Indoor mould growth prediction using coupled computational fluid dynamics and mould growth model

This study investigates, using in-situ and numerical simulation experiments, airflow and hygrothermal distribution in a mechanically ventilated academic research facility with known cases of microbial proliferations. Microclimate parameters were obtained from in-situ experiments and used as boundary conditions and validation of the numerical experiments with a commercial computational fluid dynamics (CFD) analysis tool using the standard k–ε model. Good agreements were obtained with less than 10% deviations between the measured and simulated results. Subsequent upon successful validation, the model was used to investigate hygrothermal and airflow profile within the shelves holding stored components in the facility. The predicted in-shelf hygrothermal profile was superimposed on mould growth limiting curve earlier documented in the literature. Results revealed the growth of xerophilic species in most parts of the shelves. The mould growth prediction was found in correlation with the microbial investigation in the case-studied room reported by the authors elsewhere. Satisfactory prediction of mould growth in the room successfully proved that the CFD simulation can be used to investigate the conditions that lead to microbial growth in the indoor environment

Correlation functions of small-scale fluctuations of the interplanetary magnetic field

The Interplanetary Magnetic Field shows complex spatial and temporal variations. Single spacecraft measurements reveal only a one dimensional section of this rich four dimensional phenomenon. Multi-point measurements of the four Cluster spacecraft provide a unique tool to study the spatiotemporal structure of the field. Using Cluster data we determined three dimensional correlation functions of the fluctuations. By means of the correlation function one can describe and measure field variations. Our results can be used to verify theoretical predictions, to understand the formation and nature of solar wind turbulence. We found that the correlation length varies over almost six orders of magnitude. The IMF turbulence shows significant anisotropy with two distinct populations. In certain time intervals the ratio of the three axes of the correlation ellipse is 1/2.2/6 while in the remaining time we found extremely high correlation along one axis. We found favoured directions in the orientation of the correlation ellipsoids.Comment: accepted to Solar Physics on June 14, 2010. 10 pages, 8 figure

Optimally Controlled Field-Free Orientation of the Kicked Molecule

Efficient and long-lived field-free molecular orientation is achieved using only two kicks appropriately delayed in time. The understanding of the mechanism rests upon a molecular target state providing the best efficiency versus persistence compromise. An optimal control scheme is referred to for fixing the free parameters (amplitudes and the time delay between them). The limited number of kicks, the robustness and the transposability to different molecular systems advocate in favor of the process, when considering its experimental feasibility.Comment: 5 pages, 2 figures (version 2 contains some minor additions and corrects many misprints

The geometric order of stripes and Luttinger liquids

It is argued that the electron stripes as found in correlated oxides have to do with an unrecognized form of order. The manifestation of this order is the robust property that the charge stripes are at the same time anti-phase boundaries in the spin system. We demonstrate that the quantity which is ordering is sublattice parity, referring to the geometric property of a bipartite lattice that it can be subdivided in two sublattices in two different ways. Re-interpreting standard results of one dimensional physics, we demonstrate that the same order is responsible for the phenomenon of spin-charge separation in strongly interacting one dimensional electron systems. In fact, the stripe phases can be seen from this perspective as the precise generalization of the Luttinger liquid to higher dimensions. Most of this paper is devoted to a detailed exposition of the mean-field theory of sublattice parity order in 2+1 dimensions. Although the quantum-dynamics of the spin- and charge degrees of freedom is fully taken into account, a perfect sublattice parity order is imposed. Due to novel order-out-of-disorder physics, the sublattice parity order gives rise to full stripe order at long wavelength. This adds further credibility to the notion that stripes find their origin in the microscopic quantum fluctuations and it suggests a novel viewpoint on the relationship between stripes and high Tc superconductivity.Comment: 29 pages, 14 figures, 1 tabl

Studies of ion transport and electrochemical properties of plasticized composite polymer electrolytes

The composite polymer electrolytes (CPEs) composed of polyacrylonitrile (PAN) as host polymer, lithium tetraflouroborate (LiBF4) as dopant salt, dissoÅlved in the mixture of ethylene carbonate (EC) and dimethyl phthalate (DMP) as plasticizing solvent, with the addition of silica (SiO2) as inorganic filler were prepared by the solution casting technique. The CPE films were prepared by varying the concentrations of SiO2 from 1 to 5 wt. %. The CPE film containing 3 wt. % of SiO2 exhibits the highest ionic conductivity of 1.36 × 10-2 S cm-1 at room temperature while for temperature dependence studies, the plot obtained obeyed Arrhenius rule and the calculated activation energy was 0.11 eV. The ionic conductivity of the CPEs was found to depend on the concentration of ion pairs of dopant salt as showed by FTIR spectra. The calculated value of lithium ions transport number, tLi+ for the highest conducting CPE film was 0.15. This result indicates that anionic species are the main contributor to the total conductivity of the CPE. The CPE film has an electrochemical stability higher than the non-filler film

Evaluating e-Government services from a citizens' prespective: A reference process model

Evaluating and optimizing e-government services is imperative for governments especially due to the capacity of e-services to transform public administrations and assist the interactions of governments with citizens, businesses and other government agencies. Existing widely applied evaluation approaches neglect to incorporate citizens’ satisfaction measures. Several citizen satisfaction models and indicators have been suggested in academia; however a reference process model that can assist practitioners to apply these performance measures is missing. In this paper we draw upon the evaluation approach proposed by the EU funded project CEES and propose a reference process model that captures re-usable practices for e-government evaluation from a citizens’ perspective. The novelty of the proposed approach is that using DEA for evaluating the e-services the assessment results in suggestions for strategic improvement of the e-services.EU FP7 Marie Curie People Project “CEES - Citizen oriented Evaluation of E-Government Systems” (reference IAPP-2008-230658

Architecture in Sudan: The Post–Independence Era (1956-1970). Focus on the Work of Abdel Moneim Mustafa

This article is part of a study on the Sudanese social and political context during the formation of the Modern Movement and the manifestations in built form and spatial expression during the period 1900-1970. The study has been on–going for several years and includes a literature search, local surveys (of unpublished and undocumented information) as well as photographs taken by the authors, sourced from architects or published material. It is argued that the Sudanese response to the International Style was in fact early experimentation in critical regionalism. The most notable architectural heritage in Sudan are the archaeological remains at Kerma and Napata as well as the remains of ancient Meroe about 180 km north of Khartoum. These cultures demonstrated sophistication in building materials and construction techniques. Due to climate changes, political changes and religious changes over a large stretch of time (642AD with the signing of the Bagt Treaty–1898 at the demise of the Mahdist era) the qualities of the built environment became more transient and rudimentary in character with a greater focus on manifesting tradition through body images, clothing and rituals that were not necessarily tied to a particular physical location rather than through monuments. With foreign interest in the strategic location of the Sudan, and as a part of the scramble for Africa, came specific stylistic and technical manifestations

Real time object customization in CAD system

Object customization in Computer Aided Design (CAD) is a method used to modify the sketch parameters and change the model geometries. This method is one of important features in part modelling which empowered CAD user to simply modify their product. The conventional method of modifying CAD model is usually relied on the manual editing. This paper outlines a development of program than can be integrated in CAD/CAM system for real time object customization. It uses Visual Basic (VB) programming with custom Graphical User Interface (GUI) generated in NX10 (CAD/CAM software) interface. The main contribution of this research is a tool for real time object customization that capable to assist the modification of 3D model. In order to develop the tool, 3D model modification instructions are translated into programming codes by using Journaling tools in NX interface. Editable parameters are identified based on the model shapes. The related codes are reconstructed, modified and linked to the functional GUI.  This allows user to simply modify the model shapes in real time with minimum process steps. The performance of the method is evaluated in terms of the reduction of process steps and time in modifying the 3D model in CAD system. All the findings and details of approach are presented

Approaches to Learning to Control Dynamic Uncertainty

In dynamic environments, when faced with a choice of which learning strategy to adopt, do people choose to mostly explore (maximizing their long term gains) or exploit (maximizing their short term gains)? More to the point, how does this choice of learning strategy influence one’s later ability to control the environment? In the present study, we explore whether people’s self-reported learning strategies and levels of arousal (i.e., surprise, stress) correspond to performance measures of controlling a Highly Uncertain or Moderately Uncertain dynamic environment. Generally, self-reports suggest a preference for exploring the environment to begin with. After which, those in the Highly Uncertain environment generally indicated they exploited more than those in the Moderately Uncertain environment; this difference did not impact on performance on later tests of people’s ability to control the dynamic environment. Levels of arousal were also differentially associated with the uncertainty of the environment. Going beyond behavioral data, our model of dynamic decision-making revealed that, in actual fact, there was no difference in exploitation levels between those in the highly uncertain or moderately uncertain environments, but there were differences based on sensitivity to negative reinforcement. We consider the implications of our findings with respect to learning and strategic approaches to controlling dynamic uncertainty.This study was supported by the Engineering and Physical Sciences Research Council