Seasonal variations of atmospheric C2-C7 nonmethane hydrocarbons in Tokyo

Eighteen C2-C7 NMHCs (nonmethane hydrocarbons) were measured hourly during the Integrated Measurement Program for Aerosol and Oxidant Chemistry in Tokyo (IMPACT) measurement campaigns conducted in central Tokyo during four different periods (summer/autumn of 2003 and winter/summer of 2004). The ambient atmospheric concentrations of NMHCs showed an inverse correlation with wind speed and mixing height and were significantly affected by mesoscale weather conditions. The mixing ratio of isoprene tightly correlated with solar flux and temperature in summer, as it was dominantly emitted by the local vegetation. All the observed NMHCs except isoprene showed high correlation with each other in winter (r2 > 0.5), suggesting concurrent accumulation under stagnant condition and common sources. Emission ratios were calculated on the basis of the correlation with carbon monoxide and ethyne. Compared to the typical winter NMEC composition, during summer there was a significant increase (up to 7 times higher than wintertime) of C4-C5 alkanes from ftiel evaporation; of C2-C3 alkenes, n-hexane and benzene from chemical industry; and of toluene from local manufacturers, reflecting the temperature dependence of these evaporative emissions. In addition to the online measurements in Tokyo, canister sampling at a suburban site (Kisai) followed by multidimensional GC analyses was conducted during the summer campaign in 2004. The atmospheric concentrations of longer-lived compounds (≥ several days) at Kisai showed the buildup under sea breeze circulation. The average ambient, concentration of toluene was 2 times higher than that in central Tokyo, likely because of substantial emissions from local industries as reported in the prefectural statistics. Copyright 2007 by the American Geophysical Union

Neural Plasticity of Neonatal Hypoglossal Nerve for Effective Suckling

“This is a preprint of an article published in JOURNAL OF NEUROSCIENCE RESEARCH 2007; 85(11): 2518-2526”ArticleJournal of Neuroscience Research. 85(11): 2518-2526 (2007)journal articl

An analytical inversion method for determining regional and global emissions of greenhouse gases: Sensitivity studies and application to halocarbons

A new analytical inversion method has been developed to determine the regional and global emissions of long-lived atmospheric trace gases. It exploits in situ measurement data from three global networks and builds on backward simulations with a Lagrangian particle dispersion model. The emission information is extracted from the observed concentration increases over a baseline that is itself objectively determined by the inversion algorithm. The method was applied to two hydrofluorocarbons (HFC-134a, HFC-152a) and a hydrochlorofluorocarbon (HCFC-22) for the period January 2005 until March 2007. Detailed sensitivity studies with synthetic as well as with real measurement data were done to quantify the influence on the results of the a priori emissions and their uncertainties as well as of the observation and model errors. It was found that the global a posteriori emissions of HFC-134a, HFC-152a and HCFC-22 all increased from 2005 to 2006. Large increases (21%, 16%, 18%, respectively) from 2005 to 2006 were found for China, whereas the emission changes in North America (−9%, 23%, 17%, respectively) and Europe (11%, 11%, −4%, respectively) were mostly smaller and less systematic. For Europe, the a posteriori emissions of HFC-134a and HFC-152a were slightly higher than the a priori emissions reported to the United Nations Framework Convention on Climate Change (UNFCCC). For HCFC-22, the a posteriori emissions for Europe were substantially (by almost a factor 2) higher than the a priori emissions used, which were based on HCFC consumption data reported to the United Nations Environment Programme (UNEP). Combined with the reported strongly decreasing HCFC consumption in Europe, this suggests a substantial time lag between the reported time of the HCFC-22 consumption and the actual time of the HCFC-22 emission. Conversely, in China where HCFC consumption is increasing rapidly according to the UNEP data, the a posteriori emissions are only about 40% of the a priori emissions. This reveals a substantial storage of HCFC-22 and potential for future emissions in China. Deficiencies in the geographical distribution of stations measuring halocarbons in relation to estimating regional emissions are also discussed in the paper. Applications of the inversion algorithm to other greenhouse gases such as methane, nitrous oxide or carbon dioxide are foreseen for the future

In situ study of fiber structure development of poly(butylene terephthalate) in a continuous laser-heated drawing process

The structural development of poly(butylene terephthalate) (PBT) fibers was analyzed using in situ wide angle X-ray diffraction and fiber temperature measurements during CO2 laser-heated drawing, in which the necking position on the running fiber could be fixed by CO2 laser irradiation. The measured parameters were determined as functions of the elapsed time after necking with a time resolution of 0.3 ms. The as-spun PBT fibers, which exhibited a low-oriented alpha-crystalline structure, were drawn to a draw ratio of 5 using laser heating. The (001') reflection, which indicates a quasi-smectic fibrillar structure, was not observed before crystallization in contrast to measurements of poly(ethylene terephthalate) (PET) and poly(ethylene 2,6-naphthalene dicarboxylate) (PEN). The alpha-crystal was transformed into an oriented beta-form crystal at the necking position, and the developed beta-crystallites exhibited increased size and altered orientation <2 ms after necking. The fiber temperature increased rapidly at around T-g, and the rearrangement of the beta-crystal primarily occurred as the fiber's temperature rose from 100 to 160 degrees C. The oriented beta-crystal of the drawn fiber transformed into the oriented beta-crystal when the drawing tension was released. Polymer Journal (2012) 44, 1030-1035; doi: 10.1038/pj.2012.65; published online 18 April 2012ArticlePOLYMER JOURNAL. 44(10):1030-1035 (2012)journal articl