolution of the products of this reaction was elucidated on the basis of the arrangement of the NbO6 octahedral units. Conclusive results were obtained with morphological and structural characterizations through XRD, TEM, MEV, and NMR and Raman spectroscopy. ((C) Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2008)
Effect of lithium additive on the microstructure and electrical responses of 0.9PMN-0.1PT ceramics
Structural effects of lithium additive on 0.9PMN-0.1PT powders prepared by Ti-modified columbite route were studied. The substitution of Li+ ions for Mg2+ ions in the B-site sub-lattice of 0.9PMN-0.1PT perovskite structure was explained in terms of lead and oxygen vacancies generation originated as consequence of the ionic compensation of negatively charged Li'(Mg) sites. The rise in mass transport as consequence of the increasing of Pb2+ and O2- vacancies produces more agglomerated particles during the powder synthesis and changes the mechanical characteristics between grain and grain boundary of sintered ceramic. The relation between K-m and T-m values, the difference between ionic radii of B cation and the molar volume were used to explain the changes in the relaxor behavior and diffusiveness of phase transition as function of lithium doping, which are corroborated by the results obtained through the ferroelectric characterization
A novel synthesis of perovskite bismuth ferrite nanoparticles
Microwave assisted hydrothermal (MAH) method was used to synthesize crystalline bismuth ferrite (BiFeO3) nanoparticles (BFO) at temperature of 180°C with times ranging from 5 min to 1 h. For comparison, BFO powders were also crystallized by the soft chemistry route in a conventional furnace at a temperature of 850°C for 4 h. X-ray diffraction (XRD) results verified the formation of perovskite BFO crystallites while infrared data showed no traces of carbonate. Field emission scanning microcopy (FE/SEM) revealed a homogeneous size distribution of nanometric BFO powders. MAH method produced nanoparticles of 96% pure perovskite, with a size of 130 nm. These results are in agreement with Raman scattering values which show that the MAH synthesis route is rapid and cost effective. This method could be used as an alternative to other chemical methods in order to obtain BFO nanoparticles