13 research outputs found
Steam Condensation Cooled by Piezoelectric Driven Oscillating Air Flow
The piezoelectric (PE) fan is first put forward to use in the air-cooled condenser, and to enhance the exhaust steam condensation of large thermal power plants. The cooling performance of such a method is evaluated through numerical simulations. The study shows that the surface heat transfer coefficient with PE fan at the air side is higher than that of a conventional axial flow (AF) fan. While at the steam side of the tube, the surface heat transfer coefficient is also enhanced owing to the obvious fluctuation of liquid film caused by the vibration of the piezoelectric fan.Key words: Piezoelectric fan; Air-cooling condenser; Numerical simulation; Surface heat transfer coefficien
Online Fatigue-Monitoring Models with Consideration of Temperature Dependent Properties and Varying Heat Transfer Coefficients
Thermal stress failure caused by alternating operational loads is the one of important damage mechanisms in the nuclear power plants. To evaluate the thermal stress responses, the Green’s function approach has been generally used. In this paper, a method to consider varying heat transfer coefficients when using the Green’s function method is proposed by using artificial parameter method and superposition principle. Time dependent heat transfer coefficient has been treated by using a modified fluid temperature and a constant heat transfer coefficient. Three-dimensional temperature and stress analyses reflecting entire geometry and heat transfer properties are required to obtain accurate results. An efficient and accurate method is confirmed by comparing its result with corresponding 3D finite element analysis results for a reactor pressure vessel (RPV). From the results, it is found that the temperature dependent material properties and varying heat transfer coefficients can significantly affect the peak stresses and the proposed method can reduce computational efforts with satisfactory accuracy
EtabFDC: an event generator in hadroproduction at LHC
The EtabFDC is a matrix-element event generator package for
hadroproduction at LHC. It generates events for all possible
parton-level leading-order processes with three commonly used
decay channels being implemented. The \pythia interface is used for
parton-shower and hadronization to obtain the hadronic events. The FORTRAN
codes of this package are generated by FDC (Feynman Diagram Calculation) system
automatically.Comment: 23 pages, 6 figure
Research and development of a high-quality thermal-stress online monitoring model for the 600 MW turbine
Evidence of a resonant structure in the cross section between 4.05 and 4.60 GeV
The cross section of the process e+e-→π+D0D*- for center-of-mass energies from 4.05 to 4.60 GeV is measured precisely using data samples collected with the BESIII detector operating at the BEPCII storage ring. Two enhancements are clearly visible in the cross section around 4.23 and 4.40 GeV. Using several models to describe the dressed cross section yields stable parameters for the first enhancement, which has a mass of 4228.6±4.1±6.3  MeV/c2 and a width of 77.0±6.8±6.3  MeV, where the first uncertainties are statistical and the second ones are systematic. Our resonant mass is consistent with previous observations of the Y(4220) state and the theoretical prediction of a DD¯1(2420) molecule. This result is the first observation of Y(4220) associated with an open-charm final state. Fits with three resonance functions with additional Y(4260), Y(4320), Y(4360), ψ(4415), or a new resonance do not show significant contributions from either of these resonances. The second enhancement is not from a single known resonance. It could contain contributions from ψ(4415) and other resonances, and a detailed amplitude analysis is required to better understand this enhancement