Development and applications of ultrasound elastomicroscopy

2006-2007 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Preliminary research of sonomyography(SMG) based on correlation tracking

2006-2007 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

A pore-expanded supramolecular organic framework and its enrichment of photosensitizers and catalysts for visible-light-induced hydrogen production

A pore-expanded three-dimensional supramolecular organic framework SOF-bpb, with a previously unattained aperture size of 3.6 nm, has been constructed in water from the co-Assembly of cucurbit[8]uril (CB[8]) and a tetraphenylmethane-cored 1,4-bis(pyridin-4-yl)-benzene-Appended building block M1. The periodicity of SOF-bpb in water and in the solid state has been confirmed using synchrotron X-ray scattering and diffraction experiments. SOF-bpb can adsorb anionic and neutral Ru complex photosensitizers and anionic Wells-Dawson-Type and Keggin-Type polyoxometalates (POMs). The adsorption leads to an important enrichment effect, which remarkably increases the catalytic efficiency of the Ru complex-POM systems for visible light-induced reduction of protons to produce H . The expanded aperture of SOF-bpb also facilitates light absorption of the adsorbed Ru complex photosensitizers and electron transfer between excited complexes and the POM catalysts, leading to enhanced photocatalytic activities as compared with the prototypical SOF that has an aperture size of 2.1 nm. 2+ 2+ 2+

Synthesis of chiral zinc porphyrin and its thermodynamic study of coordination reactions with substituted imidazoles

2000-2001 > Academic research: refereed > Publication in refereed journalVersion of RecordPublishe

Identification of Mycobacterium tuberculosis Resistance to Common Antibiotics: An Overview of Current Methods and Techniques

Xue-Song Xiong,1,2,* Xue-Di Zhang,3,* Jia-Wei Yan,3 Ting-Ting Huang,1,2 Zhan-Zhong Liu,4 Zheng-Kang Li,5 Liang Wang,5 Fen Li1,2 1Department of Laboratory Medicine, The Affiliated Huai’an Hospital of Yangzhou University, Huai’an, Jiangsu Province, People’s Republic of China; 2Department of Laboratory Medicine, The Fifth People’s Hospital of Huai’an, Huai’an, Jiangsu Province, People’s Republic of China; 3Department of Laboratory Medicine, Xuzhou Infectious Diseases Hospital, Xuzhou, Jiangsu Province, People’s Republic of China; 4Department of Pharmacy, Xuzhou Infectious Diseases Hospital, Xuzhou, Jiangsu Province, People’s Republic of China; 5Department of Laboratory Medicine, Guangdong Provincial People’s Hospital (Guangdong Academy of Medical Sciences), Southern Medical University, Guangzhou, Guangdong Province, People’s Republic of China*These authors contributed equally to this workCorrespondence: Liang Wang; Fen Li, Email [email protected]; [email protected]: Multidrug-resistant tuberculosis (MDR-TB) is an essential cause of tuberculosis treatment failure and death of tuberculosis patients. The rapid and reliable profiling of Mycobacterium tuberculosis (MTB) drug resistance in the early stage is a critical research area for public health. Then, most traditional approaches for detecting MTB are time-consuming and costly, leading to the inappropriate therapeutic schedule resting on the ambiguous information of MTB drug resistance, increasing patient economic burden, morbidity, and mortality. Therefore, novel diagnosis methods are frequently required to meet the emerging challenges of MTB drug resistance distinguish. Considering the difficulty in treating MDR-TB, it is urgently required for the development of rapid and accurate methods in the identification of drug resistance profiles of MTB in clinical diagnosis. This review discussed recent advances in MTB drug resistance detection, focusing on developing emerging approaches and their applications in tangled clinical situations. In particular, a brief overview of antibiotic resistance to MTB was present, referred to as intrinsic bacterial resistance, consisting of cell wall barriers and efflux pumping action and acquired resistance caused by genetic mutations. Then, different drug susceptibility test (DST) methods were described, including phenotype DST, genotype DST and novel DST methods. The phenotype DST includes nitrate reductase assay, RocheTM solid ratio method, and liquid culture method and genotype DST includes fluorescent PCR, GeneXpert, PCR reverse dot hybridization, ddPCR, next-generation sequencing and gene chips. Then, novel DST methods were described, including metabolism testing, cell-free DNA probe, CRISPR assay, and spectral analysis technique. The limitations, challenges, and perspectives of different techniques for drug resistance are also discussed. These methods significantly improve the detection sensitivity and accuracy of multidrug-resistant tuberculosis (MRT) and can effectively curb the incidence of drug-resistant tuberculosis and accelerate the process of tuberculosis eradication. Keywords: MTB, antibiotic resistance, Raman spectroscopy, rapid detectio

Characterization of calcium deposition induced by Synechocystis sp PCC6803 in BG11 culture medium

Calcium carbonate (CaCO3) crystals in their preferred orientation were obtained in BG11 culture media inoculated with Synechocystis sp. PCC6803 (inoculated BG11). In this study, the features of calcium carbonate deposition were investigated. Inoculated BG11 in different calcium ion concentrations was used for the experimental group, while the BG11 culture medium was used for the control group. The surface morphologies of the calcium carbonate deposits in the experimental and control groups were determined by scanning and transmission electron microscopy. The deposits were analyzed by electronic probe micro-analysis, Fourier transform infrared spectrum, X-ray diffraction, thermal gravimetric analysis and differential scanning calorimetry. The results show that the surfaces of the crystals in the experimental group were hexahedral in a scaly pattern. The particle sizes were micrometer-sized and larger than those in the control group. The deposits of the control group contained calcium (Ca), carbon (C), oxygen (O), phosphorus (P), iron (Fe), copper (Cu), zinc (Zn), and other elements. The deposits in the experimental group contained Ca, C, and O only. The deposits of both groups contained calcite. The thermal decomposition temperature of the deposits in the control group was lower than those in the experimental group. It showed that the CaCO3 deposits of the experimental group had higher thermal stability than those of the control group. This may be due to the secondary metabolites produced by the algae cells, which affect the carbonate crystal structure and result in a close-packed structure. The algae cells that remained after thermal weight loss were heavier in higher calcium concentrations in BG11 culture media. There may be more calcium-containing crystals inside and outside of these cells. These results shall be beneficial for understanding the formation mechanism of carbonate minerals.Calcium carbonate (CaCO3) crystals in their preferred orientation were obtained in BG11 culture media inoculated with Synechocystis sp. PCC6803 (inoculated BG11). In this study, the features of calcium carbonate deposition were investigated. Inoculated BG11 in different calcium ion concentrations was used for the experimental group, while the BG11 culture medium was used for the control group. The surface morphologies of the calcium carbonate deposits in the experimental and control groups were determined by scanning and transmission electron microscopy. The deposits were analyzed by electronic probe micro-analysis, Fourier transform infrared spectrum, X-ray diffraction, thermal gravimetric analysis and differential scanning calorimetry. The results show that the surfaces of the crystals in the experimental group were hexahedral in a scaly pattern. The particle sizes were micrometer-sized and larger than those in the control group. The deposits of the control group contained calcium (Ca), carbon (C), oxygen (O), phosphorus (P), iron (Fe), copper (Cu), zinc (Zn), and other elements. The deposits in the experimental group contained Ca, C, and O only. The deposits of both groups contained calcite. The thermal decomposition temperature of the deposits in the control group was lower than those in the experimental group. It showed that the CaCO3 deposits of the experimental group had higher thermal stability than those of the control group. This may be due to the secondary metabolites produced by the algae cells, which affect the carbonate crystal structure and result in a close-packed structure. The algae cells that remained after thermal weight loss were heavier in higher calcium concentrations in BG11 culture media. There may be more calcium-containing crystals inside and outside of these cells. These results shall be beneficial for understanding the formation mechanism of carbonate minerals

Construction and Application of an Electronic Spatiotemporal Expression Profile and Gene Ontology Analysis Platform Based on the EST Database of the Silkworm, Bombyx mori

An Expressed Sequence Tag (EST) is a short sub-sequence of a transcribed cDNA sequence. ESTs represent gene expression and give good clues for gene expression analysis. Based on EST data obtained from NCBI, an EST analysis package was developed (apEST). This tool was programmed for electronic expression, protein annotation and Gene Ontology (GO) category analysis in Bombyx mori (L.) (Lepidoptera: Bombycidae). A total of 245,761 ESTs (as of 01 July 2009) were searched and downloaded in FASTA format, from which information for tissue type, development stage, sex and strain were extracted, classified and summed by running apEST. Then, corresponding distribution profiles were formed after redundant parts had been removed. Gene expression profiles for one tissue of different developmental stages and from one development stage of the different tissues were attained. A housekeeping gene and tissue-and-stage-specific genes were selected by running apEST, contrasting with two other online analysis approaches, microarray-based gene expression profile on SilkDB (BmMDB) and EST profile on NCBI. A spatio-temporal expression profile of catalase run by apEST was then presented as a three-dimensional graph for the intuitive visualization of patterns. A total of 37 query genes confirmed from microarray data and RT—PCR experiments were selected as queries to test apEST. The results had great conformity among three approaches. Nevertheless, there were minor differences between apEST and BmMDB because of the unique items investigated. Therefore, complementary analysis was proposed. Application of apEST also led to the acquisition of corresponding protein annotations for EST datasets and eventually for their functions. The results were presented according to statistical information on protein annotation and Gene Ontology (GO) category. These all verified the reliability of apEST and the operability of this platform. The apEST can also be applied in other species by modifying some parameters and serves as a model for gene expression study for Lepidoptera

Side-by-Side In(OH)3 and In2O3 Nanotubes: Synthesis and Optical Properties

A simple and mild wet-chemical approach was developed for the synthesis of one-dimensional (1D) In(OH)3 nanostructures. By calcining the 1D In(OH)3 nanocrystals in air at 250 °C, 1D In2O3 nanocrystals with the same morphology were obtained. TEM results show that both 1D In(OH)3 and 1D In2O3 are composed of uniform nanotube bundles. SAED and XRD patterns indicate that 1D In(OH)3 and 1D In2O3 nanostructures are single crystalline and possess the same bcc crystalline structure as the bulk In(OH)3 and In2O3, respectively. TGA/DTA analyses of the precursor In(OH)3 and the final product In2O3 confirm the existence of CTAB molecules, and its content is about 6%. The optical absorption band edge of 1D In2O3 exhibits an evident blueshift with respect to that of the commercial In2O3 powders, which is caused by the increasing energy gap resulted from decreasing the grain size. A relatively strong and broad purple-blue emission band centered at 440 nm was observed in the room temperature PL spectrum of 1D In2O3 nanotube bundles, which was mainly attributed to the existence of the oxygen vacancies

Controllable Synthesis of Magnesium Oxysulfate Nanowires with Different Morphologies

One-dimensional magnesium oxysulfate 5Mg(OH)2 · MgSO4 · 3H2O (abbreviated as 513MOS) with high aspect ratio has attracted much attention because of its distinctive properties from those of the conventional bulk materials. 513MOS nanowires with different morphologies were formed by varying the mixing ways of MgSO4 · 7H2O and NH4OH solutions at room temperature followed by hydrothermal treatment of the slurries at 150 °C for 12 h with or without EDTA. 513MOS nanowires with a length of 20–60 μm and a diameter of 60–300 nm were prepared in the case of double injection (adding MgSO4 · 7H2O and NH4OH solutions simultaneously into water), compared with the 513MOS with a length of 20–30 μm and a diameter of 0.3–1.7 μm in the case of the single injection (adding MgSO4 · 7H2O solution into NH4OH solution). The presence of minor amount of EDTA in the single injection method led to the formation of 513MOS nanowires with a length of 100–200 μm, a diameter of 80–200 nm, and an aspect ratio of up to 1000. The analysis of the experimental results indicated that the hydrothermal solutions with a lower supersaturation were favorable for the preferential growth of 513MOS nanowires along b axis