37 research outputs found
Preparation of palm oil methyl esters for alkenyl succinic anhydride production
The fractions of fatty acid methyl esters (FAME) i.e. crude palm oil methyl esters (CPOME), RBD palm olein methyl esters (RBD Palm Olein ME) and used frying oil methyl esters (UFOME) rich in unsaturated fatty esters were used to prepare alkenyl succinic anhydrides (ASA). The fractions were obtained via fractional distillation that separated the unsaturated fatty esters from the saturated fatty esters. The fractions with the highest content of unsaturated fatty esters were reacted with maleic anhydride (MA) for 8 hours at 240oC with the MA/FAME ratio of 1.5. The reaction was conducted without catalyst and solvent. The crude alkenyl succinic anhydride (ASA) obtained was purified by column chromatography. The purified compound was characterised by FTIR
Biodiesel from low cost palm stearin using metal doped methoxide solid catalyst
Heterogeneous transesterification of vegetable oils offers an environmentally more attractive option for biodiesel production compared to the conventional homogeneous processes. Thus, the metal doped methoxide catalyst was developed in the present study which aims to improve the transesterification of low cost palm stearin (PS) and reduce the generation of waste. The catalyst was characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), nitrogen adsorption/desorption (BET) and temperature programmed desorption-CO2 (TPD-CO2) coupled with mass spectrometer. The optimum parameters were studied via response surface methodology (RSM) coupled with central composite design (CCD). The synthesized catalyst exhibited a high biodiesel yield at 94.7% with methanol to PS molar ratio of 6:1, 1% catalyst loading and less than 3 h of reaction time. The better catalytic activity of the aforementioned catalyst in the biodiesel reaction could be attributed to the presence of optimal number of catalytically active acid site density on its surface
Life cycle inventory of the commercial production of compost from oil palm biomass: a case study
This paper compared the life cycle inventory (LCI) obtained from three commercial oil palm biomass composting projects in Malaysia which use the open windrow composting system. The LCI was obtained and calculated based on the functional unit of 1 t of compost produced. The input of the inventory are the feed materials such as empty fruit bunches (EFB) and palm oil mill effluent (POME); and utilities which include electricity generated at palm oil mill and diesel used. Composting 2.0–2.5 t of EFB and 5.0–7.5 t of POME required diesel from 218.7 to 270.2 MJ and electricity from 0 to 6.8 MJ. It is estimated that the composting emitted from 0.01 to 0.02 t CO2eq/tcompost mainly from diesel used to operate machineries. Composting saved 65 % of time required for a complete degradation of POME when compared to ponding system, and 89 % of time required for a complete degradation of EFB compared to mulching. In terms of land required, it required 36 % less land as compared to ponding for POME and 99 % less land as compared to mulching for EFB. Based on the case study, diesel was found to be the main contributor to the environmental impact. There is a potential of upgrading the process to be more economical and environmental friendly. Using electricity as the source of energy has a lower footprint for the composting process. Instead of using raw POME, studies had reported that using treated POME either from anaerobic ponding or digested tank can accelerate the composting process
Testing of glyceryl monoesters for their antimicrobial susceptibility and their influence in emulsions.
Natural anti-microbial agents have received great attention in the cosmetic preservation area due to their well-documented safety profile. The anti-microbial activities of palm-based glyceryl monoesters (monolaurin, monocaprylin and monocaprin) were compared with commercially available tea tree oil and potassium sorbate against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Aspergillus niger, using the anti-microbial susceptibility testing procedure. Monolaurin was found to exhibit excellent inhibitory activity against S. aureus and Asp. niger, whereas potassium sorbate and tea tree oil had no activity against Asp. niger and S. aureus, respectively. Monocaprylin was shown to have low inhibitory activity against E. coli, and no inhibitory activity towards P. aeruginosa. On the other hand, tea tree oil had a higher inhibitory activity than monolaurin at 2% against E. coli but showed no activity against P. aeruginosa. Similar trends were observed for monocaprin and monolaurin which showed no anti-microbial activity towards P. aeruginosa as well as E. coli. Interestingly, the presence of monolaurin was not only effective as a preservative, but was also found to induce the formation of liquid crystals at concentrations as low as 0.5%. The formation of liquid crystals is said to enhance the stability and functionality of cosmetic emulsions
Binary metal-doped methoxide catalyst for biodiesel production from palm stearin
Heterogeneous transesterification of vegetable oils offers an environmentally more attractive option for biodiesel production compared with the conventional homogeneous processes. Thus, double metallic methoxide catalyst was developed in the present study, aiming to improve the transesterification of low-cost palm stearin (PS) and reduce waste generation. The physicochemical properties of the synthesized catalyst were studied by various techniques such as X-ray diffraction, field-emission scanning electron microscopy, temperature-programmed desorption-CO2 coupled with mass spectrometry, and Brunauer–Emmett–Teller surface area analyses. The optimum parameters were obtained via the response surface methodology coupled with a central composite design. Transesterification with the highest biodiesel yield of 98 % was obtained using 3 % catalyst loading, methanol-to-PS ratio of 11:1, 125 min reaction time, and 70°C temperature. This catalyst appears to be a promising candidate to replace homogeneous catalysts for biodiesel production, as it required short reaction duration and offered high reusability
Composting of oil palm biomass: Fourier transform-infrared and thermogravimetry analyses
This study investigates the effects of composting conditions on the chemical characteristics of compost from oil palm biomass. Three samples each of empty fruit bunches (EFB), palm oil mill effluent (POME) and compost were collected from three compost plants in Malaysia. The plants employed open windrow composting system. The Fourier transform-infrared spectra and thermogravimetry analysis were used to analyse the samples. It was found that composting resulted in the loss of aliphatic structures by formation of aromatic structures. This led to a stronger intramolecular bond and subsequently increased the stability of compost. The results of the study showed that the use of shredded EFB for composting is the most efficient way to produce compost. It required 55% less amount of time as compared to untreated EFB and 60% less amount of time as compared to treatment without addition of microbes
Effect of compositions in nanostructured lipid carriers (NLC) on skin hydration and occlusion.
Purpose: To study the effects of varying lipid concentrations, lipid and oil ratio, and the addition of propylene glycol and lecithin on the long-term physical stability of nanostructured lipid nanocarriers (NLC), skin hydration, and transepidermal water loss. Methods: The various NLC formulations (A1-A5) were prepared and their particle size, zeta potential, viscosity, and stability were analyzed. The formulations were applied on the forearms of the 20 female volunteers (one forearm of each volunteer was left untreated as a control). The subjects stayed for 30minutes in a conditioned room with their forearms uncovered to let the skin adapt to the temperature (22°C±2°C) and humidity (50%±2%) of the room. Skin hydration and skin occlusion were recorded at day one (before treatment) and day seven (after treatment). Three measurements for skin hydration and skin occlusion were performed in each testing area. Results: NLC formulations with the highest lipid concentration, highest solid lipid concentration, and additional propylene glycol (formulations A1, A2, and A5) showed higher physical stability than other formulations. The addition of propylene glycol into an NLC system helped to reduce the particle size of the NLC and enhanced its long-term physical stability. All the NLC formulations were found to significantly increase skin hydration compared to the untreated controls within 7 days. All NLC formulations exhibited occlusive properties as they reduced the transepidermal water loss within 7 days. This effect was more pronounced with the addition of propylene glycol or lecithin into an NLC formulation, whereby at least 60% reduction in transepidermal water loss was observed. Conclusion: NLCs with high lipid content, solid lipid content, phospholipid, and lecithin are a highly effective cosmetic delivery system for cosmetic topical applications that are designed to boost skin hydration
An improved method for the preparations of nanostructured lipid carriers containing heat-sensitive bioactives.
Heat-sensitive bioactive compounds such as β-carotene and tocols, are widely used in the pharmaceutical and cosmetic fields. Their chemical stability in delivery systems is one of the major concerns in the production of nanostructured lipid carriers (NLCs). A previously established high-temperature high-pressure homogenisation technique involved in the preparation of NLCs can cause degradation of heat-sensitive compounds. Therefore, a novel preparation process needs to be developed to minimise the degradation of heat-sensitive active compounds during the preparation of NLCs. In this work, modified methods A and B were designed to minimise the degradation of β-carotene and tocols during the production of NLCs. These methods improved the chemical stability of heat-sensitive bioactive compounds (β-carotene and tocols) significantly compared to the previously established method. The physical stability of the formulation was maintained throughout study duration
Nanostructured lipid carriers (NLC) for efficient delivery of palm phytonutrients
Palm phytonutrients found in crude palm oil consist of carotenes and tocols as well as other minor components including sterols, squalene, ubiquinones, coenzyme Q10 and phospholipids. Palm phytonutrients contains all the naturally occurring phytonutrients present in crude palm oil, whereas commercially available individual phytonutrients, such as Gold-tri E and Tocomin 50% mainly consist of palm tocotrienols. The encapsulation of palm phytonutrients by nanostructured lipid carriers (NLC) was investigated using Transmission Electron Microscopy. NLC was proven to effectively encapsulate palm phytonutrients in oil droplets. Based on the particle size analysis and rheological study, NLC was found to be the most physically stable delivery system when compared to the macro-emulsion and the nano-emulsion carriers. The long-term chemical stability of the palm phytonutrient using β-carotene as the prototype active in NLC was also determined. The degradation of β-carotene in NLC was lower when compared to the macro-emulsion and the nano-emulsion carriers. The efficacy of NLC as a delivery system and the effect of the addition of lecithin and propylene glycol to the NLC formulation were also studied. The parameters investigated were skin hydration and trans-epidermal water loss (TEWL). NLC with the presence of 1% lecithin and 2% propylene glycol were found to enhance skin hydration and prevent water loss