15,460 research outputs found
HOW AGN JETS HEAT the INTRACLUSTER MEDIUM - INSIGHTS from HYDRODYNAMIC SIMULATIONS
© 2016. The American Astronomical Society. All rights reserved. Feedback from active galactic nuclei (AGNs) is believed to prevent catastrophic cooling in galaxy clusters. However, how the feedback energy is transformed into heat, and how the AGN jets heat the intracluster medium (ICM) isotropically, still remain elusive. In this work, we gain insights into the relative importance of different heating mechanisms using three-dimensional hydrodynamic simulations including cold gas accretion and momentum-driven jet feedback, which are the most successful models to date in terms of reproducing the properties of cool cores. We find that there is net heating within two "jet cones" (within ∼30° from the axis of jet precession) where the ICM gains entropy by shock heating and mixing with the hot thermal gas within bubbles. Outside the jet cones, the ambient gas is heated by weak shocks, but not enough to overcome radiative cooling, therefore, forming a "reduced" cooling flow. Consequently, the cluster core is in a process of "gentle circulation" over billions of years. Within the jet cones, there is significant adiabatic cooling as the gas is uplifted by buoyantly rising bubbles; outside the cones, energy is supplied by the inflow of already-heated gas from the jet cones as well as adiabatic compression as the gas moves toward the center. In other words, the fluid dynamics self-adjusts such that it compensates and transports the heat provided by the AGN, and hence no fine-tuning of the heating profile of any process is necessary. Throughout the cluster evolution, turbulent energy is only at the percent level compared to gas thermal energy, and thus turbulent heating is not the main source of heating in our simulation
A unified constitutive model for asymmetric tension and compression creep-ageing behaviour of naturally aged Al-Cu-Li alloy
A set of unified constitutive equations is presented that predict the asymmetric tension and compression creep behaviour and recently observed double primary creep of pre-stretched/naturally aged aluminium-cooper-lithium alloy AA2050-T34. The evolution of the primary micro- and macro-variables related to the precipitation hardening and creep deformation of the alloy during creep age forming (CAF) are analysed and modelled. Equations for the yield strength evolution of the alloy, including an initial reversion and subsequent strengthening, are proposed based on a theory of concurrent dissolution, re-nucleation and growth of precipitates during artificial ageing. We present new observations of so-called double primary creep during the CAF process. This phenomenon is then predicted by introducing effects of interacting microstructures, including evolving precipitates, diffusing solutes and dislocations, into the sinh-law creep model. In addition, concepts of threshold creep stress σth and a microstructure-dependant creep variable H, which behave differently under different external stress directions, are proposed and incorporated into the creep model. This enables prediction of the asymmetric tension and compression creep-ageing behaviour of the alloy. Quantitative transmission electron microscopy (TEM) and related small-angle X-ray scattering (SAXS) analysis have been carried out for selected creep-aged samples to assist the development and calibration of the constitutive model. A good agreement has been achieved between the experimental results and the model. The model has the potential to be applied to creep age forming of other heat-treatable aluminium alloys
A totally Self-Checking Dynamic Asynchronous Datapath
This paper investigates the inherent totally self-checking (TSC) property of one type of dynamic asynchronous datapath based on Differential Cascode Voltage Logic (DCVSL). As a result, a totally self-checking dynamic asynchronous datapath architecture is proposed. It is simpler than other similar approaches and represents a new approach to fault tolerant design.published_or_final_versio
Spectrum and Thermodynamics of the one-dimensional supersymmetric t-J model with exchange and hopping
We derive the spectrum and the thermodynamics of the one-dimensional
supersymmetric t-J model with long range hopping and spin exchange using a set
of maximal-spin eigenstates. This spectrum confirms the recent conjecture that
the asymptotic Bethe-ansatz spectrum is exact. By empirical determining the
spinon degeneracies of each state, we are able to explicitly construct the free
energy.Comment: 13 pages, Latex, (published in PRB46, 6639 (1992)
A RAMP marker linked to the tobacco black shank resistant gene
Bulk segregant analysis (BSA) and randomly amplified microsatellite polymorphism (RAMP) were employed to analyze F2 individuals of the Yunyan 317×Hubei 517 to screen and characterize molecularmarkers linked to black shank resistant gene. A total of 800 arbitrary decamer oligonucleotide primerpairs were used for RAMP analysis. Primer pair GT (CA) 4/S89, producing one RAMP marker GT (CA)4/S89550, was tightly linked to the black shank resistant gene. Results of Southern blot suggest that the fragment GT (CA) 4/S89550 was existed in Yunyan 317 and resistant plants, and absent in Hubei 517.Linkage analysis was carried out using marker GT (CA) 4/S89550 on 752 black shank high-resistant individuals of F2 progenies from crossing between Yunyan 317 and Hubei 517. Our results indicated thatthe genetic distances between GT (CA) 4/S89550 and black shank resistant gene was 1.4cM
Determinant representations of scalar products for the open XXZ chain with non-diagonal boundary terms
With the help of the F-basis provided by the Drinfeld twist or factorizing
F-matrix for the open XXZ spin chain with non-diagonal boundary terms, we
obtain the determinant representations of the scalar products of Bethe states
of the model.Comment: Latex file, 28 pages, based on the talk given by W. -L. Yang at
Statphys 24, Cairns, Australia, 19-23 July, 201
Acoustic Disturbances in Galaxy Clusters
Galaxy cluster cores are pervaded by hot gas which radiates at far too high a
rate to maintain any semblance of a steady state; this is referred to as the
cooling flow problem. Of the many heating mechanisms that have been proposed to
balance radiative cooling, one of the most attractive is dissipation of
acoustic waves generated by Active Galactic Nuclei (AGN). Fabian (2005) showed
that if the waves are nearly adiabatic, wave damping due to heat conduction and
viscosity must be well below standard Coulomb rates in order to allow the waves
to propagate throughout the core. Because of the importance of this result, we
have revisited wave dissipation under galaxy cluster conditions in a way that
accounts for the self limiting nature of dissipation by electron thermal
conduction, allows the electron and ion temperature perturbations in the waves
to evolve separately, and estimates kinetic effects by comparing to a
semi-collisionless theory. While these effects considerably enlarge the toolkit
for analyzing observations of wavelike structures and developing a quantitative
theory for wave heating, the drastic reduction of transport coefficients
proposed in Fabian (2005) remains the most viable path to acoustic wave heating
of galaxy cluster cores
Master manipulator designed for highly articulated robotic instruments in single access surgery
The performance of a master-slave robotic system depends significantly on the ergonomics and the capability of its master device to correctly interface the user with the slave robot. Master manipulators generating commands in task space represent a commonly adopted solution for controlling a range of slave robots while retaining an ergonomic design. However, these devices present several drawbacks, such as requiring the use of clutching mechanics to compensate for the mismatch between slave and master workspaces, and the lack of capability to intuitively transmit important information such as specific joint limits to the user. In this paper, a novel joint-space master manipulator is presented. This manipulator emulates the kinematic structure of highly flexible surgical instruments which it is designed to control. This system uses 6 active degrees of freedom to compensate for its own weight, as well as to provide force feedback corresponding to the slave robot's joint limits. A force/torque sensor integrated at the end effector is used to relay user-generated forces and torques directly to specific joints. This is performed to counteract the friction stemming from structural constraints imposed by the kinematic design of the instruments. Finally, a usability study is carried out to test the validity of the system, proving that the instruments can be intuitively controlled even at the extremities of the workspace
Flavor SU(3) symmetry and QCD factorization in and decays
Using flavor SU(3) symmetry, we perform a model-independent analysis of
charmless decays. All the relevant
topological diagrams, including the presumably subleading diagrams, such as the
QCD- and EW-penguin exchange diagrams and flavor-singlet weak annihilation
ones, are introduced. Indeed, the QCD-penguin exchange diagram turns out to be
important in understanding the data for penguin-dominated decay modes. In this
work we make efforts to bridge the (model-independent but less quantitative)
topological diagram or flavor SU(3) approach and the (quantitative but somewhat
model-dependent) QCD factorization (QCDF) approach in these decays, by
explicitly showing how to translate each flavor SU(3) amplitude into the
corresponding terms in the QCDF framework. After estimating each flavor SU(3)
amplitude numerically using QCDF, we discuss various physical consequences,
including SU(3) breaking effects and some useful SU(3) relations among decay
amplitudes of and .Comment: 47 pages, 3 figures, 28 table
Forward-backward Asymmetry and Branching Ratio of B \rar K_1 \ell^+ \ell^- Transition in Supersymmetric Models
The mass eigen states and are mixture of the strange
members of two axial-vector SU(3) octet, and .
Taking into account this mixture, the forward-backward asymmetry and branching
ratio of B \rar K_1(1270,1400) \ell^+ \ell^- transitions are studied in the
framework of different supersymmetric models. It is found that the results have
considerable deviation from the standard model predictions. Any measurement of
these physical observables and their comparison with the results obtained in
this paper can give useful information about the nature of interactions beyond
the standard model.Comment: 14 pages, 4 figure
- …