Incipient plasticity and fully plastic contact behavior of copper coated with a graphene layer

Cu coated with a graphene layer increases the elastic modulus from 163.4 GPa to 176.7 GPa, as analyzed for the initial elastic loading during nanoindentation by the Hertzian contact theory. This is attributed to stiffening, due to the ultra-high elastic modulus of the graphene layer, and the compressive in-plane residual stresses in the Cu surface volume introduced by the lattice mismatch between graphene and Cu. The graphene layer induces incipient plasticity, manifested by pop-in events during nanoindentation loading, at shallower indentation depths. This could be due to the compressive in-plane residual stress in the Cu surface volume; however, this compressive stress does not significantly change the critical resolved shear stress for the incipient plasticity. Even in the fully plastic contact region, at an indentation depth of 100 nm, the graphene layer affects the stress distribution underneath the indenter, resulting in a lower pile-up height. When considering this reduced pile-up height, the graphene layer is found to enhance elastic modulus by 5%, whereas it has no effect on hardness

Accelerated Life Testing to Predict Service Life and Reliability for an Appliance Door Hinge

Appliance manufacturers have traditionally performed physical testing using prototypes to assess reliability and service integrity of new product designs. However, for white goods where service lives are measured in years or decades, the use of endurance testing to analyze long time reliability is uneconomical. As accelerated life testing (ALT) is more efficient and less costly than traditional reliability testing, the methodology is finding increased usage by appliance manufacturers. In the present study, a simulation-based ALT approach was used to predict the service life of a polyacetal hinge cam from a consumer refrigerator. A predictive life stress model based on cumulative surface wear under accelerated stress conditions was developed and used to predict time to failure under consumer use. Results show that the life stress model demonstrated good agreement with performance testing data and reasonably predicts hinge life

F-18 FP-CIT PET in Multiple System Atrophy of the Cerebellar Type: Additional Role in Treatment

We evaluated the difference in the status of dopamine transporters (DATs) depending on Parkinsonism, cerebellar, and autonomic features using F-18 FP-CIT positron emission tomography (PET) in multiple system atrophy with cerebellar ataxia (MSA-C). We also assessed whether the DAT PET could be useful in the management of MSA-C. Forty-nine patients who were clinically diagnosed as possible to probable MSA-C were included. Based on the F-18 FP-CIT PET results, patients were classified into normal (n=25) and abnormal (n=24) scan groups. There were statistically significant differences in rigidity, bradykinesia, postural instability, asymmetry, and specific uptake ratio (SUR) between the two groups but no significant differences in tremor and cerebellar/autonomic symptoms. Dopaminergic medications were administered to 22 patients. All seven patients with normal scans showed no change, while 10 of the 15 patients with abnormal scans showed clinical improvement. There was a trend of a negative correlation between levodopa equivalent dose and SUR, but it was not statistically significant. DAT imaging, such as F-18 FP-CIT PET, may be useful in predicting the response to dopaminergic medication regardless of cerebellar/autonomic symptoms in MSA-C. In addition to being used for the diagnosis of the disease, it may be used as a treatment decision index

Self-rated health and risk of incident non-alcoholic fatty liver disease:A cohort study

Although self-rated health (SRH), a subjective measure of overall health status, associates with metabolic abnormalities, studies on the relationship between SRH and non-alcoholic fatty liver disease (NAFLD), a hepatic manifestation of metabolic syndrome, are limited. In this study, we evaluated whether or not SRH predicts the risk of incident NAFLD. This cohort study was performed in a sample of 148,313 Korean adults free of ultrasound-diagnosed NAFLD at baseline with annual or biennial follow-up for a median of 3.7 years. SRH and NAFLD were measured at baseline and follow-up visits. NAFLD was determined based on the ultrasound-diagnosed fatty liver without excessive alcohol consumption or any other cause. Hazard ratios with 95% confidence intervals were estimated via a parametric proportional hazards model. During 522,696.1 person-years of follow-up, 23,855 individuals with new-onset NAFLD were identified (incidence rate, 45.6 per 1,000 person-years). After adjustments for possible confounders including total calorie intake, sleep duration, and depressive symptoms, the multivariate-adjusted hazard ratios (95% confidence intervals) for incident NAFLD comparing good, fair, and poor or very poor SRH to very good SRH were 1.06 (0.97-1.14), 1.18 (1.09-1.27), and 1.24 (1.13-1.37), respectively. This association of SRH with incident NAFLD remained significant after accounting for changes in SRH and confounders during follow-up and was similar across clinically relevant subgroups. In a large-scale cohort study of apparently healthy Korean adults, poor SRH was independently and positively associated with incident NAFLD risk, indicating a predictive role of SRH as a health measure in NAFLD.</p

The selenoproteome of \u3ci\u3eClostridium\u3c/i\u3e sp. OhILAs: Characterization of anaerobic bacterial selenoprotein methionine sulfoxide reductase A

Selenocysteine (Sec) is incorporated into proteins in response to UGA codons. This residue is frequently found at the catalytic sites of oxidoreductases. In this study, we characterized the selenoproteome of an anaerobic bacterium, Clostridium sp. (also known as Alkaliphilus oremlandii) OhILA, and identified 13 selenoprotein genes, five of which have not been previously described. One of the detected selenoproteins was methionine sulfoxide reductase A (MsrA), an antioxidant enzyme that repairs oxidatively damaged methionines in a stereospecific manner. To date, little is known about MsrA from anaerobes. We characterized this selenoprotein MsrA which had a single Sec residue at the catalytic site but no cysteine (Cys) residues in the protein sequence. Its SECIS (Sec insertion sequence) element did not resemble those in Escherichia coli. Although with low translational efficiency, the expression of the Clostridium selenoprotein msrA gene in E. coli could be demonstrated by 75Se metabolic labeling, immunoblot analyses, and enzyme assays, indicating that its SECIS element was recognized by the E. coli Sec insertion machinery. We found that the Sec-containing MsrA exhibited at least a 20-fold higher activity than its Cys mutant form, indicating a critical role of Sec in the catalytic activity of the enzyme. Furthermore, our data revealed that the Clostridium MsrA was inefficiently reducible by thioredoxin, which is a typical reducing agent for MsrA, suggesting the use of alternative electron donors in this anaerobic bacterium that directly act on the selenenic acid intermediate and do not require resolving Cys residues

The selenoproteome of \u3ci\u3eClostridium\u3c/i\u3e sp. OhILAs: Characterization of anaerobic bacterial selenoprotein methionine sulfoxide reductase A

Selenocysteine (Sec) is incorporated into proteins in response to UGA codons. This residue is frequently found at the catalytic sites of oxidoreductases. In this study, we characterized the selenoproteome of an anaerobic bacterium, Clostridium sp. (also known as Alkaliphilus oremlandii) OhILA, and identified 13 selenoprotein genes, five of which have not been previously described. One of the detected selenoproteins was methionine sulfoxide reductase A (MsrA), an antioxidant enzyme that repairs oxidatively damaged methionines in a stereospecific manner. To date, little is known about MsrA from anaerobes. We characterized this selenoprotein MsrA which had a single Sec residue at the catalytic site but no cysteine (Cys) residues in the protein sequence. Its SECIS (Sec insertion sequence) element did not resemble those in Escherichia coli. Although with low translational efficiency, the expression of the Clostridium selenoprotein msrA gene in E. coli could be demonstrated by 75Se metabolic labeling, immunoblot analyses, and enzyme assays, indicating that its SECIS element was recognized by the E. coli Sec insertion machinery. We found that the Sec-containing MsrA exhibited at least a 20-fold higher activity than its Cys mutant form, indicating a critical role of Sec in the catalytic activity of the enzyme. Furthermore, our data revealed that the Clostridium MsrA was inefficiently reducible by thioredoxin, which is a typical reducing agent for MsrA, suggesting the use of alternative electron donors in this anaerobic bacterium that directly act on the selenenic acid intermediate and do not require resolving Cys residues

Biophysical and Biochemical Approaches for R-Loop Sensing Mechanism

An R-loop is a triple-stranded nucleic acid structure consisting of a DNA–RNA hybrid and a displaced single-stranded DNA. R-loops are associated with diverse biological reactions, such as immune responses and gene regulation, and dysregulated R-loops can cause genomic instability and replication stress. Therefore, investigating the formation, regulation, and elimination of R-loops is important for understanding the molecular mechanisms underlying biological processes and diseases related to R-loops. Existing research has primarily focused on R-loop detection. In this chapter, we introduce a variety of biochemical and biophysical techniques for R-loop sensing and visualization both in vivo and in vitro, including single-molecule imaging. These methods can be used to investigate molecular mechanisms underlying R-loop search and identification