21,763 research outputs found
Analytical considerations of flow boiling heat transfer in metal-foam filled tubes
Flow boiling in metal-foam filled tube was analytically investigated based on a modified microstructure model, an original boiling heat transfer model and fin analysis for metal foams. Microstructure model of metal foams was established, by which fiber diameter and surface area density were precisely predicted. The heat transfer model for flow boiling in metal foams was based on annular pattern, in which two phase fluid was composed by vapor region in the center of the tube and liquid region near the wall. However, it was assumed that nucleate boiling performed only in the liquid region. Fin analysis and heat transfer network for metal foams were integrated to obtain the convective heat transfer coefficient at interface. The analytical solution was verified by its good agreement with experimental data. The parametric study on heat transfer coefficient and boiling mechanism was also carried out
A new small satellite sunspot triggering recurrent standard- and blowout-coronal jets
In this paper,we report a detailed analysis of recurrent jets originated from
a location with emerging, canceling and converging negative magnetic field at
the east edge of NOAA active region AR11166 from 2011 March 09 to 10. The event
presented several interesting features. First, a satellite sunspot appeared and
collided with a pre-existing opposite polarity magnetic field and caused a
recurrent solar jet event. Second, the evolution of the jets showed
blowout-like nature and standard characteristics. Third, the satellite sunspot
exhibited a motion toward southeast of AR11166 and merged with the emerging
flux near the opposite polarity sunspot penumbra, which afterward, due to flux
convergence and cancellation episodes, caused recurrent jets. Fourth, three of
the blowout jets associated with coronal mass ejections (CMEs), were observed
from field of view of the Solar Terrestrial Relations Observatory. Fifth,
almost all the blowout jet eruptions were accompanied with flares or with more
intense brightening in the jet base region, while almost standard jets did not
manifest such obvious feature during eruptions. The most important, the blowout
jets were inclined to faster and larger scale than the standard jets. The
standard jets instead were inclined to relative longer-lasting. The obvious
shearing and twisting motions of the magnetic field may be interpreted as due
to the shearing and twisting motions for a blowout jet eruption. From the
statistical results, about 30% blowout jets directly developed into CMEs. It
suggests that the blowout jets and CMEs should have a tight relationship.Comment: ApJ 18 pages, 7 figure
Numerical Study on Indoor Wideband Channel Characteristics with Different Internal Wall
Effects of material and configuration of the internal wall on the performance of wideband channel are investigated by using the Finite Difference Time-Domain (FDTD) method. The indoor wideband channel characteristics, such as the path-loss, Root-Mean-Square (RMS) delay spread and number of the multipath components (MPCs), are presented. The simulated results demonstrate that the path-loss and MPCs are affected by the permittivity, dielectric loss tangent and thickness of the internal wall, while the RMS delay spread is almost not relevant with the dielectric permittivity. Furthermore, the comparison of simulated result with the measured one in a simple scenario has validated the simulation study
- …