Dust events in Beijing, China (2004–2006): Comparison of ground-based measurements with columnar integrated observations

Ambient particle number size distributions spanning three years were used to characterize the frequency and intensity of atmospheric dust events in the urban areas of Beijing, China in combination with AERONET sun/sky radiometer data. Dust events were classified into two types based on the differences in particle number and volume size distributions and local weather conditions. This categorization was confirmed by aerosol index images, columnar aerosol optical properties, and vertical potential temperature profiles. During the type-1 events, dust particles dominated the total particle volume concentration (4 m s−1). The type-2 events occurred in rather stagnant air masses and were characterized by a lower volume fraction of coarse mode particles (on average, 55%). Columnar optical properties showed that the superposition of dust and anthropogenic aerosols in type-2 events resulted in a much higher AOD (average: 1.51) than for the rather pure dust aerosols in type-1 events (average AOD: 0.36). A discrepancy was found between the ground-based and column integrated particle volume size distributions, especially for the coarse mode particles. This discrepancy likely originates from both the limited comparability of particle volume size distributions derived from Sun photometer and in situ number size distributions, and the inhomogeneous vertical distribution of particles during dust events

Study of f_0(980) and f_0(1500) from B_s \to f_0(980)\pi, f_0(1500)\pi Decays

In this paper, we analyze the scalar mesons $f_0(980)$ and $f_0(1500)$ from the decays $\bar B^0_s \to f_0(980)\pi^0, f_0(1500)\pi^0$ within Perturbative QCD approach. From the leading order calculations, we find that (a) in the allowed mixing angle ranges, the branching ratio of $\bar B^0_s\to f_0(980)\pi^0$ is about $(1.0\sim1.6)\times 10^{-7}$, which is smaller than that of $\bar B^0_s\to f_0(980)K^0$ (the difference is a few times even one order); (b) the decay $\bar B^0_s \to f_0(1500)\pi^0$ is better to distinguish between the lowest lying state or the first excited state for $f_0(1500)$, because the branching ratios for two scenarios have about one-order difference in most of the mixing angle ranges; and (c) the direct CP asymmetries of $\bar B^0_s \to f_0(1500)\pi^0$ for two scenarios also exists great difference. In scenario II, the variation range of the value ${\cal A} ^{dir}_{CP}(\bar B^0_s \to f_0(1500)\pi^0)$ according to the mixing angle is very small, except for the values corresponding to the mixing angles being near $90^\circ$ or $270^\circ$, while the variation range of ${\cal A} ^{dir}_{CP}(\bar B^0_s \to f_0(1500)\pi^0)$ in scenario I is very large. Compared with the future data for the decay $\bar B^0_s \to f_0(1500)\pi^0$, it is ease to determine the nature of the scalar meson $f_0(1500)$.Comment: 16 pages, 3 figures, Revte

Characteristics of regional new particle formation in urban and regional background environments in the North China Plain

Long-term measurements of particle number size distributions were carried out both at an urban background site (Peking University, PKU) and a regional Global Atmospheric Watch station (Shangdianzi, SDZ) from March to November in 2008. In total, 52 new particle formation (NPF) events were observed simultaneously at both sites, indicating that this is a regional phenomenon in the North China Plain. On average, the mean condensation sink value before the nucleation events started was 0.025 s−1 in the urban environment, which was 1.6 times higher than that at regional site. However, higher particle formation and growth rates were observed at PKU (10.8 cm−3 s−1 and 5.2 nm h−1) compared with those at SDZ (4.9 cm−3 s−1 and 4.0 nm h−1). These results implied that precursors were much more abundant in the polluted urban environment. Different from the observations in cleaner environments, the background conditions of the observed particle homogeneous nucleation events in the North China Plain could be characterized as the co-existing of a stronger source of precursor gases and a higher condensational sink of pre-existing aerosol particles. Secondary aerosol formation following nucleation events results in an increase of particle mass concentration, particle light scattering coefficient, and cloud condensation nuclei (CCN) number concentration, with consequences on visibility, radiative effects, and air quality. Typical regional NPF events with significant particle nucleation rates and subsequent particle growth over a sufficiently long time period at both sites were chosen to investigate the influence of NPF on the number concentration of "potential" CCN. As a result, the NPF and the subsequent condensable growth increased the CCN number concentration in the North China Plain by factors in the range from 5.6 to 8.7. Moreover, the potential contribution of anthropogenic emissions to the CCN number concentration was more than 50%, to which more attention should be drawn in regional and global climate modeling, especially in the polluted urban areas

Charmless hadronic decays B→PP,PV,VVB \to PP, PV, VV and new physics effects in the general two-Higgs doublet models

Based on the low-energy effective Hamiltonian with the generalized factorization, we calculate the new physics contributions to the branching ratios of the two-body charmless hadronic decays of $B_u$ and $B_d$ mesons induced by the new gluonic and electroweak charged-Higgs penguin diagrams in the general two-Higgs doublet models (models I, II and III). Within the considered parameter space, we find that: (a) the new physics effects from new gluonic penguin diagrams strongly dominate over those from the new $\gamma$- and $Z^0$- penguin diagrams; (b) in models I and II, new physics contributions to most studied B meson decay channels are rather small in size: from -15% to 20%; (c) in model III, however, the new physics enhancements to the penguin-dominated decay modes can be significant, $\sim (30 -200)$, and therefore are measurable in forthcoming high precision B experiments; (d) the new physics enhancements to ratios {\cal B}(B \to K \etap) are significant in model III, $\sim (35 -70)$, and hence provide a simple and plausible new physics interpretation for the observed unexpectedly large B \to K \etap decay rates; (e) the theoretical predictions for ${\cal B}(B \to K^+ \pi)$ and ${\cal B}(B \to K^0 \pi^+)$ in model III are still consistent with the data within $2\sigma$ errors; (f) the significant new physics enhancements to the branching ratios of $B \to K^0 \pi^0, K^* \eta, K^{*+} \pi^-, K^+ \phi, K^{*0} \omega, K^{*+} \phi$ and $K^{*0} \phi$ decays are helpful to improve the agreement between the data and the theoretical predictions; (g) the theoretical predictions of ${\cal B}(B \to PP, PV, VV)$ in the 2HDM's are generally consistent with experimental measurements and upper limits ($90$)Comment: 55 pages, Latex file, 17 PS and EPS figures. With minor corrections, final version to be published in Phys.Rev. D. Repot-no: PKU-TH-2000-4

Studies of Static and Dynamic Characteristics of the EDM Machine Based on the ANSYS Workbench

The static and dynamic characteristics of the EDM machine as the main machining unit directlyinfluence the machining accuracy and stability. For a particular type of the EDM machine, the three-dimensional model was built with SolidWorks and the finite element method was employed with the ANSYS Workbench to analyze the static and dynamic characteristics of the machine. The results show that the stiffness of the ram and vertical guide (Z-axis) in the Y and Z directions is the weak side of the machine. The analytical method is proved to be effective for the optimization of the machine design.Установлено, что точность и стабильность обработки зависят от статических и динамических характеристик электроэрозионного станка как основного станочного модуля. Для электроэрозионного станка определенного типа с помощью программного комплекса SolidWorks была построена трехмерная модель, а для анализа его статических и динамических характеристик использовали метод конечных элементов в комбинации с программным комплексом ANSYS. Результаты показывают, что жесткость ползуна и вертикальной направляющей (ось Z) в направлениях Y и Z слабая сторона станка. Доказано, что аналитический метод является эффективным средством оптимизации его конструкции

Charmless Bs→PP,PV,VVB_s\to PP, PV, VV Decays Based on the six-quark Effective Hamiltonian with Strong Phase Effects II

We provide a systematic study of charmless $B_s \to PP, PV, VV$ decays ($P$ and $V$ denote pseudoscalar and vector mesons, respectively) based on an approximate six-quark operator effective Hamiltonian from QCD. The calculation of the relevant hard-scattering kernels is carried out, the resulting transition form factors are consistent with the results of QCD sum rule calculations. By taking into account important classes of power corrections involving "chirally-enhanced" terms and the vertex corrections as well as weak annihilation contributions with non-trivial strong phase, we present predictions for the branching ratios and CP asymmetries of $B_s$ decays into PP, PV and VV final states, and also for the corresponding polarization observables in VV final states. It is found that the weak annihilation contributions with non-trivial strong phase have remarkable effects on the observables in the color-suppressed and penguin-dominated decay modes. In addition, we discuss the SU(3) flavor symmetry and show that the symmetry relations are generally respected

CP violation in Bd,s→l+l−B_{d,s} \to l^+l^- in the model III 2HDM

We have calculated the Wilson coefficients $C_{10}, C_{Q_i}$ (i=1,2) in the $\bar{MS}$ renormalization scheme in the model III 2HDM. Using the obtained Wilson coefficients, we have analyzed the CP violation in decays $B^0_q\to l^+l^-$ (q=d,s) in the model. The CP asymmetry, $A_{CP}$, depends on the parameters of models and $A_{CP}$ in $B_d\to l^+l^-$ can be as large as 40% and 35% for $l=\tau$ and $l=\mu$ respectively. It can reach 4% for $B^0_s$ decays. Because in SM CP violation is smaller than or equal to O($10^{-3}$) which is unobservably small, an observation of CP asymmetry in the decays $B^0_q \to l^+l^- (q=d,s)$ would unambiguously signal the existence of new physics.Comment: revtex4, 16 pages, 7 figure

Charm multiplicity and the branching ratios of inclusive charmless b quark decays in the general two-Higgs-doublet models

In the framework of general two-Higgs-doublet models, we calculate the branching ratios of various inclusive charmless b decays by using the low energy effective Hamiltonian including next-to-leading order QCD corrections, and examine the current status and the new physics effects on the determination of the charm multiplicity $n_c$ and semileptonic branching ratio $B_{SL}$. Within the considered parameter space, the enhancement to the ratio $BR(b \to s g)$ due to the charged-Higgs penguins can be as large as a factor of 8 (3) in the model III (II), while the ratio $BR(b \to no charm)$ can be increased from the standard model prediction of 2.49% to 4.91% (2.99%) in the model III (II). Consequently, the value of $B_{SL}$ and $n_c$ can be decreased simultaneously in the model III. The central value of $B_{SL}$ will be lowered slightly by about 0.003, but the ratio $n_c$ can be reduced significantly from the theoretical prediction of $n_c= 1.28 \pm 0.05$ in the SM to $n_c= 1.23 \pm 0.05$, $1.18 \pm 0.05$ for $m_{H^+}=200, 100$ GeV, respectively. We find that the predicted $n_c$ and the measured $n_c$ now agree within roughly one standard deviation after taking into account the effects of gluonic charged Higgs penguins in the model III with a relatively light charged Higgs boson.Comment: 25 pages, Latex file, axodraw.sty, 6 figures. Final version to be published in Phys.Rev.

B_c meson rare decays in the light-cone quark model

We investigate the rare decays $B_c \rightarrow D_s(1968) \ell \bar{\ell}$ and $B_c\rightarrow D_s^*(2317) \ell \bar{\ell}$ in the framework of the light-cone quark model (LCQM). The transition form factors are calculated in the space-like region and then analytically continued to the time-like region via exponential parametrization. The branching ratios and longitudinal lepton polarization asymmetries (LPAs) for the two decays are given and compared with each other. The results are helpful to investigating the structure of $B_c$ meson and to testing the unitarity of CKM quark mixing matrix. All these results can be tested in the future experiments at the LHC.Comment: 9 pages, 11 figures, version accepted for publication in EPJ

Investigation on viscosity and non-isothermal crystallization behavior of P-bearing steelmaking slags with varying TiO2 content

The viscous flow and crystallization behavior of CaO-SiO2-MgO-Al2O3-FetO-P2O5-TiO2 steelmaking slags have been investigated over a wide range of temperatures under Ar (High purity, >99.999 pct) atmosphere, and the relationship between viscosity and structure was determined. The results indicated that the viscosity of the slags slightly decreased with increasing TiO2 content. The constructed nonisothermal continuous cooling transformation (CCT) diagrams revealed that the addition of TiO2 lowered the crystallization temperature. This can mainly be ascribed to that addition of TiO2 promotes the formation of [TiO6]-octahedra units and, consequently, the formation of MgFe2O4-Mg2TiO4 solid solution. Moreover, the decreasing viscosity has a significant effect on enhancing the diffusion of ion units, such as Ca2+ and [TiO4]-tetrahedra, from bulk melts to the crystal–melt interface. The crystallization of CaTiO3 and CaSiTiO5 was consequently accelerated, which can improve the phosphorus content in P-enriched phase (n2CaO·SiO2-3CaO·P2O5). Finally, the nonisothermal crystallization kinetics was characterized and the activation energy for the primary crystal growth was derived such that the activation energy increases from −265.93 to −185.41 KJ·mol−1 with the addition of TiO2 content, suggesting that TiO2 lowered the tendency for the slags to crystallize