147,119 research outputs found
Recommended from our members
Fire resistance of steel beam to square CFST column composite joints using RC slabs: Experiments and numerical studies
In this paper, experimental investigation and numerical simulation of steel beam to square concrete-filled steel tube (CFST) column composite joints that use reinforced concrete (RC) slabs subjected to localized and global fire conditions are presented. Eight joints were tested under the ISO 834 fire standard, and the effect of different parameters including the load ratio of beams, the beam-to-column ratio of linear stiffness, and different fire scenarios was studied during testing. The failure patterns and the thermal responses of the structural members including the temperature distribution, axial displacement of columns, vertical deflection of the beam ends, and fire resistance of the joints were recorded and discussed. The results show that tube buckling of the square CFST columns, flange buckling of the steel beams, and separation between the top flange of the steel beams and the RC slabs were the primary failure patterns of this type of joint. Moreover, the temperatures of structural members within the connection zone were lower than those in the other regions. Compared with other factors, the load ratio of the beams demonstrated a significant influence on the displacement of the structural members and the fire resistance of the joints. A three-dimensional finite element analysis (FEA) model was built to simulate the fire performance of this type of composite joint. The simulation results were compared to the test results in terms of failure patterns, temperature distributions, displacements, and fire resistances, and good agreement in general was achieved. Finally, the FEA model was adopted to examine the effect of parameters on the fire resistance of the composite joints with axial and flexural constraints applied at the ends of the beam
Robust Kalman filtering for discrete time-varying uncertain systems with multiplicative noises
Copyright [2002] IEEE. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.In this paper, a robust finite-horizon Kalman filter is designed for discrete time-varying uncertain systems with both additive and multiplicative noises. The system under consideration is subject to both deterministic and stochastic uncertainties. Sufficient conditions for the filter to guarantee an optimized upper bound on the state estimation error variance for admissible uncertainties are established in terms of two discrete Riccati difference equations. A numerical example is given to show the applicability of the presented method
Searching for a preferred direction with Union2.1 data
A cosmological preferred direction was reported from the type Ia supernovae
(SNe Ia) data in recent years. We use the Union2.1 data to give a simple
classification of such studies for the first time. Because the maximum
anisotropic direction is independent of isotropic dark energy models, we adopt
two cosmological models (CDM, CDM) for the hemisphere comparison
analysis and CDM model for dipole fit approach. In hemisphere
comparison method, the matter density and the equation of state of dark energy
are adopted as the diagnostic qualities in the CDM model and CDM
model, respectively. In dipole fit approach, we fit the fluctuation of distance
modulus. We find that there is a null signal for the hemisphere comparison
method, while a preferred direction () for the dipole fit method. This result indicates
that the dipole fit is more sensitive than the hemisphere comparison method.Comment: 8 pages, 2 figures, accepted for publication in MNRA
H∞ control for networked systems with random communication delays
Copyright [2006] IEEE. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.This note is concerned with a new controller design problem for networked systems with random communication delays. Two kinds of random delays are simultaneously considered: i) from the controller to the plant, and ii) from the sensor to the controller, via a limited bandwidth communication channel. The random delays are modeled as a linear function of the stochastic variable satisfying Bernoulli random binary distribution. The observer-based controller is designed to exponentially stabilize the networked system in the sense of mean square, and also achieve the prescribed H∞ disturbance attenuation level. The addressed controller design problem is transformed to an auxiliary convex optimization problem, which can be solved by a linear matrix inequality (LMI) approach. An illustrative example is provided to show the applicability of the proposed method
Recommended from our members
Mixed H2/H∞ filtering for uncertain systems with regional pole assignment
Copyright [2005] IEEE. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Brunel University's products or services. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to [email protected]. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.The mixed H2/H∞ filtering problem for uncertain linear continuous-time systems with regional pole assignment is considered. The purpose of the problem is to design an uncertainty-independent filter such that, for all admissible parameter uncertainties, the following filtering requirements are simultaneously satisfied: 1) the filtering process is asymptotically stable; 2) the poles of the filtering matrix are located inside a prescribed region that compasses the vertical strips, horizontal strips, disks, or conic sectors; 3) both the H2 norm and the H∞ norm on the respective transfer functions are not more than the specified upper bound constraints. We establish a general framework to solve the addressed multiobjective filtering problem completely. In particular, we derive necessary and sufficient conditions for the solvability of the problem in terms of a set of feasible linear matrix inequalities (LMIs). An illustrative example is given to illustrate the design procedures and performances of the proposed method
- …