Winter Anomaly of the Lower Ionosphere and Its Possible Causes

It is a well-known fact that in winter the midlatitude lower ionosphere differs considerably from that in summer. Attempts to explain the possible causes of the winter anomaly in the lower ionosphere were made. Integrated ground-based and rocket experiments were performed in the USSR. The rockets M-100B launched in Volgograd (psi = 48.7 deg N; lambda = 44.3 deg E; psi = 43.1 deg) provided weight profiles of electron density, wind and temperature. Radio wave absorption data obtained by a I method in Volgograd and F sub min parameters values obtained at a number of Soviet ionosone stations were used to determine the situation in the lower ionosphere. It was found that a correct interpretation of the midlatitude winter radio wave absorption changes is possible only if the whole spatial-time pattern of the event is taken into account

A two component jet model for the X-ray afterglow flat segment in short GRB 051221A

In the double neutron star merger or neutron star-black hole merger model for short GRBs, the outflow launched might be mildly magnetized and neutron rich. The magnetized neutron-rich outflow will be accelerated by the magnetic and thermal pressure and may form a two component jet finally, as suggested by Vlahakis, Peng & K\"{o}nigl (2003). We show in this work that such a two component jet model could well reproduce the multi-wavelength afterglow lightcurves, in particular the X-ray flat segment, of short GRB 051221A. In this model, the central engine need not to be active much longer than the prompt $\gamma-$ray emission.Comment: 11 pages, 2 figure; Accepted for publication by ApJ

Creating social entrepreneurship in local government

The public sector is often considered synonym with inefficiency and a lack of motivation to be innovative. This paper seeks to contribute towards the literature surrounding social entrepreneurship in the public sector, through using institutional theory to underpin an e-Innovations model that promotes social entrepreneurship, while recognising how the adoption of innovation within the public sector is fostered. The proposed model seeks to serve as a process that threatens the conservative and risk-averse culture endemic in the public sector

Recycling and the Environment: a Comparative Review Between Mineral-based Plastics and Bioplastics

Since their conception in the 1950s, mineral-based plastics have completely revolutionised our society with production reaching record highs year upon year. This cheap, and durable material has seen usage across a plethora of diverse industries and products, replacing traditional materials such as metals and wood. However, our reliance on mineral-based plastics has led to their improper disposal across the global, affecting our environments and ecosystems. As a response, different methods have been developed to help dispose of the large amounts of plastic waste produced, such as incineration or dumping in landfill sites, but these methods are not without their drawbacks including release of toxic substances into the air and leachate into the soil and waters respectively. Consequently, much interest is generated and channelled in recent years to the introduction of several types of biopolymers. These include plastics based on cellulosic esters, starch derivatives, polyhydroxybutyrate and polylactic acid. These biopolymers have been viewed as a suitable replacement for mineral-based plastics, and their production a good strategy towards sustainable development as they are mainly composed of biocompounds such as starch, cellulose and sugars. This short review article provides an overview as to whether biopolymers can rival mineral-based plastics considering properties such as mechanical strength, Young’s modulus and crystallinity and could they be regarded as a suitable material to reduce our reliance on mineral-based plastics, whilst simultaneously reducing non-renewable energy consumption and carbon dioxide emissions

Learning occupants’ indoor comfort temperature through a Bayesian inference approach for office buildings in United States

A carefully chosen indoor comfort temperature as the thermostat set-point is the key to optimizing building energy use and occupants’ comfort and well-being. ASHRAE Standard 55 or ISO Standard 7730 uses the PMV-PPD model or the adaptive comfort model that is based on small-sized or outdated sample data, which raises questions on whether and how ranges of occupant thermal comfort temperature should be revised using more recent larger-sized dataset. In this paper, a Bayesian inference approach has been used to derive new occupant comfort temperature ranges for U.S. office buildings using the ASHRAE Global Thermal Comfort Database. Bayesian inference can express uncertainty and incorporate prior knowledge. The comfort temperatures were found to be higher and less variable at cooling mode than at heating mode, and with significant overlapped variation ranges between the two modes. The comfort operative temperature of occupants varies between 21.9 and 25.4 °C for the cooling mode with a median of 23.7 °C, and between 20.5 and 24.9 °C for the heating mode with a median of 22.7 °C. These comfort temperature ranges are similar to the current ASHRAE standard 55 in the heating mode but 2–3 °C lower in the cooling mode. The results of this study could be adopted as more realistic thermostat set-points in building design, operation, control optimization, energy performance analysis, and policymaking