Methodology of non-equilibrium thermodynamics for kinetics research of CO2 capture by ionic liquids

In this paper, the methodology of non-equilibrium thermodynamics is introduced for kinetics research of CO 2 capture by ionic liquids, and the following three key scientific problems are proposed to apply the methodology in kinetics research of CO 2 capture by ionic liquids: reliable thermodynamic models, interfacial transport rate description and accurate experimental flux. The obtaining of accurate experimental flux requires reliable experimental kinetics data and the effective transport area in the CO 2 capture process by ionic liquids. Research advances in the three key scientific problems are reviewed systematically and further work is analyzed. Finally, perspectives of non-equilibrium thermodynamic research of the kinetics of CO 2 capture by ionic liquids are proposed.Validerad; 2012; 20120213 (xiajix

A Low Cost Fe3O4–Activated Biochar Electrode Sensor by Resource Utilization of Excess Sludge for Detecting Tetrabromobisphenol A

Owing to its ubiquity in natural water systems and the high toxicity of its accumulation in the human body, it is essential to develop simple and low-cost electrochemical sensors for the determination of 3,3′,5,5′-tetrabromobisphenol A (TBBPA). In this work, Fe3O4–activated biochar, which is based on excess sludge, was prepared and characterized using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR) and BET analysis to analyze its basic features. Subsequently, it was used to fabricate an electrochemical sensor for the detection of TBBPA. The electrochemical test results revealed that the Fe3O4–activated biochar film exhibited a larger active surface area, a lower charge transfer resistance and a higher accumulation efficiency toward TBBPA. Consequently, the peak current of TBBPA was significantly enhanced on the surface of the Fe3O4–activated biochar. The TBBPA sensing platform developed using the Fe3O4–activated biochar composite film, with relatively a lower detection limit (3.2 nM) and a wider linear range (5–1000 nM), was successfully utilized to determine TBBPA levels in water samples. In summary, the effective application of Fe3O4–activated biochar provided eco-friendly and sustainable materials for the development of a desirable high-sensitivity sensor for TBBPA detection

Modelling of mass transfer coupling with crystallization kinetics in microscale

Microstructure technologies have attracted interests in chemistry, chemical engineering, and biotechnology. To investigate the mass transfer of ions and crystallization of crystals in microscale and then to explain the formation mechanism of the porous structure materials, a microscale mathematical model for mass transfer processes coupling with local reactions is proposed in which the chemical potential gradient Δμ is used as the driving force to avoid the discontinuity of the kinetics equations in the micro-channels. Meanwhile, the dissolution kinetics of KCl at 298.15 K is measured to determine the dissolution rate constant kd and the average area of crystals Ac. The investigation for the fractional crystallization process of carnallite shows that the calculated mixing time versus channel width agree with the Einstein diffusion equation, which validates that the model can be used to describe the ion diffusion very well. Meanwhile, to have an accurate Δμ of KCl, in the channel width of or narrower than 2.0×10-6 m, it is enough to consider the diffusion only, while in the channel width of or wider than 2.0×10-5 m, diffusion should be coupled with reaction. The investigation also shows the vital of the consideration of the ionic activity coefficient for the investigated systems in micron scales. Moreover, the new formation mechanism of the porous structures in the inorganic material fabrication will be proposed from the process simulation for the synthesis of porous KCl, which will provide a reference for the porous structure formation in the advanced inorganic material synthesis.Validerad; 2010; 20100108 (ysko

Siderophore (from Synechococcus sp. PCC 7002)-Chelated Iron Promotes Iron Uptake in Caco-2 Cells and Ameliorates Iron Deficiency in Rats

Siderophores are iron chelators with low molecular weight secreted by microorganisms. Siderophores have the potential to become natural iron fortifiers. To explore the feasibility of the application of Synechococcus sp. PCC7002-derived siderophores as iron fortifiers, Synechococcus sp. PCC7002, as a carrier, was fermented to produce siderophores. The absorption mechanism and anemia intervention effect of siderophores-chelated iron (SCI) were studied through the polarized Caco-2 Cell monolayers and the rat model of iron-deficiency anemia, respectively. The results indicated that siderophores (from Synechococcus sp. PCC7002) had an enhancing effect on iron absorption in polarized Caco-2 cell monolayers. The main absorption site of SCI was duodenum with pH 5.5, and the absorption methods included endocytosis and DMT1, with endocytosis being dominant. The effect of sodium phytate on SCI was less than that of ferrous sulfate. Therefore, SCI could resist inhibitory iron absorption factors in polarized Caco-2 cell monolayers. SCI showed significantly higher relative bioavailability (133.58 ± 15.42%) than ferrous sulfate (100 ± 14.84%) and ferric citrate (66.34 ± 8.715%) in the rat model. Food intake, hemoglobin concentration, and hematocrit and serum iron concentration of rats improved significantly after Fe-repletion. Overall, this study indicated that siderophores derived from Synechococcus sp. PCC7002 could be an effective and feasible iron nutritive fortifier

Holey Graphitic Carbon Derived from Covalent Organic Polymers Impregnated with Nonprecious Metals for CO2 Capture from Natural Gas

Natural gas (NG), as a renewable and clean energy gas, is considered to be one of the most attractive energy carriers owing to its high calorific value, low price, and less pollution. Efficiently capturing CO2 from NG is a very important issue since CO2 reduces energy density of natural gas and corrodes equipment in the presence of water. In this study, the authors use holey graphene-like carbon derived from covalent organic polymers (COP) impregnated with nonprecious metals, i.e., COP graphene, as highly efficient separation materials. The dual-site LangmuirFreundlich adsorption model based ideal absorbed solution theory is applied to explore the adsorption selectivity. The experimental results along with first principles calculations show Mn-impregnated COP graphene exhibits greater CO2/CH4 selectivity than Fe and Co impregnated materials. Particularly, the selectivity of CCOPPMn reaches 11.4 at 298 K and 12 bars, which are much higher than those in many reported conventional porous materials and can be compared to the highest separation performance under similar condition. Importantly, all the three COP graphene show remarkably high regenerability (R &gt; 77%), which are much better than many reported promising zeolites, active carbon, and metal organic frameworks. Accordingly, COP graphene are promising cyclic adsorbents with high selectivity for separation and purification of CO2 from natural gas.</p