Development of functional knitted fabrics using yarn composed of polypyrrole coated cotton fibers

This study aimed at developing a knitted fabric using conductive staple spun yarn composed of polypyrrole coated cotton fibers and characterizing its thermal, optical and electrical properties, hydrophobic behavior as well as mechanical stiffness as a factor of weight percentage in fabrics. FTIR spectra, TGA and SEM verify that the polypyrrole ((PPy) has been successfully coated on cotton fibres before and after washing. The results showed that the fabrics containing polypyrrole had lower transmission and reflection percentage as compared with fabric without polypyrrole for wavelengths ranging from 200 to 20000 nm. At the investigated weight percentages, the thermal properties, hydrophobicity and electrical conductivity were found to be increased significantly with increasing amount of polypyrrole coated cotton fibers in the fabric. The thermal conductivity of fabrics with PPy coated fibers were found to be increased around 30-40%. The higher value of electrical conductivity (0.73 µS cm−1) was obtained in course direction and static water contact angle of 138° for fabric with higher polypyrrole content. The stiffness of the fabrics with PPy was found to increase about 10–20% in both wale wise and course wise directions with increase of polypyrrole coated cotton fibers in fabrics.The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The authors gratefully acknowledge financial support from the Sport & Fashion Management Pte Ltd, Singapore for this study

Economic Burden of Depressive Symptoms Conditions among Middle-Aged and Elderly People with Hypertension in China

People with hypertension are more prone to incur depressive symptoms, while depressive symptoms have an obvious influence on the healthy functioning, treatment, and management of hypertensive patients. However, there have been limited studies on the association between depression and the economic burden of hypertension. We used data from the 2018 China Health and Retirement Longitudinal Study (CHARLS) to estimate the additional annual direct and indirect economic burden of depressive symptoms among middle-aged and elderly hypertensive patients with a multivariable regression model. The depressive symptoms were associated with substantial additional direct and indirect economic burden. Compared with non-co-MHDS (non-co-morbid hypertension and depressive symptoms) patients, the direct economic burden of lower co-MHDS (co-morbid hypertension and depressive symptoms) patients and higher co-MHDS patients increased 1887.4 CNY and 5508.4 CNY, respectively. For indirect economic burden, the lower co-MHDS patients increased 331.2 CNY and the higher co-MHDS patients increased 636.8 CNY. Both direct and indirect economic burden were incremental with the aggravation of depressive symptoms. The results showed depressive symptoms increased total healthcare costs by increasing the utilization and expenditure of primary healthcare services. Depressive symptoms also led to economic loss of productivity, especially for agricultural workers. This study highlights the importance of mental healthcare for hypertensive patients

Inorganic additive-incorporated composites with infrared radiation performance for thermal management

Purpose: Personal thermal management in functional textiles is in increasing demand for health care, outdoor activity and energy saving. Thus, developing new strategies is highly desired for radiative cooling and/or heating by manipulation of the transmissivity, reflectivity and absorptivity of the textiles within solar energy and human body heat radiation ranges. Design/methodology/approach: Inorganic additives including TiO2, Fe2O3, carbon black (CB), graphene and mica were incorporated into polymer films. The inorganic additives' full spectrum properties and thermal responses were comprehensively investigated. Findings: The CB composite film showed the highest absorptivity over the full solar to human body radiation spectrum. The mica-white (mica-w) (mica coated with TiO2) and mica-red (mica-r) (mica coated with Fe2O3) composites showed the lowest solar energy absorptivity and a strong body heat radiation reflectivity. Furthermore, according to composites' thermal responses to the simulated solar and human body radiations, CB and mica are promising for both cooling and heating when applied in dual-functional thermal management textiles. Research limitations/implications: Research has limitation related the amount of additives which can be added to textile. When powder is added to polyester yarn, the amount is limited by 2–3%. When powder is added to the composite which is used for printing, the amount of powder is limited by 5%. Practical implications: A lot of apparel, especially sport apparel, contains prints. Decoration is one part of print application. Now, a lot of companies work under development of different additives, which provide additional properties to apparel. The closest targets for powder added to prints are cooling and heat retention. Quite often, inorganic additives possess dual properties: the inorganic additives may be heat reflective which his needed for heat retention, but may have high-thermal conductivity, which works well for cooling. Human body has complicated mechanism of heat exchange: convection, radiation and moisture evaporations play main role. The same additive may be cooling if there is a contact with skin but may be heating (IR reflective) if placed in the second or third layer. Thus, effect is needed to be studied first before real application. Originality/value: This work could provide a comprehensive guideline for the rational design and application of thermal management composite textile materials by revealing the full solar to human body radiation performance of a series of inorganic materials.The authors gratefully acknowledge the financial and technical support from Sportmaster Group of Companies Pte. Ltd

Analysis of the role of PANoptosis in seizures via integrated bioinformatics analysis and experimental validation

Background: Epilepsy is recognized as the most common chronic neurological condition among children, and hippocampal neuronal cell death has been identified as a crucial factor in the pathophysiological processes underlying seizures. In recent studies, PANoptosis, a newly characterized form of cell death, has emerged as a significant contributor to the development of various neurological disorders, including Alzheimer's disease, Parkinson's disease, and amyotrophic lateral sclerosis. PANoptosis involves the simultaneous activation of pyroptosis, apoptosis, and necroptosis within the same population of cells. However, its specific role in the context of seizures remains to be fully elucidated. Further investigation is required to uncover the precise involvement of PANoptosis in the pathogenesis of seizures and to better understand its potential implications for the development of targeted therapeutic approaches in epilepsy. Methods: In this study, the gene expression data of the hippocampus following the administration of kainic acid (KA) or NaCl was obtained from the Gene Expression Omnibus (GEO) database. The PANoptosis-related gene set was compiled from the GeneCards database and previous literature. Time series analysis was performed to analyze the temporal expression patterns of the PANoptosis-related genes. Gene set variation analysis (GSVA), Gene ontology (GO), and Kyoto encyclopedia of genes and genomes (KEGG) were employed to explore potential biological mechanisms underlying PANoptosis and its role in seizures. Weighted gene co-expression network analysis (WGCNA) and differential expression analysis were utilized to identify pivotal gene modules and PANoptosis-related genes associated with the pathophysiological processes underlying seizures. To validate the expression of PANoptosis-related genes, Western blotting or quantitative real-time polymerase chain reaction (qRT-PCR) assays were conducted. These experimental validations were performed in human blood samples, animal models, and cell models to verify the expression patterns of the PANoptosis-related genes and their relevance to epilepsy. Results: The GSVA analysis performed in this study demonstrated that PANoptosis-related genes have the potential to distinguish between the control group and KA-induced epileptic mice. This suggests that the expression patterns of these genes are significantly altered in response to KA-induced epilepsy. Furthermore, the Weighted gene co-expression network analysis (WGCNA) identified the blue module as being highly associated with epileptic phenotypes. This module consists of genes that exhibit correlated expression patterns specifically related to epilepsy. Within the blue module, 10 genes were further identified as biomarker genes for epilepsy. These genes include MLKL, IRF1, RIPK1, GSDMD, CASP1, CASP8, ZBP1, CASP6, PYCARD, and IL18. These genes likely play critical roles in the pathophysiology of epilepsy and could serve as potential biomarkers for diagnosing or monitoring the condition. Conclusion: In conclusion, our study suggests that the hippocampal neuronal cell death in epilepsy may be closely related to PANoptosis, a novel form of cell death, which provides insights into the underlying pathophysiological processes of epilepsy and helps the development of novel therapeutic approaches for epilepsy

Building 3D structures of vanadium pentoxide nanosheets and application as electrodes in supercapacitors

Various two-dimensional (2D) materials have recently attracted great attention owing to their unique properties and wide application potential in electronics, catalysis, energy storage, and conversion. However, large-scale production of ultrathin sheets and functional nanosheets remains a scientific and engineering challenge. Here we demonstrate an efficient approach for large-scale production of V2O5 nanosheets having a thickness of 4 nm and utilization as building blocks for constructing 3D architectures via a freeze-drying process. The resulting highly flexible V2O5 structures possess a surface area of 133 m(2) g(-1), ultrathin walls, and multilevel pores. Such unique features are favorable for providing easy access of the electrolyte to the structure when they are used as a supercapacitor electrode, and they also provide a large electroactive surface that advantageous in energy storage applications. As a consequence, a high specific capacitance of 451 F g(-1) is achieved in a neutral aqueous Na2SO4 electrolyte as the 3D architectures are utilized for energy storage. Remarkably, the capacitance retention after 4000 cycles is more than 90%, and the energy density is up to 107 W.h.kg(-1) at a high power density of 9.4 kW kg(-1)

Building 3D Structures of Vanadium Pentoxide Nanosheets and Application as Electrodes in Supercapacitors

Various two-dimensional (2D) materials have recently attracted great attention owing to their unique properties and wide application potential in electronics, catalysis, energy storage, and conversion. However, large-scale production of ultrathin sheets and functional nanosheets remains a scientific and engineering challenge. Here we demonstrate an efficient approach for large-scale production of V₂O₅ nanosheets having a thickness of 4 nm and utilization as building blocks for constructing 3D architectures via a freeze-drying process. The resulting highly flexible V₂O₅ structures possess a surface area of 133 m² g^–1, ultrathin walls, and multilevel pores. Such unique features are favorable for providing easy access of the electrolyte to the structure when they are used as a supercapacitor electrode, and they also provide a large electroactive surface that advantageous in energy storage applications. As a consequence, a high specific capacitance of 451 F g^–1 is achieved in a neutral aqueous Na₂SO₄ electrolyte as the 3D architectures are utilized for energy storage. Remarkably, the capacitance retention after 4000 cycles is more than 90%, and the energy density is up to 107 W·h·kg^–1 at a high power density of 9.4 kW kg^–1