82,519 research outputs found
Robust variable selection for nonlinear models with diverging number of parameters
We focus on the problem of simultaneous variable selection and estimation for nonlinear models based on modal regression (MR), when the number of coefficients diverges with sample size. With appropriate selection of the tuning parameters, the resulting estimator is shown to be consistent and to enjoy the oracle properties
Design of a 2.4 GHz High-Performance Up-Conversion Mixer with Current Mirror Topology
In this paper, a low voltage low power up-conversion mixer, designed in a Chartered 0.18 ÎĽm RFCMOS technology, is proposed to realize the transmitter front-end in the frequency band of 2.4 GHz. The up-conversion mixer uses the current mirror topology and current-bleeding technique in both the driver and switching stages with a simple degeneration resistor. The proposed mixer converts an input of 100 MHz intermediate frequency (IF) signal to an output of 2.4 GHz radio frequency (RF) signal, with a local oscillator (LO) power of 2 dBm at 2.3 GHz. A comparison with conventional CMOS up-conversion mixer shows that this mixer has advantages of low voltage, low power consumption and high-performance. The post-layout simulation results demonstrate that at 2.4 GHz, the circuit has a conversion gain of 7.1 dB, an input-referred third-order intercept point (IIP3) of 7.3 dBm and a noise figure of 11.9 dB, while drawing only 3.8 mA for the mixer core under a supply voltage of 1.2 V. The chip area including testing pads is only 0.62Ă—0.65 mm2
Magnetoresistance of atomic-scale electromigrated nickel nanocontacts
We report measurements of the electron transport through atomic-scale
constrictions and tunnel junctions between ferromagnetic electrodes. Structures
are fabricated using a combination of e-beam lithography and controlled
electromigration. Sample geometries are chosen to allow independent control of
electrode bulk magnetizations. As junction size is decreased to the single
channel limit, conventional anisotropic magnetoresistance (AMR) increases in
magnitude, approaching the size expected for tunneling magnetoresistance (TMR)
upon tunnel junction formation. Significant mesoscopic variations are seen in
the magnitude and sign of the magnetoresistance, and no evidence is found of
large ballistic magnetoresistance effects.Comment: 3 pages, 3 figure
Robust variable selection in partially varying coefficient single-index model
By combining basis function approximations and smoothly clipped absolute deviation (SCAD) penalty, this paper proposes a robust variable selection procedure for a partially varying coefficient single-index model based on modal regression. The proposed procedure simultaneously selects significant variables in the parametric components and the nonparametric components. With appropriate selection of the tuning parameters, we establish the theoretical properties of our procedure, including consistency in variable selection and the oracle property in estimation. Furthermore, we also discuss the bandwidth selection and propose a modified expectation-maximization (EM)-type algorithm for the proposed estimation procedure. The finite sample properties of the proposed estimators are illustrated by some simulation examples.The research of Zhu is partially supported by National Natural Science Foundation of China (NNSFC) under Grants 71171075, 71221001 and 71031004. The research of Yu is supported by NNSFC under Grant 11261048
Recommended from our members
A Body-Nonlinear Green's Function Method with Viscous Dissipation Effects for Large-Amplitude Roll of Floating Bodies
A novel time-domain body-nonlinear Green’s function method is developed for evaluating large-amplitude roll damping of two-dimensional floating bodies with consideration of viscous dissipation effects. In the method, the instantaneous wetted surface of floating bodies is accurately considered, and the viscous dissipation effects are taken into account based on the “fairly perfect fluid” model. As compared to the method based on the existing inviscid body-nonlinear Green’s function, the newly proposed method can give a more accurate damping coefficient of floating bodies rolling on the free surface with large amplitudes according to the numerical tests and comparison with experimental data for a few cases related to ship hull sections with bilge keels
Sudden stoppage of rotor in a thermally driven rotary motor made from double-walled carbon nanotubes
In a thermally driven rotary motor made from double-walled carbon nanotubes, the rotor (inner tube) can be actuated to rotate within the stator (outer tube) when the environmental temperature is high enough. A sudden stoppage of the rotor can occur when the inner tube has been actuated to rotate at a stable high speed. To find the mechanisms of such sudden stoppages, eight motor models with the same rotor but different stators are built and simulated in the canonical NVT ensembles. Numerical results demonstrate that the sudden stoppage of the rotor occurs when the difference between radii is near 0.34 nm at a high environmental temperature. A smaller difference between radii does not imply easier activation of the sudden rotor stoppage. During rotation, the positions and electron density distribution of atoms at the ends of the motor show that a sp(1) bonded atom on the rotor is attracted by the sp(1) atom with the biggest deviation of radial position on the stator, after which they become two sp(2) atoms. The strong bond interaction between the two atoms leads to the loss of rotational speed of the rotor within 1 ps. Hence, the sudden stoppage is attributed to two factors: the deviation of radial position of atoms at the stator's ends and the drastic thermal vibration of atoms on the rotor in rotation. For a stable motor, sudden stoppage could be avoided by reducing deviation of the radial position of atoms at the stator's ends. A nanobrake can be, thus, achieved by adjusting a sp(1) atom at the ends of stator to stop the rotation of rotor quickly.The authors are grateful for financial support from the National Natural-Science-Foundation of China (Grant Nos. 50908190, 11372100)
- …