Mandibular and glenoid fossa changes after bone-anchored maxillary protraction therapy in patients with UCLP: A 3-D preliminary assessment

To assess mandibular and glenoid fossa (GF) changes after bone-anchored maxillary protraction (BAMP) therapy in patients with unilateral complete cleft lip and palate (UCLP)

Challenges in measuring angles between craniofacial structures

Objective: Three-dimensional (3D) angular measurements between craniofacial planes pose challenges to quantify maxillary and mandibular skeletal discrepancies in surgical treatment planning. This study aims to compare the reproducibility and reliability of two modules to measure angles between planes or lines in 3D virtual surface models. Methodology: Twenty oriented 3D virtual surface models de-identified and constructed from CBCT scans were randomly selected. Three observers placed landmarks and oriented planes to determine angular measurements of pitch, roll and yaw using (1) 3D pre-existing planes, (2) 3D planes created from landmarks and (3) lines created from landmarks. Inter- and intra-observer reproducibility and repeatability were examined using the Intra-Class Correlation (ICC) test. One observer repeated the measurements with an interval of 15 days. ANOVA was applied to compare the 3 methods. Results: The three methods tested provided statistically similar, reproducible and reliable angular measurements of the facial structures. A strong ICC varying from 0.92 to 1.00 was found for the intra-observer agreement. The inter-observer ICC varied from 0.84 to 1.00. Conclusion: Measurements of 3D angles between facial planes in a common coordinate system are reproducible and repeatable either using 3D pre-existing planes, created based on landmarks or angles between lines created from landmarks

3D mandibular superimposition: Comparison of regions of reference for voxel-based registration

The aim was to evaluate three regions of reference (Björk, Modified Björk and mandibular Body) for mandibular registration testing them in a patients' CBCT sample.Mandibular 3D volumetric label maps were built from CBCTs taken before (T1) and after treatment (T2) in a sample of 16 growing subjects and labeled with eight landmarks. Registrations of T1 and T2 images relative to the different regions of reference were performed, and 3D surface models were generated. Seven mandibular dimensions were measured separately for each time-point (T1 and T2) in relation to a stable reference structure (lingual cortical of symphysis), and the T2-T1 differences were calculated. These differences were compared to differences measured between the superimposed T2 (generated from different regions of reference: Björk, Modified Björk and Mandibular Body) over T1 surface models. ICC and the Bland-Altman method tested the agreement of the changes obtained by nonsuperimposition measurements from the patients' sample, and changes between the overlapped surfaces after registration using the different regions of reference.The Björk region of reference (or mask) did work properly only in 2 of 16 patients. Evaluating the two other masks (Modified Björk and Mandibular body) on patients' scans registration, the concordance and agreement of the changes obtained from superimpositions (registered T2 over T1) compared to results obtained from non superimposed T1 and T2 separately, indicated that Mandibular Body mask displayed more consistent results.The mandibular body mask (mandible without teeth, alveolar bone, rami and condyles) is a reliable reference for 3D regional registration

A three‐dimensional analysis of primary failure of eruption in humans and mice

ObjectivesPrimary failure of eruption (PFE) is a genetic disorder exhibiting the cessation of tooth eruption. Loss‐of‐function mutations in parathyroid hormone (PTH)/parathyroid hormone‐related peptide (PTHrP) receptor (PTH/PTHrP receptor, PPR) were reported as the underlying cause of this disorder in humans. We showed in a PFE mouse model that PTHrP‐PPR signaling is responsible for normal dental follicle cell differentiation and tooth eruption. However, the mechanism underlying the eruption defect in PFE remains undefined. In this descriptive study, we aim to chronologically observe tooth eruption and root formation of mouse PFE molars through 3D microCT analyses.Setting and Sample PopulationTwo individuals with PFE were recruited at Showa University. A mouse PFE model was generated by deleting PPR specifically in PTHrP‐expressing dental follicle and divided into three groups, PPRfl/fl;R26RtdTomato/+(Control), PTHrP‐creER;PPRfl/+;R26RtdTomato/+(cHet), and PTHrP‐creER;PRRfl/fl;R26RtdTomato/+(cKO).Materials and MethodsImages from human PFE subjects were acquired by CBCT. All groups of mouse samples were studied at postnatal days 14, 25, 91, and 182 after a tamoxifen pulse at P3, and superimposition of 3D microCT images among three groups was rendered.ResultsMouse and human PFE molars exhibited a similar presentation in the 3D CT analyses. The quantitative analysis in mice demonstrated a statistically significant decrease in the eruption height of cKO first and second molars compared to other groups after postnatal day 25. Additionally, cKO molars demonstrated significantly shortened roots with dilacerations associated with the reduced interradicular bone height.ConclusionsMouse PFE molars erupt at a much slower rate compared to normal molars, associated with shortened and dilacerated roots and defective interradicular bones.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/154523/1/odi13249_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/154523/2/odi13249.pd

The Role of Ellis‐Van Creveld 2(EVC2) in Mice During Cranial Bone Development

EvC syndrome is a type of autosomal‐recessive chondrodysplasia. Previous case studies in patients suggest abnormal craniofacial development, in addition to dwarfism and tooth abnormalities. To investigate how craniofacial development is affected in EvC patients, surface models were generated from micro‐CT scans of control mice, Evc2 global mutant mice and Evc2 neural crest‐specific mutant mice. The anatomic landmarks were placed on the surface model to assess the morphological abnormalities in the Evc2 mutants. Through analyzing the linear and angular measurements between landmarks, we identified a smaller overall skull, shorter nasal bone, shorter frontal bone, and shorter cranial base in the Evc2 global mutants. By comparing neural crest‐specific Evc2 mutants with control mice, we demonstrated that the abnormalities within the mid‐facial regions are not accounted for by the Evc2 mutation within these regions. Additionally, we also identified disproportionate length to width ratios in the Evc2 mutants at all levels from anterior to posterior of the skull. Overall, this study demonstrates a more comprehensive analysis on the craniofacial morphological abnormalities in EvC syndrome and provides the developmental insight to appreciate the impact of Evc2 mutation within the neural crest cells on multiple aspects of skull deformities. Anat Rec, 2017. © 2017 Wiley Periodicals, Inc. Anat Rec, 301:46–55, 2018. © 2017 Wiley Periodicals, Inc.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/141635/1/ar23692_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/141635/2/ar23692.pd

Radiographic interpretation using high-resolution Cbct to diagnose degenerative temporomandibular joint disease

The objective of this study was to use high-resolution cone-beam computed images (hr-CBCT) to diagnose degenerative joint disease in asymptomatic and symptomatic subjects using the Diagnostic Criteria for Temporomandibular Disorders DC/TMD imaging criteria. This observational study comprised of 92 subjects age-sex matched and divided into two groups: clinical degenerative joint disease (c-DJD, n = 46) and asymptomatic control group (n = 46). Clinical assessment of the DJD and high-resolution CBCT images (isotropic voxel size of 0.08mm) of the temporomandibular joints were performed for each participant. An American Board of Oral and Maxillofacial Radiology certified radiologist and a maxillofacial radiologist used the DC/TMD imaging criteria to evaluate the radiographic findings, followed by a consensus of the radiographic evaluation. The two radiologists presented a high agreement (Cohen’s Kappa ranging from 0.80 to 0.87) for all radiographic findings (osteophyte, erosion, cysts, flattening, and sclerosis). Five patients from the c- DJD group did not present radiographic findings, being then classified as arthralgia. In the asymptomatic control group, 82.6% of the patients presented radiographic findings determinant of DJD and were then classified as osteoarthrosis or overdiagnosis. In conclusion, our results showed a high number of radiographic findings in the asymptomatic control group, and for this reason, we suggest that there is a need for additional imaging criteria to classify DJD properly in hr-CBCT images

Superimposition of maxillary digital models using the palatal rugae: Does ageing affect the reliability?

Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/150535/1/ocr12309.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/150535/2/ocr12309_am.pd

A Ciliary Protein EVC2/LIMBIN Plays a Critical Role in the Skull Base for Mid-Facial Development

Ellis-van Creveld (EvC) syndrome is an autosomal recessive chondrodysplastic disorder. Affected patients present a wide spectrum of symptoms including short stature, postaxial polydactyly, and dental abnormalities. We previously disrupted Evc2, one of the causative genes for EvC syndrome, in mice using a neural crest-specific, Cre-mediated approach (i.e., P0-Cre, referred to as Evc2 P0 mutants). Despite the fact that P0-Cre predominantly targets the mid-facial region, we reported that many mid-facial defects identified in Evc2 global mutants are not present in Evc2 P0 mutants at postnatal day 8 (P8). In the current study, we used multiple Cre lines (P0-Cre and Wnt1-Cre, respectively), to specifically delete Evc2 in neural crest-derived tissues and compared the resulting mid-facial defects at multiple time points (P8 and P28, respectively). While both Cre lines indistinguishably targeted the mid-facial region, they differentially targeted the anterior portion of the skull base. By comprehensively analyzing the shapes of conditional mutant skulls, we detected differentially affected mid-facial defects in Evc2 P0 mutants and Evc2 Wnt1 mutants. Micro-CT analysis of the skull base further revealed that the Evc2 mutation leads to a differentially affected skull base, caused by premature closure of the intersphenoid synchondrosis (presphenoidal synchondrosis), which limited the elongation of the anterior skull base during the postnatal development of the skull. Given the importance of the skull base in mid-facial bone development, our results suggest that loss of function of Evc2 within the skull base secondarily leads to many aspects of the mid-facial defects developed by the EvC syndrome

Periodontal morphology of maxillary canines orthodontically moved to the grafted alveolar cleft: a Cone-Beam Computed Tomography assessment

O objetivo deste trabalho foi avaliar a morfologia periodontal vestibular e lingual do canino permanente movimentado para a região enxertada em fissuras alveolares unilaterais com comprometimento do rebordo alveolar por meio de mensurações realizadas em imagens de exames de tomografia computadorizada cone-beam (TCCB). Esses valores foram comparados com o canino e incisivo lateral presentes no lado não comprometido pela fissura. A amostra consistiu de exames de TCCB de 30 pacientes com fissura unilateral em fase de contenção pós-tratamento ortodôntico. Foram realizados exames de TCCB com protocolo de FOV de 6cm, voxel de 0,25mm por 26,9 segundos. Os exames foram avaliados por apenas um ortodontista duas vezes em um intervalo de 30 dias para calcular o erro do método. A padronização da posição da cabeça foi determinada com o plano palatino paralelo ao solo. Foram realizados cortes axiais na altura da trifurcação do dente 16 para mensurar a espessura da tábua óssea vestibular e lingual do canino do lado da fissura (CF), canino do lado sem fissura (CsF) e incisivo lateral do lado sem fissura (IL). Para a avaliação do nível da crista óssea vestibular e lingual, foram realizados cortes parassagitais passando pelo centro da coroa de cada dente avaliado: CF, CsF e IL. Calculou-se a distância da junção cemento-esmalte (JCE) à crista óssea alveolar vestibular e lingual. Para a comparação dos valores do CF com o CsF e IL, foram utilizados o teste t e o teste de Wilcoxon a depender da distribuição de normalidade. A espessura da tábua óssea vestibular do CF se mostrou significantemente menos espessa do que a do CsF (p=0,002) e do que a do IL (p=0,001). Além disso, a distância da JCE à crista óssea se apresentou estatisticamente maior para o CF (p<0,001). A movimentação do canino superior permanente para a área de fissura alveolar enxertada consiste em uma opção terapêutica viável. No entanto, a condução do tratamento ortodôntico demanda cautela, incluindo uma movimentação lenta e a verificação da qualidade da mucosa ceratinizada.The purpose of this research was to assess the buccal and lingual periodontal morphology of the permanent canine moved to the grafted region in unilateral alveolar clefts with commitment of the alveolar bone by measuring images of conebeam computed tomography (CBCT) exams. These values were compared to the canine and lateral incisor present in the non-clefted side. The sample comprised CBCT exams of 30 patients with unilateral cleft lip and/or palate during retention period after orthodontic treatment. The protocol used for the CBCT exam was FOV of 6cm, voxel of 0,25mm for 26.9 seconds. The exams were assessed by one orthodontist two times with an interval of 30 days to assess intraoperator reliability. The standard position of the head was determined with the palatal plane parallel to the horizontal plane. Axial slices of the trifurcation of the right permanent molar were obtained to assess the buccal and lingual alveolar bone thickness of the canine in the clefted side (CF), the canine in the non-clefted side (CsF) and the lateral incisor in the non-clefted side (IL). To assess the buccal and lingual bone crest height, parassagital slices were obtained passing through the center of the crown of each evaluated teeth. It was calculated the distance form the cemento-enamel junction (CEJ) to the buccal and lingual alveolar bone crest. The comparison among the CF values with the CsF and IL was performed with the t test or the Wilcoxon test, depending on the distribution of normality. The buccal alveolar bone thickness of the CF is statistically thinner than the buccal alveolar bone thickness of the CsF (p=0,002) and of the IL (p=0,001). Other than that, the distance between the CEJ and the alveolar crest was significant higher for the CF (p<0,001). The movement of the upper permanent canine to the grafted alveolar consists in a viable therapeutic option. However, the orthodontic treatment demands caution, including a very slow movementation and the verification of the quality of the keratinized mucosa

Periodontal morphology of maxillary canines orthodontically moved to the grafted alveolar cleft: a Cone-Beam Computed Tomography assessment

O objetivo deste trabalho foi avaliar a morfologia periodontal vestibular e lingual do canino permanente movimentado para a região enxertada em fissuras alveolares unilaterais com comprometimento do rebordo alveolar por meio de mensurações realizadas em imagens de exames de tomografia computadorizada cone-beam (TCCB). Esses valores foram comparados com o canino e incisivo lateral presentes no lado não comprometido pela fissura. A amostra consistiu de exames de TCCB de 30 pacientes com fissura unilateral em fase de contenção pós-tratamento ortodôntico. Foram realizados exames de TCCB com protocolo de FOV de 6cm, voxel de 0,25mm por 26,9 segundos. Os exames foram avaliados por apenas um ortodontista duas vezes em um intervalo de 30 dias para calcular o erro do método. A padronização da posição da cabeça foi determinada com o plano palatino paralelo ao solo. Foram realizados cortes axiais na altura da trifurcação do dente 16 para mensurar a espessura da tábua óssea vestibular e lingual do canino do lado da fissura (CF), canino do lado sem fissura (CsF) e incisivo lateral do lado sem fissura (IL). Para a avaliação do nível da crista óssea vestibular e lingual, foram realizados cortes parassagitais passando pelo centro da coroa de cada dente avaliado: CF, CsF e IL. Calculou-se a distância da junção cemento-esmalte (JCE) à crista óssea alveolar vestibular e lingual. Para a comparação dos valores do CF com o CsF e IL, foram utilizados o teste t e o teste de Wilcoxon a depender da distribuição de normalidade. A espessura da tábua óssea vestibular do CF se mostrou significantemente menos espessa do que a do CsF (p=0,002) e do que a do IL (p=0,001). Além disso, a distância da JCE à crista óssea se apresentou estatisticamente maior para o CF (p<0,001). A movimentação do canino superior permanente para a área de fissura alveolar enxertada consiste em uma opção terapêutica viável. No entanto, a condução do tratamento ortodôntico demanda cautela, incluindo uma movimentação lenta e a verificação da qualidade da mucosa ceratinizada.The purpose of this research was to assess the buccal and lingual periodontal morphology of the permanent canine moved to the grafted region in unilateral alveolar clefts with commitment of the alveolar bone by measuring images of conebeam computed tomography (CBCT) exams. These values were compared to the canine and lateral incisor present in the non-clefted side. The sample comprised CBCT exams of 30 patients with unilateral cleft lip and/or palate during retention period after orthodontic treatment. The protocol used for the CBCT exam was FOV of 6cm, voxel of 0,25mm for 26.9 seconds. The exams were assessed by one orthodontist two times with an interval of 30 days to assess intraoperator reliability. The standard position of the head was determined with the palatal plane parallel to the horizontal plane. Axial slices of the trifurcation of the right permanent molar were obtained to assess the buccal and lingual alveolar bone thickness of the canine in the clefted side (CF), the canine in the non-clefted side (CsF) and the lateral incisor in the non-clefted side (IL). To assess the buccal and lingual bone crest height, parassagital slices were obtained passing through the center of the crown of each evaluated teeth. It was calculated the distance form the cemento-enamel junction (CEJ) to the buccal and lingual alveolar bone crest. The comparison among the CF values with the CsF and IL was performed with the t test or the Wilcoxon test, depending on the distribution of normality. The buccal alveolar bone thickness of the CF is statistically thinner than the buccal alveolar bone thickness of the CsF (p=0,002) and of the IL (p=0,001). Other than that, the distance between the CEJ and the alveolar crest was significant higher for the CF (p<0,001). The movement of the upper permanent canine to the grafted alveolar consists in a viable therapeutic option. However, the orthodontic treatment demands caution, including a very slow movementation and the verification of the quality of the keratinized mucosa