408 research outputs found
Comparison of Halbach magnetized brushless machines based on discrete magnet segments or a single ring magnet
This paper compares the air-gap field distribution, cogging torque, back-electromotive-force waveform, and efficiency of brushless machines having a Halbach magnetization produced by either discrete magnet segments or a single ring magnet. Results deduced from finite-element analyses are compared with measurements, and the performance of Halbach magnetized machines is compared with that of machines equipped with radially magnetized magnets
Analytical magnetic field analysis of Halhach magnetized permanent-magnet machines
We develop analytical models for predicting the magnetic field distribution in Halbach magnetized machines. They are formulated in polar coordinates and account for the relative recoil permeability of the magnets. They are applicable to both internal and external rotor permanent-magnet machines with either an iron-cored or air-cored stator and/or rotor. We compare predicted results with those obtained by finite-element analyses and measurements. We show that the air-gap flux density varies significantly with the pole number and that an optimal combination of the magnet thickness and the pole number exists for maximum air-gap flux density, while the back iron can enhance the air-gap field and electromagnetic torque when the radial thickness of the magnet is small
Three-phase modular permanent magnet brushless machine for torque boosting on a downsized ICE vehicle
The paper describes a relatively new topology of 3-phase permanent magnet (PM) brushless machine, which offers a number of significant advantages over conventional PM brushless machines for automotive applications, such as electrical torque boosting at low engine speeds for vehicles equipped with downsized internal combustion engine (ICEs). The relative merits of feasible slot/pole number combinations for the proposed 3-phase modular PM brushless ac machine are discussed, and an analytical method for establishing the open-circuit and armature reaction magnetic field distributions when such a machine is equipped with a surface-mounted magnet rotor is presented. The results allow the prediction of the torque, the phase emf, and the self- and mutual winding inductances in closed forms, and provide a basis for comparative studies, design optimization and machine dynamic modeling. However, a more robust machine, in terms of improved containment of the magnets, results when the magnets are buried inside the rotor, which, since it introduces a reluctance torque, also serves to reduce the back-emf, the iron loss and the inverter voltage rating. The performance of a modular PM brushless machine equipped with an interior magnet rotor is demonstrated by measurements on a 22-pole/24-slot prototype torque boosting machine
Powder alignment system for anisotropic bonded NdFeB Halbach cylinders
A Halbach cylinder, fabricated from pre-magnetized sintered NdFeB magnet segments, is proposed for the powder aligning system during the compression or injection moulding of anisotropic bonded Halbach oriented NdFeB ring magnets. The influence of leading design parameters of the powder aligning system, viz. the number of magnet segments per pole, their axial length and radial thickness, and their clearance from the mould, is investigated by finite element analysis, and validated experimentall
Analysis of anisotropic bonded NdFeB Halbach cylinders accounting for partial powder alignment
An analytical technique is developed for predicting the performance of a bonded Halbach oriented anisotropic magnet, with due account of partial alignment of the NdFeB powder during injection molding. The predicted performance of a 12-pole injection molded, Halbach oriented magnet is compared with measuremen
Rotor eddy-current loss in permanent magnet brushless machines
This paper presents an analysis of the rotor eddy-current loss in modular and conventional topologies of permanent magnet brushless machine. The loss is evaluated both analytically and by time-stepped finite-element analysis, and it is shown that it can be significant in both machine topologies. It is also shown that the loss can be reduced significantly by segmenting the magnets
Performance of Halbach magnetized brushless AC motors
The steady-state performance of Halbach magnetized brushless ac machines when operated in constant torque and flux-weakening modes is investigated both theoretically and experimentally, with particular emphasis on the influence of cross-coupling magnetic saturation on the torque capability
Partial wave analysis of J/\psi \to \gamma \phi \phi
Using events collected in the BESII detector, the
radiative decay is
studied. The invariant mass distribution exhibits a near-threshold
enhancement that peaks around 2.24 GeV/.
A partial wave analysis shows that the structure is dominated by a
state () with a mass of
GeV/ and a width of GeV/. The
product branching fraction is: .Comment: 11 pages, 4 figures. corrected proof for journa
Measurements of the observed cross sections for exclusive light hadrons containing at , 3.650 and 3.6648 GeV
By analyzing the data sets of 17.3, 6.5 and 1.0 pb taken,
respectively, at , 3.650 and 3.6648 GeV with the BES-II
detector at the BEPC collider, we measure the observed cross sections for
, , ,
and at the three energy
points. Based on these cross sections we set the upper limits on the observed
cross sections and the branching fractions for decay into these
final states at 90% C.L..Comment: 7 pages, 2 figure
Measurements of the observed cross sections for exclusive light hadron production in e^+e^- annihilation at \sqrt{s}= 3.773 and 3.650 GeV
By analyzing the data sets of 17.3 pb taken at GeV
and 6.5 pb taken at GeV with the BESII detector at the
BEPC collider, we have measured the observed cross sections for 12 exclusive
light hadron final states produced in annihilation at the two energy
points. We have also set the upper limits on the observed cross sections and
the branching fractions for decay to these final states at 90%
C.L.Comment: 8 pages, 5 figur
- …