Management of Extracranial Carotid Artery Aneurysms:17 Years» Experience

AbstractObjectives:a retrospective review of seventeen-year (1980–1996) experience of the management of extracranial carotid artery aneurysms.Patients and methods:sixty-six aneurysms of extracranial carotid artery were seen in 63 patients. The diagnosis was confirmed by angiography in 51 patients and duplex ultrasonography in twelve. Twenty-eight (42%) patients had an atherosclerotic aneurysm, twenty-two (33%) had false aneurysms secondary to trauma, nine were congenital and seven were mycotic. All underwent aneurysm resection with saphenous-vein-graft interposition as the most common means of reconstruction.Results:one death occurred due to septicaemia in a diabetic patient with a mycotic aneurysm, giving an operative mortality of 1.5%. One patient had an immediate hemiparesis after carotid artery ligation, and three had a hemiparesis within 48 hours of operation (6.1%). After a change in technique to avoid a residual carotid stump, no further neurological problems were encountered in the following 28 patients.Conclusion:extracranial carotid aneurysms may be successfully managed with resection and reconstruction with autogenous saphenous vein. End-to-side anastomosis avoids a blind-ending stump which may be the source of emboli

Analysis of Kif5b Expression during Mouse Kidney Development

published_or_final_versio

Selective Synthesis of Fe2O3 and Fe3O4 Nanowires Via a Single Precursor: A General Method for Metal Oxide Nanowires

Hematite (α-Fe2O3) and magnetite (Fe3O4) nanowires with the diameter of about 100 nm and the length of tens of micrometers have been selectively synthesized by a microemulsion-based method in combination of the calcinations under different atmosphere. The effects of the precursors, annealing temperature, and atmosphere on the morphology and the structure of the products have been investigated. Moreover, Co3O4 nanowires have been fabricated to confirm the versatility of the method for metal oxide nanowires

Synthesis of Tapered CdS Nanobelts and CdSe Nanowires with Good Optical Property by Hydrogen-Assisted Thermal Evaporation

The tapered CdS nanobelts and CdSe nanowires were prepared by hydrogen-assisted thermal evaporation method. Different supersaturation leads to two different kinds of 1D nanostructures. The PL measurements recorded from the as-prepared tapered CdS nanobelts and CdSe nanowires show only a bandgap emission with relatively narrow full-width half maximum, which means that they possess good optical property. The as-synthesized high-quality tapered CdS nanobelts and CdSe nanowires may be excellent building blocks for photonic devices

Influence of helium-ion bombardment on the optical properties of ZnO nanorods/p-GaN light-emitting diodes

Light-emitting diodes (LEDs) based on zinc oxide (ZnO) nanorods grown by vapor-liquid-solid catalytic growth method were irradiated with 2-MeV helium (He+) ions. The fabricated LEDs were irradiated with fluencies of approximately 2 × 1013 ions/cm2 and approximately 4 × 1013 ions/cm2. Scanning electron microscopy images showed that the morphology of the irradiated samples is not changed. The as-grown and He+-irradiated LEDs showed rectifying behavior with the same I-V characteristics. Photoluminescence (PL) measurements showed that there is a blue shift of approximately 0.0347 and 0.082 eV in the near-band emission (free exciton) and green emission of the irradiated ZnO nanorods, respectively. It was also observed that the PL intensity of the near-band emission was decreased after irradiation of the samples. The electroluminescence (EL) measurements of the fabricated LEDs showed that there is a blue shift of 0.125 eV in the broad green emission after irradiation and the EL intensity of violet emission approximately centered at 398 nm nearly disappeared after irradiations. The color-rendering properties show a small decrease in the color-rendering indices of 3% after 2 MeV He+ ions irradiation

Estimation of HIV-1 incidence among five focal populations in Dehong, Yunnan: a hard hit area along a major drug trafficking route

<p>Abstract</p> <p>Background</p> <p>Since 1989 when the first 146 HIV positives in China were identified, Dehong Prefecture had been one of the areas hardest-hit by HIV in China. The local and national governments have put substantial financial resources into tackling the HIV epidemic in Dehong from 2004. The objective of this study was to track dynamic changes in HIV-1 prevalence and incidence among five focal populations in Dehong and to assess the impact of HIV prevention and control efforts.</p> <p>Methods</p> <p>Consecutive cross-sectional surveys conducted in five focal populations between 2004 and 2008. Specimens seropositive for HIV were tested with the BED IgG capture enzyme immunoassay to identify recent seroconversions (median, 155 days) using normalized optical density of 0.8 and adjustments.</p> <p>Results</p> <p>From 2004 to 2008, estimated annual HIV incidence among injecting drug users (IDUs) decreased significantly [from 15.0% (95% CI = 11.4%-18.5%) in 2004 to 4.3% (95% CI = 2.4%-6.2%) in 2008; trend test P < 0.0001]. The incidence among other focal populations, such as HIV discordant couples (varying from 5.5% to 4.7%), female sex workers (varying from 1.4% to 1.3%), pregnant women (0.1%), and pre-marital couples (0.2 to 0.1%) remained stable. Overall, the proportion of recent HIV-1 infections was higher among females than males (P < 0.0001).</p> <p>Conclusions</p> <p>The HIV epidemic in Dehong continued to expand during a five-year period but at a slowing rate among IDUs, and HIV incidence remains high among IDUs and discordant couples. Intensive prevention measures should target sub-groups at highest risk to further slow the epidemic and control the migration of HIV to other areas of China, and multivariate analysis is needed to explore which measures are more effective for different populations.</p

SnO2Nanowire Arrays and Electrical Properties Synthesized by Fast Heating a Mixture of SnO2and CNTs Waste Soot

SnO2nanowire arrays were synthesized by fast heating a mixture of SnO2and the carbon nanotubes waste soot by high-frequency induction heating. The resultant SnO2nanowires possess diameters from 50 to 100 nm and lengths up to tens of mircrometers. The field-effect transistors based on single SnO2nanowire exhibit that as-synthesized nanowires have better transistor performance in terms of transconductance and on/off ratio. This work demonstrates a simple technique to the growth of nanomaterials for application in future nanoelectronic devices

Sp1 Is Essential for p16(INK4a) Expression in Human Diploid Fibroblasts during Senescence

BACKGROUND: p16 (INK4a) tumor suppressor protein has been widely proposed to mediate entrance of the cells into the senescent stage. Promoter of p16 (INK4a) gene contains at least five putative GC boxes, named GC-I to V, respectively. Our previous data showed that a potential Sp1 binding site, within the promoter region from −466 to −451, acts as a positive transcription regulatory element. These results led us to examine how Sp1 and/or Sp3 act on these GC boxes during aging in cultured human diploid fibroblasts. METHODOLOGY/PRINCIPAL FINDINGS: Mutagenesis studies revealed that GC-I, II and IV, especially GC-II, are essential for p16 (INK4a) gene expression in senescent cells. Electrophoretic mobility shift assays (EMSA) and ChIP assays demonstrated that both Sp1 and Sp3 bind to these elements and the binding activity is enhanced in senescent cells. Ectopic overexpression of Sp1, but not Sp3, induced the transcription of p16 (INK4a). Both Sp1 RNAi and Mithramycin, a DNA intercalating agent that interferes with Sp1 and Sp3 binding activities, reduced p16 (INK4a) gene expression. In addition, the enhanced binding of Sp1 to p16 (INK4a) promoter during cellular senescence appeared to be the result of increased Sp1 binding affinity, not an alteration in Sp1 protein level. CONCLUSIONS/SIGNIFICANCE: All these results suggest that GC- II is the key site for Sp1 binding and increase of Sp1 binding activity rather than protein levels contributes to the induction of p16 (INK4a) expression during cell aging

The Energy Computation Paradox and ab initio Protein Folding

The routine prediction of three-dimensional protein structure from sequence remains a challenge in computational biochemistry. It has been intuited that calculated energies from physics-based scoring functions are able to distinguish native from nonnative folds based on previous performance with small proteins and that conformational sampling is the fundamental bottleneck to successful folding. We demonstrate that as protein size increases, errors in the computed energies become a significant problem. We show, by using error probability density functions, that physics-based scores contain significant systematic and random errors relative to accurate reference energies. These errors propagate throughout an entire protein and distort its energy landscape to such an extent that modern scoring functions should have little chance of success in finding the free energy minima of large proteins. Nonetheless, by understanding errors in physics-based score functions, they can be reduced in a post-hoc manner, improving accuracy in energy computation and fold discrimination