18,283 research outputs found
A reconfigurable optical header recognition system for optical packet routing applications
We demonstrate a reconfigurable all-optical packet processing system. The key device is a code-reconfigurable header decoder based on a fiber Bragg grating. The performance of the system is tested for different packet headers, and error-free operation is confirmed
Analytical considerations of flow boiling heat transfer in metal-foam filled tubes
Flow boiling in metal-foam filled tube was analytically investigated based on a modified microstructure model, an original boiling heat transfer model and fin analysis for metal foams. Microstructure model of metal foams was established, by which fiber diameter and surface area density were precisely predicted. The heat transfer model for flow boiling in metal foams was based on annular pattern, in which two phase fluid was composed by vapor region in the center of the tube and liquid region near the wall. However, it was assumed that nucleate boiling performed only in the liquid region. Fin analysis and heat transfer network for metal foams were integrated to obtain the convective heat transfer coefficient at interface. The analytical solution was verified by its good agreement with experimental data. The parametric study on heat transfer coefficient and boiling mechanism was also carried out
Rapidly reconfigurable optical phase encoder-decoders based on fiber Bragg gratings
We demonstrate the capacity for fast dynamic reconfiguration of optical code-division multiple access (OCDMA) phase en/decoders based on fiber Bragg gratings and a thermal phase-tuning technique. The tuning time between two different phase codes is measured to be less than 2 s. An OCDMA system using tunable-phase decoders is compared with a system using fixed-phase decoders and, although the system using fixed-phase decoders exhibits a shorter output autocorrelation pulsewidth and lower sidelobes, the system using tunable-phase decoders has advantages of flexibility and a more relaxed requirement on the input pulsewidth
Recommended from our members
Preliminary experimental comparison and feasibility analysis of CO2/R134a mixture in Organic Rankine Cycle for waste heat recovery from diesel engines
This paper presents results of a preliminary experimental study of the Organic Rankine Cycle (ORC) using CO2/R134a mixture based on an expansion valve. The goal of the research was to examine the feasibility and effectiveness of using CO2 mixtures to improve system performance and expand the range of condensation temperature for ORC system. The mixture of CO2/R134a (0.6/0.4) on a mass basis was selected for comparison with pure CO2 in both the preheating ORC (P-ORC) and the preheating regenerative ORC (PR-ORC). Then, the feasibility and application potential of CO2/R134a (0.6/0.4) mixture for waste heat recovery from engines was tested under ambient cooling conditions. Preliminary experimental results using an expansion valve indicate that CO2/R134a (0.6/0.4) mixture exhibits better system performance than pure CO2. For PR-ORC using CO2/R134a (0.6/0.4) mixture, assuming a turbine isentropic efficiency of 0.7, the net power output estimation, thermal efficiency and exergy efficiency reached up to 5.30 kW, 10.14% and 24.34%, respectively. For the fitting value at an expansion inlet pressure of 10 MPa, the net power output estimation, thermal efficiency and exergy efficiency using CO2/R134a (0.6/0.4) mixture achieved increases of 23.3%, 16.4% and 23.7%, respectively, versus results using pure CO2 as the working fluid. Finally, experiments showed that the ORC system using CO2/R134a (0.6/0.4) mixture is capable of operating stably under ambient cooling conditions (25.2–31.5 °C), demonstrating that CO2/R134a mixture can expand the range of condensation temperature and alleviate the low-temperature condensation issue encountered with CO2. Under the ambient cooling source, it is expected that ORC using CO2/R134a (0.6/0.4) mixture will improve the thermal efficiency of a diesel engine by 1.9%
SMART SOP ARCHITECTURES AND POWER CONTROL MANAGEMENTS BETWEEN LIGHT DC RAILWAY AND LV DISTRIBUTION NETWORK
This paper presents different architectures of smart soft open points to interface electrified DC railways and low voltage power distribution networks. Both networks have similar objectives of power losses reduction, preserve network stability even with a high penetration of renewable energy sources, and accommodate new energy sectors such as electric vehicles and energy storage systems. The proposed smart soft open points will enable a flexible inter-exchange of electrical power between the two networks in order to achieve these challenging objectives. Different power management control approaches are provided in this paper according to the traffic conditions on the railway network as well as the power and voltage conditions of the distribution network
Recommended from our members
Fluid drag-reducing effect and mechanism of superhydrophobic
This paper was presented at the 4th Micro and Nano Flows Conference (MNF2014), which was held at University College, London, UK. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute, ASME Press, LCN London Centre for Nanotechnology, UCL University College London, UCL Engineering, the International NanoScience Community, www.nanopaprika.eu.In this paper, drag-reducing property and mechanism of superhydrophobic surface are investigated.
Superhydrophobic surfaces with micro-nano textures were fabricated and tested using SEM and contact
angle measurement. Experiments on a channel and a flat plate with superhydrophobic surface were
conducted separately. For the channel flow, the drag was acquired by measuring the pressure loss. A 54%
drag reduction was found both in laminar and turbulent flow over Re range from 500 to 5000. For flow over
a plate, PIV measurement was used to obtain the velocity distribution at Reδ=12000. There was a 19%
reduction on the total stress in the whole boundary layer. Suppressions of the turbulence intensities and the
Reynolds shear stress were found, which may cause the drag reduction
Reversible Embedding to Covers Full of Boundaries
In reversible data embedding, to avoid overflow and underflow problem, before
data embedding, boundary pixels are recorded as side information, which may be
losslessly compressed. The existing algorithms often assume that a natural
image has little boundary pixels so that the size of side information is small.
Accordingly, a relatively high pure payload could be achieved. However, there
actually may exist a lot of boundary pixels in a natural image, implying that,
the size of side information could be very large. Therefore, when to directly
use the existing algorithms, the pure embedding capacity may be not sufficient.
In order to address this problem, in this paper, we present a new and efficient
framework to reversible data embedding in images that have lots of boundary
pixels. The core idea is to losslessly preprocess boundary pixels so that it
can significantly reduce the side information. Experimental results have shown
the superiority and applicability of our work
- …