290 research outputs found
Human cortical areas involved in perception of surface glossiness
AbstractGlossiness is the visual appearance of an object's surface as defined by its surface reflectance properties. Despite its ecological importance, little is known about the neural substrates underlying its perception. In this study, we performed the first human neuroimaging experiments that directly investigated where the processing of glossiness resides in the visual cortex. First, we investigated the cortical regions that were more activated by observing high glossiness compared with low glossiness, where the effects of simple luminance and luminance contrast were dissociated by controlling the illumination conditions (Experiment 1). As cortical regions that may be related to the processing of glossiness, V2, V3, hV4, VO-1, VO-2, collateral sulcus (CoS), LO-1, and V3A/B were identified, which also showed significant correlation with the perceived level of glossiness. This result is consistent with the recent monkey studies that identified selective neural response to glossiness in the ventral visual pathway, except for V3A/B in the dorsal visual pathway, whose involvement in the processing of glossiness could be specific to the human visual system. Second, we investigated the cortical regions that were modulated by selective attention to glossiness (Experiment 2). The visual areas that showed higher activation to attention to glossiness than that to either form or orientation were identified as right hV4, right VO-2, and right V3A/B, which were commonly identified in Experiment 1. The results indicate that these commonly identified visual areas in the human visual cortex may play important roles in glossiness perception
Before-after (1998 and 2008) trend analyses on regional clustering of clinical dentist-to-population ratio in all 1,976 municipalities of Japan
Purpose: The main purpose of this study was to obtain geographic clustering information in order to identify shortages (“cold spots”) and surpluses (“hot spots”) of dentists in all municipalities of Japan. Methods: Pretreatment steps were conducted to recover the lost comparability between pre-1998 and post-2008 data due to the large-scale merging of municipalities (42.1% reduction) in the Heisei era. Moran’s I, LISA and spatial multiple regression analyses with AIC were performed to verify regional clustering. Dependent variables of the regression analyses were the clinical dentist-to-population ratio in 2008 (Model 1) and the difference between 1998 and 2008 (Model 2). Results: The R2 was 0.8379 (p<0.0001) for Model 1 and 0.5832 (p<0.0001) for Model 2. The initial dentist-to-population ratio in 1998 showed the highest significance in both models. However, the coefficient of Model 2 was negative, which was exactly the opposite of that of Model 1. Furthermore, indices relating to urbanization and hospital dentist-to-population ratio in 1998 were also highly significant (p<0.01) after adjustment for confounding factors. High- High clustered municipalities are located in most urbanized areas, whereas Low-Low clustered municipalities are located in remote areas far from urbanized areas. This study revealed that factors which attract dental clinics are urbanization and hospitals with dental care capabilities. Conclusion: Clinical dentist-topopulation ratios have improved only in municipalities in urbanized areas in the past ten years. On the contrary, accessibility of dental treatment has not improved in remote/isolated areas
Thermally stable multi-mode polymer optical waveguide fabricated by single-step photo-patterning of fluorinated polyimide/epoxy hybrids
ABSTRACT Novel polyimide (PI)/epoxy hybrid material for single-step photo-patterning of optical waveguides was prepared by blending of a semi-aromatic fluorinated poly(amic acid silylester) (PASE), a cycloaliphatic epoxy compound, and a photo-acid generator. A large refractive index change (δn, > 0.01), which is sufficient for multi-mode optical waveguides, was obtained between the polymer films prepared with and without UV irradiation. The refractive index change was generated by cationic reaction between the silylated carbonyl ester groups of PASE and epoxy rings, which was initiated by UV irradiation and promoted by successive thermal curing. The difference in molecular structures, which results in the refractive index changes, were characterized by FT-IR measurements, and it was clarified that the films with and without UV irradiation showed PASE and PI structures, respectively. These films exhibited high thermal stability higher than 230°C, which are desirable for waveguide fabrication for optical inter-connects and lightwave circuits. Using this hybrid material, channel-type optical waveguides were successfully fabricated by the single-step photo-patterning procedure without development by aqueous or organic solvents, which is more facile and economical for waveguide mass-fabrication
Thermally stable multi-mode polymer optical waveguide fabricated by single-step photo-patterning of fluorinated polyimide/epoxy hybrids
ABSTRACT Novel polyimide (PI)/epoxy hybrid material for single-step photo-patterning of optical waveguides was prepared by blending of a semi-aromatic fluorinated poly(amic acid silylester) (PASE), a cycloaliphatic epoxy compound, and a photo-acid generator. A large refractive index change (δn, > 0.01), which is sufficient for multi-mode optical waveguides, was obtained between the polymer films prepared with and without UV irradiation. The refractive index change was generated by cationic reaction between the silylated carbonyl ester groups of PASE and epoxy rings, which was initiated by UV irradiation and promoted by successive thermal curing. The difference in molecular structures, which results in the refractive index changes, were characterized by FT-IR measurements, and it was clarified that the films with and without UV irradiation showed PASE and PI structures, respectively. These films exhibited high thermal stability higher than 230°C, which are desirable for waveguide fabrication for optical inter-connects and lightwave circuits. Using this hybrid material, channel-type optical waveguides were successfully fabricated by the single-step photo-patterning procedure without development by aqueous or organic solvents, which is more facile and economical for waveguide mass-fabrication
The Subaru Deep Field Project: Lyman Emitters at Redshift of 6.6
We present new results of a deep optical imaging survey using a narrowband
filter () centered at 9196 \AA ~ together with , ,
, , and broadband filters in the sky area of the Subaru
Deep Field which has been promoted as one of legacy programs of the 8.2m Subaru
Telescope. We obtained a photometric sample of 58 Ly emitter candidates
at 6.5 -- 6.6 among strong -excess () objects together with a color criterion of . We then obtained optical spectra of 20 objects in our -excess
sample and identified at least nine Ly emitters at -- 6.6
including the two emitters reported by Kodaira et al. (2003). Since our
Ly emitter candidates are free from strong amplification of
gravitational lensing, we are able to discuss their observational properties
from a statistical point of view. Based on these new results, we obtain a lower
limit of the star formation rate density of yr Mpc at , being
consistent with our previous estimate. We discuss the nature of star-formation
activity in galaxies beyond .Comment: 49 pages, 16 figures, PASJ, Vol. 57, No. 1, in pres
Strukturierung des Unterrichts anhand der Lehrer:innenfragen. Perspektiven der Jugyo Kenkyu
Analog zum Leipziger Ansatz der qualitativen Unterrichtsforschung stellt das Team der Hiroshima Universität sein spezifisches Vorgehen der Lesson Study vor. Auf der Basis der normativen Lesson Study mit Fokus auf die Gruppenbildung im Klassenzimmer zeigt die Analyse ihre Praxisnähe und moniert ein gewisses Defizit der Untersuchungsmaterialien, die aus dem Kontext der qualitativen Unterrichtsforschung bereitgestellt wurden. Die forschungsmethodologische Differenz zeigt sich darin, dass der Fokus auf die Lehrer:innenfrage im qualitativen Zugang Prozesse der Offenheit und Lenkung und in der Jugyo Kenkyu Strukturen der Gruppenbildung in den Blick rückt. (DIPF/Orig.
Cooking Vessels, Volumes, and Venues: Evidence from LM IIIC Kavousi Vronda and Karphi
Glowacki, K.T., and L.P. Day. “Cooking Vessels, Volumes, and Venues: Evidence from LM IIIC Kavousi Vronda and Karphi.” Abstract of paper read at Διατροφικές συνήθειες και πρακτικές στην Κρήτη διαχρονικά [Dietary Habits and Practices in Crete over Time], Museum of Cretan Ethnology, Voroi, Crete, Greece, September 9–10, 2017.Our understanding of diet and culinary practices at the Late Minoan IIIC settlement sites of Kavousi Vronda and Karphi is based upon several different types of physical evidence that have been recovered through excavation. These include the botanical and faunal remains of plants and animals available to and consumed by the inhabitants; ceramic vessels used for the cooking and consumption of food and drink; built and fixed cooking installations, such as hearths and ovens; and the architectural spaces within the settlements where food preparation and consumption most likely took place. Each type of evidence is, by itself, incomplete and dependent upon differential preservation resulting from site formation processes specific to each archaeological context. Taken together, however, they allow us to gain important insights into key aspects of food cultivation, provisioning, processing, preparation, and convivial practices on Crete in the 12th and 11th centuries BC. In this paper, we will compare and contrast the evidence for food preparation and dining at each site, paying special attention to the forms and sizes of ceramic vessels used for cooking and consumption
Molecular Basis of White Adipose Tissue Remodeling That Precedes and Coincides With Hibernation in the Syrian Hamster, a Food-Storing Hibernator
Mammalian hibernators store fat extensively in white adipose tissues (WATs) during pre-hibernation period (Pre-HIB) to prepare for hibernation. However, the molecular mechanisms underlying the pre-hibernation remodeling of WAT have not been fully elucidated. Syrian hamsters, a food-storing hibernator, can hibernate when exposed to a winter-like short day photoperiod and cold ambient temperature (SD-Cold). Animals subjected to prolonged SD-Cold had smaller white adipocytes and beige-like cells within subcutaneous inguinal WAT (iWAT). Time-course analysis of gene expression with RNA-sequencing and quantitative PCR demonstrated that the mRNA expression of not only genes involved in lipid catabolism (lipolysis and beta-oxidation) but also lipid anabolism (lipogenesis and lipid desaturation) was simultaneously up-regulated prior to hibernation onset in the animals. The enhanced capacity of both lipid catabolism and lipid anabolism during hibernation period (HIB) is striking contrast to previous observations in fat-storing hibernators that only enhance catabolism during HIB. The mRNA expression of mTORC1 and PPAR signaling molecules increased, and pharmacological activation of PPARs indeed up-regulated lipid metabolism genes in iWAT explants from Syrian hamsters. These results suggest that the Syrian hamster rewires lipid metabolisms while preparing for hibernation to effectively utilize body fat and synthesize it from food intake during HIB
- …