OCTAD-S: Digital Fast Fourier Transform Spectrometers by FPGA

We have developed a digital fast Fourier transform (FFT) spectrometer made of an analog-to-digital converter (ADC) and a field-programmable gate array (FPGA). The base instrument has independent ADC and FPGA modules, which allow us to implement different spectrometers in a relatively easy manner. Two types of spectrometers have been instrumented, one with 4.096 GS/s sampling speed and 2048 frequency channels and the other with 2.048 GS/s sampling speed and 32768 frequency channels. The signal processing in these spectrometers has no dead time and the accumulated spectra are recorded in external media every 8 ms. A direct sampling spectroscopy up to 8 GHz is achieved by a microwave track-and-hold circuit, which can reduce the analog receiver in front of the spectrometer. Highly stable spectroscopy with a wide dynamic range was demonstrated in a series of laboratory experiments and test observations of solar radio bursts.Comment: 20 pages, 7 figures, accepted for publication in Earth, Planets and Spac

Accuracy of Length of Virtual Stents in Treatment of Intracranial Wide-Necked Aneurysms.

Background and purposePrecise stent deployment is important for successful treatment of intracranial aneurysms by stent-assisted coiling (SAC). We evaluated the accuracy of virtual stents generated using commercial stent planning software by comparing the length of virtual and actually deployed intracranial laser cut stents on three-dimensional digital subtraction angiography (3D-DSA) images.MethodsWe retrospectively analyzed the data of 75 consecutive cases of intracranial wide-necked aneurysms treated with the SAC technique using laser cut stents. Based on 3D-DSA images acquired by C-arm CT, stent sizing and placement were intraoperatively simulated by a commercial software application. The difference in length of the stents was estimated by measuring proximal discrepancies between the end points of the virtual and actually deployed stents on fused pre-procedural and post-procedural 3D-DSA images. Discrepancies between distal stent end points were manually minimized. The Kruskal-Wallis test was applied to test whether stent location, type, and length had an effect on difference in length between virtual and real stent.ResultsThe median difference in length between virtual and real stents was 1.58 mm with interquartile range 1.12-2.12 mm. There was no evidence for an effect of stent location (p = 0.23), stent type (p = 0.33), or stent length (p = 0.53) on difference in length between virtual and real stents.ConclusionsStent planning software allows 3D simulation of laser cut stents overlain on 3D-DSA images of vessels and may thus be useful for stent selection and deployment of laser cut stents during stent-assisted coiling of intracranial aneurysms

Estimated pretreatment hemodynamic prognostic factors of aneurysm recurrence after endovascular embolization.

BACKGROUND:Hemodynamic factors play important roles in aneurysm recurrence after endovascular treatment. OBJECTIVE:Predicting the risk of recurrence by hemodynamic analysis using an untreated aneurysm model is important because such prediction is required before treatment. METHODS:We retrospectively analyzed hemodynamic factors associated with aneurysm recurrence from pretreatment models of five recurrent and five stable posterior communicating artery (Pcom) aneurysms with no significant differences in aneurysm volume, coil packing density, or sizes of the dome, neck, or Pcom. Hemodynamic factors of velocity ratio, flow rate, pressure ratio, and wall shear stress were investigated. RESULTS:Among the hemodynamic factors investigated, velocity ratio and flow rate of the Pcom showed significant differences between the recurrence group and stable group (0.630 ± 0.062 and 0.926 ± 0.051, P= 0.016; 56.4 ± 8.9 and 121.6 ± 6.7, P= 0.008, respectively). CONCLUSIONS:Our results suggest that hemodynamic factors may be associated with aneurysm recurrence among Pcom aneurysms. Velocity and flow rate in the Pcom may be a pretreatment prognostic factor for aneurysm recurrence after endovascular treatment

Combination of high-resolution cone beam computed tomography and metal artefact reduction software: a new image fusion technique for evaluating intracranial stent apposition after aneurysm treatment.

We introduce a new imaging technique to improve visualisation of stent apposition after endovascular treatment of brain aneurysms employing high-resolution cone beam CT and three-dimensional digital subtraction angiography. After performing a stent-assisted coil embolisation of brain aneurysm, the image datasets were processed with a metal artefact reduction software followed by the automated image fusion programmes. Two patients who underwent aneurysm coiling using a Neuroform stent were evaluated. The reconstructed 3D images showed a detailed structure of the stent struts and identified malappositions of the deployed stents. Case 1 showed good apposition on the outer curvature side of the carotid siphon, while the inner curvature side showed prominent malapposition. Case 2, with multiple aneurysms, showed good apposition on both outer and inner curvature sides, although inward prolapse of the struts was observed. This new imaging technique may help evaluate stent apposition after the endovascular aneurysm treatment

計算機クラスタを用いた並列メタ戦略アルゴリズムの設計と実装

1 はじめに 2 メタ戦略 3 並列化 4 並列メタ戦略の見積もり 5 実装と実験結果 6 おわりに工学分野を始めとする様々な分野において現れる問題の多くは現実的な時間で最適解を求めることが難しいとされるNP困難のクラスに属しており、このため最適解ではないまでも比較的良い解を高速に求めることができるメタ戦略の研究が近年盛んに行なわれている。逐次アルゴリズムを計算機クラスタ上で並列化する際、十分な並列度を保つような実装が求められるが、メタ戦略はその動作が複雑であるため、一般に逐次メタ戦略の並列化には対象となるメタ戦略の動作の詳細までの把握が必要とされる。本稿では対象とするメタ戦略の動作の詳細を知ることなく高性能な並列メタ戦略を設計することのできる、メタ戦略並列化手法を提案する。本手法はメタ戦略に対する特徴付といくつかの簡単な予備実験の結果解析に基づいており、有名なNP困難問題の一つである一般化割当問題に対する実装例では、公開されているベンチマーク問題への最良解を更新するなど、十分な性能を持つことが確認された