2,895 research outputs found
Finding 2-Edge and 2-Vertex Strongly Connected Components in Quadratic Time
We present faster algorithms for computing the 2-edge and 2-vertex strongly
connected components of a directed graph, which are straightforward
generalizations of strongly connected components. While in undirected graphs
the 2-edge and 2-vertex connected components can be found in linear time, in
directed graphs only rather simple -time algorithms were known. We use
a hierarchical sparsification technique to obtain algorithms that run in time
. For 2-edge strongly connected components our algorithm gives the
first running time improvement in 20 years. Additionally we present an -time algorithm for 2-edge strongly connected components, and thus
improve over the running time also when . Our approach
extends to k-edge and k-vertex strongly connected components for any constant k
with a running time of for edges and for vertices
High-density information storage in an absolutely defined aperiodic sequence of monodisperse copolyester
Synthesis of a polymer composed of a large discrete number of chemically distinct monomers in an absolutely defined aperiodic sequence remains a challenge in polymer chemistry. The synthesis has largely been limited to oligomers having a limited number of repeating units due to the difficulties associated with the step-by-step addition of individual monomers to achieve high molecular weights. Here we report the copolymers of ??-hydroxy acids, poly(phenyllactic-co-lactic acid) (PcL) built via the cross-convergent method from four dyads of monomers as constituent units. Our proposed method allows scalable synthesis of sequence-defined PcL in a minimal number of coupling steps from reagents in stoichiometric amounts. Digital information can be stored in an aperiodic sequence of PcL, which can be fully retrieved as binary code by mass spectrometry sequencing. The information storage density (bit/Da) of PcL is 50% higher than DNA, and the storage capacity of PcL can also be increased by adjusting the molecular weight (~38???kDa)
Dual-gated bilayer graphene hot electron bolometer
Detection of infrared light is central to diverse applications in security,
medicine, astronomy, materials science, and biology. Often different materials
and detection mechanisms are employed to optimize performance in different
spectral ranges. Graphene is a unique material with strong, nearly
frequency-independent light-matter interaction from far infrared to
ultraviolet, with potential for broadband photonics applications. Moreover,
graphene's small electron-phonon coupling suggests that hot-electron effects
may be exploited at relatively high temperatures for fast and highly sensitive
detectors in which light energy heats only the small-specific-heat electronic
system. Here we demonstrate such a hot-electron bolometer using bilayer
graphene that is dual-gated to create a tunable bandgap and
electron-temperature-dependent conductivity. The measured large electron-phonon
heat resistance is in good agreement with theoretical estimates in magnitude
and temperature dependence, and enables our graphene bolometer operating at a
temperature of 5 K to have a low noise equivalent power (33 fW/Hz1/2). We
employ a pump-probe technique to directly measure the intrinsic speed of our
device, >1 GHz at 10 K.Comment: 5 figure
Risk assessment for the spread of Serratia marcescens within dental-unit waterline systems using Vermamoeba vermiformis
Vermamoeba vermiformis is associated with the biofilm ecology of dental-unit waterlines (DUWLs). This study investigated whether V. vermiformis is able to act as a vector for potentially pathogenic bacteria and so aid their dispersal within DUWL systems. Clinical dental water was initially examined for Legionella species by inoculating it onto Legionella selective-medium plates. The molecular identity/profile of the glassy colonies obtained indicated none of these isolates were Legionella species. During this work bacterial colonies were identified as a non-pigmented Serratia marcescens. As the water was from a clinical DUWL which had been treated with Alpron™ this prompted the question as to whether S. marcescens had developed resistance to the biocide. Exposure to Alpron™ indicated that this dental biocide was effective, under laboratory conditions, against S. marcescens at up to 1x108 colony forming units/millilitre (cfu/ml). V. vermiformis was cultured for eight weeks on cells of S. marcescens and Escherichia coli. Subsequent electron microscopy showed that V. vermiformis grew equally well on S. marcescens and E. coli (p = 0.0001). Failure to detect the presence of S. marcescens within the encysted amoebae suggests that V. vermiformis is unlikely to act as a vector supporting the growth of this newly isolated, nosocomial bacterium
Affinity Inequality among Serum Antibodies That Originate in Lymphoid Germinal Centers
Upon natural infection with pathogens or vaccination, antibodies are produced by a process called affinity maturation. As affinity maturation ensues, average affinity values between an antibody and ligand increase with time. Purified antibodies isolated from serum are invariably heterogeneous with respect to their affinity for the ligands they bind, whether macromolecular antigens or haptens (low molecular weight approximations of epitopes on antigens). However, less is known about how the extent of this heterogeneity evolves with time during affinity maturation. To shed light on this issue, we have taken advantage of previously published data from Eisen and Siskind (1964). Using the ratio of the strongest to the weakest binding subsets as a metric of heterogeneity (or affinity inequality), we analyzed antibodies isolated from individual serum samples. The ratios were initially as high as 50-fold, and decreased over a few weeks after a single injection of small antigen doses to around unity. This decrease in the effective heterogeneity of antibody affinities with time is consistent with Darwinian evolution in the strong selection limit. By contrast, neither the average affinity nor the heterogeneity evolves much with time for high doses of antigen, as competition between clones of the same affinity is minimal.Ragon Institute of MGH, MIT and HarvardSamsung Scholarship FoundationNational Science Foundation (U.S.). Graduate Research Fellowship (Grant 1122374
Measurement of the proton form factor by studying
Using data samples collected with the BESIII detector at the BEPCII collider,
we measure the Born cross section of at 12
center-of-mass energies from 2232.4 to 3671.0 MeV. The corresponding effective
electromagnetic form factor of the proton is deduced under the assumption that
the electric and magnetic form factors are equal . In
addition, the ratio of electric to magnetic form factors, , and
are extracted by fitting the polar angle distribution of the proton
for the data samples with larger statistics, namely at 2232.4 and
2400.0 MeV and a combined sample at = 3050.0, 3060.0 and 3080.0 MeV,
respectively. The measured cross sections are in agreement with recent results
from BaBar, improving the overall uncertainty by about 30\%. The
ratios are close to unity and consistent with BaBar results in
the same region, which indicates the data are consistent with the
assumption that within uncertainties.Comment: 13 pages, 24 figure
Observation of the isospin-violating decay
Using a sample of 1.31 billion events collected with the BESIII
detector at the BEPCII collider, the decays and are
investigated. The isospin violating decay
with , is observed for the first time. The width of the
obtained from the dipion mass spectrum is found to be much smaller
than the world average value. In the mass spectrum, there
is evidence of production. By studying the decay , the branching fractions of and
, as well as their ratio, are also measured.Comment: 10 pages, 10 figures, published in Phys. Rev.
An amplitude analysis of the system produced in radiative decays
An amplitude analysis of the system produced in radiative
decays is presented. In particular, a piecewise function that
describes the dynamics of the system is determined as a
function of from an analysis of the
decays collected by the BESIII detector.
The goal of this analysis is to provide a description of the scalar and tensor
components of the system while making minimal assumptions about
the properties or number of poles in the amplitude. Such a model-independent
description allows one to integrate these results with other related results
from complementary reactions in the development of phenomenological models,
which can then be used to directly fit experimental data to obtain parameters
of interest. The branching fraction of is
determined to be , where the uncertainty is
systematic only and the statistical uncertainty is negligible.Comment: Submitted to Phys. Rev. D 19 pages, 4 figure
Targeted gene delivery in tumor xenografts by the combination of ultrasound-targeted microbubble destruction and polyethylenimine to inhibit survivin gene expression and induce apoptosis
<p>Abstract</p> <p>Background</p> <p>Noninvasive and tissue-specific technologies of gene transfection would be valuable in clinical gene therapy. This present study was designed to determine whether it could enhance gene transfection <it>in vivo </it>by the combination of ultrasound-targeted microbubble destruction (UTMD) with polyethylenimine (PEI) in tumor xenografts, and illuminate the effects of gene silencing and apoptosis induction with short hairpin RNA (shRNA) interference therapy targeting human survivin by this novel technique.</p> <p>Methods</p> <p>Two different expression vectors (pCMV-LUC and pSIREN) were incubated with PEI to prepare cationic complexes (PEI/DNA) and confirmed by the gel retardation assay. Human cervical carcinoma (Hela) tumors were planted subcutaneously in both flanks of nude mice. Tumor-bearing mice were administered by tail vein with PBS, plasmid, plasmid and SonoVue microbubble, PEI/DNA and SonoVue microbubble. One tumor was exposed to ultrasound irradiation, while the other served as control. The feasibility of targeted delivery and tissue specificity facilitated by UTMD and PEI were investigated. Moreover, immunohistochemistry analyses about gene silencing and apoptosis induction were detected.</p> <p>Results</p> <p>Electrophoresis experiment revealed that PEI could condense DNA efficiently. The application of UTMD significantly increases the tissue transfection. Both expression vectors showed that gene expressions were present in all sections of tumors that received ultrasound exposure but not in control tumors. More importantly, the increases in transgene expression were related to UTMD with the presence of PEI significantly. Silencing of the survivin gene could induce apoptosis effectively by downregulating survivin and bcl-2 expression, also cause up-regulation of bax and caspase-3 expression.</p> <p>Conclusions</p> <p>This noninvasive, novel combination of UTMD with PEI could enhance targeted gene delivery and gene expression in tumor xenografts at intravenous administration effectively without causing any apparently adverse effect, and might be a promising candidate for gene therapy. Silencing of survivin gene expression with shRNA could be facilitated by this non-viral technique, and lead to significant cell apoptosis.</p
Gaugino Anomaly Mediated SUSY Breaking: phenomenology and prospects for the LHC
We examine the supersymmetry phenomenology of a novel scenario of
supersymmetry (SUSY) breaking which we call Gaugino Anomaly Mediation, or
inoAMSB. This is suggested by recent work on the phenomenology of flux
compactified type IIB string theory. The essential features of this scenario
are that the gaugino masses are of the anomaly-mediated SUSY breaking (AMSB)
form, while scalar and trilinear soft SUSY breaking terms are highly
suppressed. Renormalization group effects yield an allowable sparticle mass
spectrum, while at the same time avoiding charged LSPs; the latter are common
in models with negligible soft scalar masses, such as no-scale or gaugino
mediation models. Since scalar and trilinear soft terms are highly suppressed,
the SUSY induced flavor and CP-violating processes are also suppressed. The
lightest SUSY particle is the neutral wino, while the heaviest is the gluino.
In this model, there should be a strong multi-jet +etmiss signal from squark
pair production at the LHC. We find a 100 fb^{-1} reach of LHC out to
m_{3/2}\sim 118 TeV, corresponding to a gluino mass of \sim 2.6 TeV. A double
mass edge from the opposite-sign/same flavor dilepton invariant mass
distribution should be visible at LHC; this, along with the presence of short--
but visible-- highly ionizing tracks from quasi-stable charginos, should
provide a smoking gun signature for inoAMSB.Comment: 30 pages including 14 .eps figure
- …