Processing of Alumina Honeycomb Catalyst Substrates and Studies on Methyl Cellulose Binder Burn Out Kinetics

Alumina based honeycomb catalyst substrates are extrusion processed with methyl cellulose as a binder. Binder being organic in nature it reduces inter-particle friction thereby improves the flow ability while shaping and further enhances the mechanical strength of the green bodies. However, these binders are removed while further heat treatments through engineered heating schedules and any improper and non-uniform removal of these additives becomes a potential source of defects while processing cycles. In the present study, weight loss of the green honeycomb specimens was recorded as a function of temperature through Theromogarvimetric - Differential Scanning Calorimetric (TG-DSC) measurements at varying heating rates. A low heating rate less than 10oC/min up to 550oC is found to be desirable for binder removal. TG -Weight loss (x) with respect to the temperature can be regarded as x = (Mo - MT)/ (M0 –Mf), where, Mo: initial weight, MT: sample weight at temperature T and Mf: the final weight. Arrhenius parameters, for the thermal decomposition of the samples were determined by assuming a first order chemical reaction using the integral form of the rate law dx/dt = Ae ( -E/RT) f ( x). The plot of dx/dt vs 1/T exhibited a straight line and the activation energy for the burnout of methyl cellulose is estimated to be around 110 kJ/mole. The honeycomb samples were also subjected to sintering and the samples exhibited a highly porous microstructure and a compressive strength of 80 Kg/cm2 suitable for catalyst coating

Transverse instability and its long-term development for solitary waves of the (2+1)-Boussinesq equation

The stability properties of line solitary wave solutions of the (2+1)-dimensional Boussinesq equation with respect to transverse perturbations and their consequences are considered. A geometric condition arising from a multi-symplectic formulation of this equation gives an explicit relation between the parameters for transverse instability when the transverse wavenumber is small. The Evans function is then computed explicitly, giving the eigenvalues for transverse instability for all transverse wavenumbers. To determine the nonlinear and long time implications of transverse instability, numerical simulations are performed using pseudospectral discretization. The numerics confirm the analytic results, and in all cases studied, transverse instability leads to collapse.Comment: 16 pages, 8 figures; submitted to Phys. Rev.

Scattering mechanism in a step-modulated subwavelength metal slit: a multi-mode multi-reflection analysis

In this paper, the scattering/transmission inside a step-modulated subwavelength metal slit is investigated in detail. We firstly investigate the scattering in a junction structure by two types of structural changes. The variation of transmission and reflection coefficients depending on structural parameters are analyzed. Then a multi-mode multi-reflection model based on ray theory is proposed to illustrate the transmission in the step-modulated slit explicitly. The key parts of this model are the multi-mode excitation and the superposition procedure of the scatterings from all possible modes, which represent the interference and energy transfer happened at interfaces. The method we use is an improved modal expansion method (MEM), which is a more practical and efficient version compared with the previous one [Opt. Express 19, 10073 (2011)]. In addition, some commonly used methods, FDTD, scattering matrix method, and improved characteristic impedance method, are compared with MEM to highlight the preciseness of these methods.Comment: 25 pages, 9 figure

A 2-Component Generalization of the Camassa-Holm Equation and Its Solutions

An explicit reciprocal transformation between a 2-component generalization of the Camassa-Holm equation, called the 2-CH system, and the first negative flow of the AKNS hierarchy is established, this transformation enables one to obtain solutions of the 2-CH system from those of the first negative flow of the AKNS hierarchy. Interesting examples of peakon and multi-kink solutions of the 2-CH system are presented.Comment: 15 pages, 16 figures, some typos correcte

Action research in physical education: focusing beyond myself through cooperative learning

This paper reports on the pedagogical changes that I experienced as a teacher engaged in an action research project in which I designed and implemented an indirect, developmentally appropriate and child‐centred approach to my teaching. There have been repeated calls to expunge – or at least rationalise – the use of traditional, teacher‐led practice in physical education. Yet despite the advocacy of many leading academics there is little evidence that such a change of approach is occurring. In my role as teacher‐as‐researcher I sought to implement a new pedagogical approach, in the form of cooperative learning, and bring about a positive change in the form of enhanced pupil learning. Data collection included a reflective journal, post‐teaching reflective analysis, pupil questionnaires, student interviews, document analysis, and non‐participant observations. The research team analysed the data using inductive analysis and constant comparison. Six themes emerged from the data: teaching and learning, reflections on cooperation, performance, time, teacher change, and social interaction. The paper argues that cooperative learning allowed me to place social and academic learning goals on an even footing, which in turn placed a focus on pupils’ understanding and improvement of skills in athletics alongside their interpersonal development

Complete Muon Cooling Channel Design and Simulations

Considerable progress has been made in developing promising subsystems for muon beam cooling channels to provide the extraordinary reduction of emittances required for an energy-frontier muon collider. However, it has not yet been demonstrated that the various proposed cooling subsystems can be consolidated into an integrated end-to-end design. Presented here are concepts to address the matching of transverse emittances between subsystems through an extension of the theoretical framework of the Helical Cooling Channel (HCC), which allows a general analytical approach to guide the transition from one set of cooling channel parameters to another

Fermi Surfaces of Diborides: MgB2 and ZrB2

We provide a comparison of accurate full potential band calculations of the Fermi surfaces areas and masses of MgB2 and ZrB2 with the de Haas-van Alphen date of Yelland et al. and Tanaka et al., respectively. The discrepancies in areas in MgB2 can be removed by a shift of sigma-bands downward with respect to pi-bands by 0.24 eV. Comparison of effective masses lead to orbit averaged electron-phonon coupling constants lambda(sigma)=1.3 (both orbits), lambda(pi)=0.5. The required band shifts, which we interpret as an exchange attraction for sigma states beyond local density band theory, reduces the number of holes from 0.15 to 0.11 holes per cell. This makes the occurrence of superconductivity in MgB2 a somewhat closer call than previously recognized, and increases the likelihood that additional holes can lead to an increased Tc.Comment: 7 pages including 4 figure

Higher order WKB corrections to black hole entropy in brick wall formalism

We calculate the statistical entropy of a quantum field with an arbitrary spin propagating on the spherical symmetric black hole background by using the brick wall formalism at higher orders in the WKB approximation. For general spins, we find that the correction to the standard Bekenstein-Hawking entropy depends logarithmically on the area of the horizon. Furthermore, we apply this analysis to the Schwarzschild and Schwarzschild-AdS black holes and discuss our results.Comment: 21 pages, published versio

Unbiased, optimal, and in-betweens: the trade-off in discrete finite impulse response filtering

In this survey, the authors examine the trade-off between the unbiased, optimal, and in-between solutions in finite impulse response (FIR) filtering. Specifically, they refer to linear discrete real-time invariant state-space models with zero mean noise sources having arbitrary covariances (not obligatorily delta shaped) and distributions (not obligatorily Gaussian). They systematically analyse the following batch filtering algorithms: unbiased FIR (UFIR) subject to the unbiasedness condition, optimal FIR (OFIR) which minimises the mean square error (MSE), OFIR with embedded unbiasedness (EU) which minimises the MSE subject to the unbiasedness constraint, and optimal UFIR (OUFIR) which minimises the MSE in the UFIR estimate. Based on extensive investigations of the polynomial and harmonic models, the authors show that the OFIR-EU and OUFIR filters have higher immunity against errors in the noise statistics and better robustness against temporary model uncertainties than the OFIR and Kalman filters

Vector meson production and nucleon resonance analysis in a coupled-channel approach for energies m_N < sqrt(s) < 2 GeV I: pion-induced results and hadronic parameters

We present a nucleon resonance analysis by simultaneously considering all pion- and photon-induced experimental data on the final states gamma N, pi N, 2 pi N, eta N, K Lambda, K Sigma, and omega N for energies from the nucleon mass up to sqrt(s) = 2 GeV. In this analysis we find strong evidence for the resonances P_{31}(1750), P_{13}(1900), P_{33}(1920), and D_{13}(1950). The omega N production mechanism is dominated by large P_{11}(1710) and P_{13}(1900) contributions. In this first part, we present the results of the pion-induced reactions and the extracted resonance and background properties with emphasis on the difference between global and purely hadronic fits.Comment: 54 pages, 26 figures, discussion extended, typos corrected, references updated, to appear in Phys. Rev.