Semisolid processing characteristics of AM series Mg alloys by rheo-diecasting

The official published version of this Article can be found at the link below - Copyright @ 2006 ASM InternationalAn investigation has been made into the solidification behavior and microstructural evolution of AM50, AM70, and AM90 alloys during rheo-diecasting, their processibility, and the resulting mechanical properties. It was found that solidification of AM series alloys under intensive melt shearing in the unique twin-screw slurry maker during rheo-diecasting gave rise to numerous spheroidal primary magnesium (Mg) particles that were uniformly present in the microstructure. As a result, the network of the beta-Mg17Al12 phase was consistently interrupted by these spheroidal and ductile particles. Such a microstructure reduced the obstacle of deformation and the harmfulness of the beta-Mg17Al12 network on ductility, and therefore improved the ductility of rheo-diecast AM alloys. It was shown that, even with 9 wt pct Al, the elongation of rheo-diecast AM90 still achieved (9 +/- 1.2) pct. Rheodiecasting thus provides an attractive processing route for upgrading the alloy specification of AM series alloys by increasing the aluminum (Al) content while ensuring ductility. Assessment of the processibility of AM series alloys for semisolid processing showed that high Al content AM series alloys are more suitable for rheo-diecasting than low Al content alloys, because of the lower sensitivity of solid fraction to temperature, the lower liquidus temperature, and the smaller interval between the semisolid processing temperature and the complete solidification temperature.This work is supported by the EPSR

On Local Equivalence, Surface Code States and Matroids

Recently, Ji et al disproved the LU-LC conjecture and showed that the local unitary and local Clifford equivalence classes of the stabilizer states are not always the same. Despite the fact this settles the LU-LC conjecture, a sufficient condition for stabilizer states that violate the LU-LC conjecture is missing. In this paper, we investigate further the properties of stabilizer states with respect to local equivalence. Our first result shows that there exist infinitely many stabilizer states which violate the LU-LC conjecture. In particular, we show that for all numbers of qubits $n\geq 28$, there exist distance two stabilizer states which are counterexamples to the LU-LC conjecture. We prove that for all odd $n\geq 195$, there exist stabilizer states with distance greater than two which are LU equivalent but not LC equivalent. Two important classes of stabilizer states that are of great interest in quantum computation are the cluster states and stabilizer states of the surface codes. To date, the status of these states with respect to the LU-LC conjecture was not studied. We show that, under some minimal restrictions, both these classes of states preclude any counterexamples. In this context, we also show that the associated surface codes do not have any encoded non-Clifford transversal gates. We characterize the CSS surface code states in terms of a class of minor closed binary matroids. In addition to making connection with an important open problem in binary matroid theory, this characterization does in some cases provide an efficient test for CSS states that are not counterexamples.Comment: LaTeX, 13 pages; Revised introduction, minor changes and corrections mainly in section V

Effect of high pressure die casting on the castability, defects and mechanical properties of aluminium alloys in extra-large thin-wall castings

The manufacturing of extra-large thin-wall castings using high pressure die casting is one of the most significant challenges for structural applications requiring excellent ductility. The present study aims to understand the effect of process parameters on the castability, defect formation and mechanical properties of aluminium alloys in extra-large thin-wall castings with a maximum flow length of 1230 mm in the 2.8 mm thick channel. Numerical simulation and experimental verification were carried out to tailor the process parameters in high pressure die casting. It is found that the process parameters can significantly affect the castability and mechanical properties of as-cast components. For a complete casting, the yield strength is slightly increased but the elongation is significantly decreased at the locations further away from runners. A new concept of effective flow length (EFL) is proposed and used to assess the castability in extra-large thin-wall high pressure die castings. Under the optimum casting condition, the EFL can reach 525 mm, at which the ratio of EFL to wall thickness is 187 and the yield strength and elongation are greater than 120 MPa and 10%, respectively. Although the extra-large thin-wall castings can be geometrically filled under several conditions, the heterogeneity of mechanical properties is the most significant concern, in which the variation of elongation is overwhelmingly important for the structural applications requiring excellent ductility under as-cast conditions. Therefore, the criteria of casting quality should consider both geometrical soundness and the homogeneity of mechanical properties in the casting body.The financial support from Innovate UK under No. 113151 is gratefully acknowledged

Generalized Relativistic Meson Wave Function

We study the most general, relativistic, constituent $q{\overline q}$ meson wave function within a new covariant framework. We find that by including a tensor wave function component, a pure valence quark model is now capable of reproducing not only all static pion data ($f_\pi$, $\langle r_\pi^2 \rangle$) but also the distribution amplitude, form factor $(F_\pi(Q^2))$, and structure functions. Further, our generalized spin wave function provides a much better detailed description of meson properties than models using a simple relativistic extension of the $S=L=0$ nonrelativistic wave function.Comment: 17 pages, REXTeX 3.0 file, (uuencoded postscript files of 8 figures appended

Aging Behavior and Mechanism Evolution of Nano-Al2O3/Styrene-Butadiene-Styrene-Modified Asphalt under Thermal-Oxidative Aging

The goal of this paper is to analyze the aging behavior and the mechanism evolution of nano-Al2O3 (NA)-reinforced styrene-butadiene-styrene (SBS) asphalt under different thermal-oxidative aging conditions. First, NA/SBS-modified asphalt and SBS-modified asphalt with different aging levels were prepared. Second, the viscosity and high temperature rheological performance of the specimens were tested and the property-related aging indexes were calculated and compared. Third, a Fourier transform infrared (FTIR) test of the specimen was conducted and the chemical group-related aging indexes were calculated and analyzed. Fourth, gel permeation chromatography (GPC) was used to analyze the molecular weight of the specimens under different aging levels. Then, an atomic force microscope (AFM) was adopted to analyze the microsurface morphology of different specimens. Finally, correlation analysis between property-related indexes and chemical group indexes was conducted. The results show that NA can enhance the thermal-oxidative aging resistance of SBS asphalt. NA can inhibit the increase in sulfoxide groups and the degradation of the SBS polymer with the increase in aging. NA can slow down the formation of large molecule during the aging process. The degree of change in both the bee structures and micromorphological roughness of NA/SBS asphalt is lower than that of SBS asphalt under different aging levels

GIST: A generative model with individual and subgroup-based topics for group recommendation

© 2017 Elsevier Ltd In this paper, a Topic-based probabilistic model named GIST is proposed to infer group activities, and make group recommendations. Compared with existing individual-based aggregation methods, it not only considers individual members’ interest, but also consider some subgroups’ interest. Intuition might seem that when a group of users want to take part in an activity, not every group member is decisive, instead, more likely the subgroups of members having close relationships lead to the final activity decision. That motivates our study on jointly considering individual members’ choices and subgroups’ choices for group recommendations. Based on this, our model uses two kinds of unshared topics to model individual members’ interest and subgroups’ interest separately, and then make final recommendations according to the choices from the two aspects with a weight-based scheme. Moreover, the link information in the graph topology of the groups can be used to optimize the weights of our model. The experimental results on real-life data show that the recommendation accuracy is significantly improved by GIST comparing with the state-of-the-art methods

Spin Dynamics in the Second Subband of a Quasi Two Dimensional System Studied in a Single Barrier Heterostructure by Time Resolved Kerr Rotation

By biasing a single barrier heterostructure with a 500nm-thick GaAs layer as the absorption layer, the spin dynamics for both of the first and second subband near the AlAs barrier are examined. We find that when simultaneously scanning the photon energy of both the probe and pump beams, a sign reversal of the Kerr rotation (KR) takes place as long as the probe photons break away the first subband and probe the second subband. This novel feature, while stemming from the exchange interaction, has been used to unambiguously distinguish the different spin dynamics ($T_2^{1*}$ and $T_2^{2*}$) for the first and second subbands under the different conditions by their KR signs (negative for $1^{st}$ and positive for $2^{nd}$). In the zero magnetic field, by scanning the wavelength towards the short wavelength, $T_2^{1*}$ decreases in accordance with the D'yakonov-Perel' (DP) spin decoherence mechanism. At 803nm, $T_2^{2*}$(450ps) becomes ten times longer than $T_2^{1*}$(50ps). However, the value of $T_2^{2*}$ at 803nm is roughly the same as the value of $T_2^{1*}$ at 815nm. A new feature has been disclosed at the wavelength of 811nm under the bias of -0.3V (807nm under the bias of -0.6V) that the spin coherence times ($T_2^{1*}$ and $T_2^{2*}$) and the effective $g^*$ factors ($|g^*(E1)|$ and $|g^*(E2)|$) all display a sudden change, due to the "resonant" spin exchange coupling between two spin opposite bands.Comment: 9pages, 3 figure

Electrical Control of Dynamic Spin Splitting Induced by Exchange Interaction as Revealed by Time Resolved Kerr Rotation in a Degenerate Spin-Polarized Electron Gas

The manipulation of spin degree of freedom have been demonstrated in spin polarized electron plasma in a heterostructure by using exchange-interaction induced dynamic spin splitting rather than the Rashba and Dresselhaus types, as revealed by time resolved Kerr rotation. The measured spin splitting increases from 0.256meV to 0.559meV as the bias varies from -0.3V to -0.6V. Both the sign switch of Kerr signal and the phase reversal of Larmor precessions have been observed with biases, which all fit into the framework of exchange-interaction-induced spin splitting. The electrical control of it may provide a new effective scheme for manipulating spin-selected transport in spin FET-like devices.Comment: 8 pages, 3 figures ; added some discussion